scholarly journals A Molecular Simulation Study of Silica/Polysulfone Mixed Matrix Membrane for Mixed Gas Separation

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2199
Author(s):  
Khadija Asif ◽  
Serene Sow Mun Lock ◽  
Syed Ali Ammar Taqvi ◽  
Norwahyu Jusoh ◽  
Chung Loong Yiin ◽  
...  

Polysulfone-based mixed matrix membranes (MMMs) incorporated with silica nanoparticles are a new generation material under ongoing research and development for gas separation. However, the attributes of a better-performing MMM cannot be precisely studied under experimental conditions. Thus, it requires an atomistic scale study to elucidate the separation performance of silica/polysulfone MMMs. As most of the research work and empirical models for gas transport properties have been limited to pure gas, a computational framework for molecular simulation is required to study the mixed gas transport properties in silica/polysulfone MMMs to reflect real membrane separation. In this work, Monte Carlo (MC) and molecular dynamics (MD) simulations were employed to study the solubility and diffusivity of CO2/CH4 with varying gas concentrations (i.e., 30% CO2/CH4, 50% CO2/CH4, and 70% CO2/CH4) and silica content (i.e., 15–30 wt.%). The accuracy of the simulated structures was validated with published literature, followed by the study of the gas transport properties at 308.15 K and 1 atm. Simulation results concluded an increase in the free volume with an increasing weight percentage of silica. It was also found that pure gas consistently exhibited higher gas transport properties when compared to mixed gas conditions. The results also showed a competitive gas transport performance for mixed gases, which is more apparent when CO2 increases. In this context, an increment in the permeation was observed for mixed gas with increasing gas concentrations (i.e., 70% CO2/CH4 > 50% CO2/CH4 > 30% CO2/CH4). The diffusivity, solubility, and permeability of the mixed gases were consistently increasing until 25 wt.%, followed by a decrease for 30 wt.% of silica. An empirical model based on a parallel resistance approach was developed by incorporating mathematical formulations for solubility and permeability. The model results were compared with simulation results to quantify the effect of mixed gas transport, which showed an 18% and 15% percentage error for the permeability and solubility, respectively, in comparison to the simulation data. This study provides a basis for future understanding of MMMs using molecular simulations and modeling techniques for mixed gas conditions that demonstrate real membrane separation.

2015 ◽  
Vol 3 (33) ◽  
pp. 17273-17281 ◽  
Author(s):  
Lin Hao ◽  
Kuo-Sung Liao ◽  
Tai-Shung Chung

Photo-oxidative PIM-1 incorporated with ZIF-71 form well-dispersed mixed-matrix membranes with enhanced gas transport properties. These membranes have impressive separation performance for CO2/CH4 and O2/N2.


2016 ◽  
Vol 148 ◽  
pp. 1259-1265 ◽  
Author(s):  
Norwahyu Jusoh ◽  
Yin Fong Yeong ◽  
Kok Keong Lau ◽  
Azmi Mohd Shariff

2014 ◽  
Vol 2 (25) ◽  
pp. 9835-9843 ◽  
Author(s):  
Hongchao Mao ◽  
Suobo Zhang

Rigid and bulky tetraphenylmethane pendant group containing poly(amine-imide)s were designed and prepared for gas separation applications.


Computation ◽  
2020 ◽  
Vol 8 (2) ◽  
pp. 28 ◽  
Author(s):  
Alessio Fuoco ◽  
Marcello Monteleone ◽  
Elisa Esposito ◽  
Rosaria Bruno ◽  
Jesús Ferrando-Soria ◽  
...  

The most widely used method to measure the transport properties of dense polymeric membranes is the time lag method in a constant volume/pressure increase instrument. Although simple and quick, this method provides only relatively superficial, averaged data of the permeability, diffusivity, and solubility of gas or vapor species in the membrane. The present manuscript discusses a more sophisticated computational method to determine the transport properties on the basis of a fit of the entire permeation curve, including the transient period. The traditional tangent method and the fitting procedure were compared for the transport of six light gases (H2, He, O2, N2, CH4, and CO2) and ethane and ethylene in mixed matrix membranes (MMM) based on Pebax®1657 and the metal–organic framework (MOF) CuII2(S,S)-hismox·5H2O. Deviations of the experimental data from the theoretical curve could be attributed to the particular MOF structure, with cavities of different sizes. The fitting procedure revealed two different effective diffusion coefficients for the same gas in the case of methane and ethylene, due to the unusual void morphology in the MOFs. The method was furthermore applied to mixed gas permeation in an innovative constant-pressure/variable-volume setup with continuous analysis of the permeate composition by an on-line mass-spectrometric residual gas analyzer. This method can provide the diffusion coefficient of individual gas species in a mixture, during mixed gas permeation experiments. Such information was previously inaccessible, and it will greatly enhance insight into the mixed gas transport in polymeric or mixed matrix membranes.


Sign in / Sign up

Export Citation Format

Share Document