scholarly journals Mesoporous Bioglasses Enriched with Bioactive Agents for Bone Repair, with a Special Highlight of María Vallet-Regí’s Contribution

Pharmaceutics ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 202
Author(s):  
Antonio J. Salinas ◽  
Pedro Esbrit

Throughout her impressive scientific career, Prof. María Vallet-Regí opened various research lines aimed at designing new bioceramics, including mesoporous bioactive glasses for bone tissue engineering applications. These bioactive glasses can be considered a spin-off of silica mesoporous materials because they are designed with a similar technical approach. Mesoporous glasses in addition to SiO2 contain significant amounts of other oxides, particularly CaO and P2O5 and therefore, they exhibit quite different properties and clinical applications than mesoporous silica compounds. Both materials exhibit ordered mesoporous structures with a very narrow pore size distribution that are achieved by using surfactants during their synthesis. The characteristics of mesoporous glasses made them suitable to be enriched with various osteogenic agents, namely inorganic ions and biopeptides as well as mesenchymal cells. In the present review, we summarize the evolution of mesoporous bioactive glasses research for bone repair, with a special highlight on the impact of Prof. María Vallet-Regí´s contribution to the field.

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
Hamid Ait Said ◽  
Hassan Noukrati ◽  
Hicham Ben Youcef ◽  
Ayoub Bayoussef ◽  
Hassane Oudadesse ◽  
...  

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.


Author(s):  
Peili Gao ◽  
Tingting Liu ◽  
Zhenyu Zhang ◽  
Fanning Meng ◽  
Run-Ping Ye ◽  
...  

Polymers ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 159
Author(s):  
Víctor Santos-Rosales ◽  
Inés Ardao ◽  
Leticia Goimil ◽  
Jose Luis Gomez-Amoza ◽  
Carlos A. García-González

Demand of scaffolds for hard tissue repair increases due to a higher incidence of fractures related to accidents and bone-diseases that are linked to the ageing of the population. Namely, scaffolds loaded with bioactive agents can facilitate the bone repair by favoring the bone integration and avoiding post-grafting complications. Supercritical (sc-)foaming technology emerges as a unique solvent-free approach for the processing of drug-loadenu7d scaffolds at high incorporation yields. In this work, medicated poly(ε-caprolactone) (PCL) scaffolds were prepared by sc-foaming coupled with a leaching process to overcome problems of pore size tuning of the sc-foaming technique. The removal of the solid porogen (BA, ammonium bicarbonate) was carried out by a thermal leaching taking place at 37 °C and in the absence of solvents for the first time. Macroporous scaffolds with dual porosity (50–100 µm and 200–400 µm ranges) were obtained and with a porous structure directly dependent on the porogen content used. The processing of ketoprofen-loaded scaffolds using BA porogen resulted in drug loading yields close to 100% and influenced its release profile from the PCL matrix to a relevant clinical scenario. A novel solvent-free strategy has been set to integrate the incorporation of solid porogens in the sc-foaming of medicated scaffolds.


1999 ◽  
Vol 121 (3) ◽  
pp. 377-386 ◽  
Author(s):  
T. V. Valkov ◽  
C. S. Tan

In a two-part paper, key computed results from a set of first-of-a-kind numerical simulations on the unsteady interaction of axial compressor stators with upstream rotor wakes and tip leakage vortices are employed to elucidate their impact on the time-averaged performance of the stator. Detailed interrogation of the computed flow field showed that for both wakes and tip leakage vortices, the impact of these mechanisms can be described on the same physical basis. Specifically, there are two generic mechanisms with significant influence on performance: reversible recovery of the energy in the wakes/tip vortices (beneficial) and the associated nontransitional boundary layer response (detrimental). In the presence of flow unsteadiness associated with rotor wakes and tip vortices, the efficiency of the stator under consideration is higher than that obtained using a mixed-out steady flow approximation. The effects of tip vortices and wakes are of comparable importance. The impact of stator interaction with upstream wakes and vortices depends on the following parameters: axial spacing, loading, and the frequency of wake fluctuations in the rotor frame. At reduced spacing, this impact becomes significant. The most important aspect of the tip vortex is the relative velocity defect and the associated relative total pressure defect, which is perceived by the stator in the same manner as a wake. In Part 1, the focus will be on the framework of technical approach, and the interaction of stator with the moving upstream rotor wakes.


2021 ◽  
Vol 11 (12) ◽  
pp. 2313-2320
Author(s):  
Jian Zhao ◽  
Wei Li ◽  
Xin Dong ◽  
Jiying Chen

Based on bioactive glasses (BG) of 58S, sol–gel method is used to prepare strontium oxide substituted bioactive glasses (SrO-BG) with different strontium content. SrO-BG and nano hydroxyapatite (HAp) composite materials were synthesized using precipitation method. The phase composition and morphologies of the prepared materials were examined by x-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The dissolution and bio-mineralization of SrO-BG and SrO-BG/HAp composites in SBF are investigated by immersion method. The effects of secretion components of macrophages regulated by strontium doped SrO-BG/HAp composites on the osteogenic differentiation (OD) of bone marrow mesenchymal stem cells (BMSCs) are analyzed. The results demonstrate that the SrO-BG can inhibit the dissolution of BG. Different proportions of SrO-BG/HAp composites show good ability to induce HAp in SBF. The bio-mineralization ability of SrO-BG/HAp composites increases with the increase of SrO-BG content. The results of dissolution behavior and bio-mineralization of SrO-BG/HAp composite show that the dissolution rate of each ion can be controlled by adjusting the content of SrO-BG in the composite, and then the degradation rate can effectively be controlled. The results of in vitro experiments show that SrO-BG/HAp composites with 2%, 5% and 8% strontium content are more effective in promoting M2 polarization of macrophages than SrO-BG/HAp composites with 0% strontium content. Among them, 5% strontium doped SrO-BG/HAp has the strongest effect on M2 polarization of macrophages, and the secretion of macrophages regulated by 5% strontium doped SrO-BG/HAp composite is more conducive to bone repair.


2021 ◽  
Vol 10 (16) ◽  
pp. 3554
Author(s):  
Dionysios J. Papachristou ◽  
Stavros Georgopoulos ◽  
Peter V. Giannoudis ◽  
Elias Panagiotopoulos

Fracture-healing is a complex multi-stage process that usually progresses flawlessly, resulting in restoration of bone architecture and function. Regrettably, however, a considerable number of fractures fail to heal, resulting in delayed unions or non-unions. This may significantly impact several aspects of a patient’s life. Not surprisingly, in the past few years, a substantial amount of research and number of clinical studies have been designed, aiming at shedding light into the cellular and molecular mechanisms that regulate fracture-healing. Herein, we present the current knowledge on the pathobiology of the fracture-healing process. In addition, the role of skeletal cells and the impact of marrow adipose tissue on bone repair is discussed. Unveiling the pathogenetic mechanisms that govern the fracture-healing process may lead to the development of novel, smarter, and more effective therapeutic strategies for the treatment of fractures, especially of those with large bone defects.


Atmosphere ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 48 ◽  
Author(s):  
Changhan Bae ◽  
Byeong-Uk Kim ◽  
Hyun Cheol Kim ◽  
Chul Yoo ◽  
Soontae Kim

This study identified the key chemical components based on an analysis of the seasonal variations of ground level PM2.5 concentrations and its major chemical constituents (sulfate, nitrate, ammonium, organic carbon, and elemental carbon) in the Seoul Metropolitan Area (SMA), over a period of five years, ranging from 2012 to 2016. It was found that the mean PM2.5 concentration in the SMA was 33.7 μg/m3, while inorganic ions accounted for 53% of the total mass concentration. The component ratio of inorganic ions increased by up to 61%–63% as the daily mean PM2.5 concentration increased. In spring, nitrate was the dominant component of PM2.5, accounting for 17%–32% of the monthly mean PM2.5 concentrations. In order to quantify the impact of long-range transport on the SMA PM2.5, a set of sensitivity simulations with the community multiscale air-quality model was performed. Results show that the annual averaged impact of Chinese emissions on SMA PM2.5 concentrations ranged from 41% to 44% during the five years. Chinese emissions’ impact on SMA nitrate ranged from 50% (winter) to 67% (spring). This result exhibits that reductions in SO2 and NOX emissions are crucial to alleviate the PM2.5 concentration. It is expected that NOX emission reduction efforts in China will help decrease PM2.5 concentrations in the SMA.


2020 ◽  
Vol 8 (7) ◽  
pp. 1456-1465 ◽  
Author(s):  
Leonie Deilmann ◽  
Oliver Winter ◽  
Bianca Cerrutti ◽  
Henrik Bradtmüller ◽  
Christopher Herzig ◽  
...  

B2O3 doped (0.5–15 mol%) ordered mesoporous bioactive glasses were synthesized via sol–gel based evaporation-induced self-assembly using P123 as a structure directing agent and characterized by biokinetic, mechanical and structural investigations.


2020 ◽  
Vol 6 (17) ◽  
pp. eaaz7822 ◽  
Author(s):  
Chung-Sung Lee ◽  
Soyon Kim ◽  
Jiabing Fan ◽  
Hee Sook Hwang ◽  
Tara Aghaloo ◽  
...  

Biomaterial delivery of bioactive agents and manipulation of stem cell fate are an attractive approach to promote tissue regeneration. Here, smoothened agonist sterosome is developed using small-molecule activators [20S-hydroxycholesterol (OHC) and purmorphamine (PUR)] of the smoothened protein in the hedgehog pathway as carrier and cargo. Sterosome presents inherent osteoinductive property even without drug loading. Sterosome is covalently immobilized onto three-dimensional scaffolds via a bioinspired polydopamine intermediate to fabricate a hybrid scaffold for bone regeneration. Sterosome-immobilized hybrid scaffold not only provides a favorable substrate for cell adhesion and proliferation but also delivers bioactive agents in a sustained and spatially targeted manner. Furthermore, this scaffold significantly improves osteogenic differentiation of bone marrow stem cells through OHC/PUR-mediated synergistic activation of the hedgehog pathway and also enhances bone repair in a mouse calvarial defect model. This system serves as a versatile biomaterial platform for many applications, including therapeutic delivery and endogenous regenerative medicine.


2016 ◽  
Vol 2 (1) ◽  
Author(s):  
Barbara Pföss ◽  
Reinhard Conradt

AbstractThe interaction between bioactive glass and body fluid is crucial for the special properties of this material, therefore a large number of experimental data is available in literature. However, a frame for systematic interpretation of these results in terms of understanding the mechanisms at the interface between glass and body medium and the relation between glass composition and dissolution behavior is still missing. For two multicomponent bioactive glasses, 45S5 and 13-93, the Gibbs energies of the glassy material on one side and their aqueous system on the other side were calculated individually. The difference between solid material and aqueous system further constitutes the pH dependent Gibbs energy of hydration, ∆Ghydr. The impact of glass compositions and glassy or crystalline state on ∆Ghydr is demonstrated referring to chemical durability. Along considerations regarding the aqueous system, the thermodynamic calculations proof the precipitation of hydroxyapatite inwater and simulated body fluid for a systemcontaining P2O5 and Ca2+. In the course of deriving the Gibbs energies for bioactive glass compositions via constitutional compounds, bioactive behavior is discussed from the point of coexisting equilibrium phases in the system of Na2O-CaO-SiO2.


Sign in / Sign up

Export Citation Format

Share Document