scholarly journals Numerical Simulation of Solids Conveying in Grooved Feed Sections of Single Screw Extruders

Polymers ◽  
2022 ◽  
Vol 14 (2) ◽  
pp. 256
Author(s):  
Florian Brüning ◽  
Volker Schöppner
Keyword(s):  
Numerical Simulation ◽  
Analytical Modeling ◽  
Flow Behavior ◽  
Analytical Calculation ◽  
Statistical Design ◽  
Simulation Software ◽  
Special Focus ◽  
Statistical Design Of Experiments ◽  
Complex Flow ◽  
Single Screw Extruders

For plastic processing extruders with grooved feed sections, the design of the feed section by means of analytical calculation models can be useful to reduce experimental costs. However, these models include assumptions and simplifications that can significantly decrease the prediction accuracy of the throughput due to complex flow behavior. In this paper, the accuracy of analytical modeling for calculating the throughput in a grooved barrel extruder is verified based on a statistical design of experiments. A special focus is placed on the assumptions made in the analytics of a backpressure-independent throughput, the assumption of a block flow and the differentiation of the solids conveying into different conveying cases. Simulative throughput tests with numerical simulation software using the discrete element method, as well as experimental throughput tests, serve as a benchmark. Overall, the analytical modeling already shows a very good calculation accuracy. Nevertheless, there are some outliers that lead to larger deviations in the throughput. The model predominantly overestimates the throughputs, whereby the origin of these deviations is often in the conveying angle calculation. Therefore, a regression-based correction factor for calculating the conveying angle is developed and implemented.

Analytical and Calibration Models for Slot Antennas

2019 ◽  
pp. 57-100
Author(s):  
Kok Yeow You
Keyword(s):  
Numerical Simulation ◽  
Analytical Calculation ◽  
Computation Time ◽  
Systematic Errors ◽  
Simulation Software ◽  
Slot Antenna ◽  
Slot Antennas ◽  
Long Period ◽  
Calibration Models ◽  
Calibration Methods

In this chapter, the background, analytical formulations, and calibration routines for slot antennas are briefly reviewed. Performance and operating frequency of the slot antenna are strongly dependent on the dimension and shape of the slot or slotted array on the antenna. Nowadays, most antennas are designed using numerical simulation software for accuracy in analysis. However, analytical formulations still play an important role in the pre-design of the antenna due to the numerical simulation which still requires relatively long period of computation time compared to the analytical calculation. The predicted dimension of the antenna from analytical calculations will only require minor adjustment to optimize its performance in numerical simulation. Hence, the time spent for the antenna design can be shortened. Besides the performance of antenna, the antenna calibration process is crucial as well for releasing systematic errors in the antenna measurements. Some one-port calibration methods are described in detail.

STATISTICAL DESIGN OF EXPERIMENTS FOR THE Cr(VI) ADSORPTION ON WEED Salvinia cucullata

2013 ◽  
Vol 12 (3) ◽  
pp. 465-474 ◽  
Author(s):  
Saroj Sundar Baral ◽  
Ganesan Surendran ◽  
Namrata Das ◽  
Polisetty Venkateswara Rao
Keyword(s):  
Design Of Experiments ◽  
Statistical Design ◽  
Statistical Design Of Experiments

scholarly journals Synthesis of an Addition-Crosslinkable, Silicon-Modified Polyolefin via Reactive Extrusion Monitored by In-Line Raman Spectroscopy

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1246
Author(s):  
Steffen Ulitzsch ◽  
Tim Bäuerle ◽  
Mona Stefanakis ◽  
Marc Brecht ◽  
Thomas Chassé ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
High Performance ◽  
Process Analytical Technology ◽  
Statistical Design ◽  
Reactive Extrusion ◽  
Statistical Design Of Experiments ◽  
Grafting Efficiency ◽  
Grafting Reaction ◽  
Central Composite Experimental Design ◽  
Process Factors

We present the modification of ethylene-propylene rubber (EPM) with vinyltetra-methydisiloxane (VTMDS) via reactive extrusion to create a new silicone-based material with the potential for high-performance applications in the automotive, industrial and biomedical sectors. The radical-initiated modification is achieved with a peroxide catalyst starting the grafting reaction. The preparation process of the VTMDS-grafted EPM was systematically investigated using process analytical technology (in-line Raman spectroscopy) and the statistical design of experiments (DoE). By applying an orthogonal factorial array based on a face-centered central composite experimental design, the identification, quantification and mathematical modeling of the effects of the process factors on the grafting result were undertaken. Based on response surface models, process windows were defined that yield high grafting degrees and good grafting efficiency in terms of grafting agent utilization. To control the grafting process in terms of grafting degree and grafting efficiency, the chemical changes taking place during the modification procedure in the extruder were observed in real-time using a spectroscopic in-line Raman probe which was directly inserted into the extruder. Successful grafting of the EPM was validated in the final product by 1H-NMR and FTIR spectroscopy.

scholarly journals Evaluation of Cutting-Tool Coating on the Surface Roughness and Hole Dimensional Tolerances during Drilling of Al6061-T651 Alloy

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1783
Author(s):  
Hamza A. Al-Tameemi ◽  
Thamir Al-Dulaimi ◽  
Michael Oluwatobiloba Awe ◽  
Shubham Sharma ◽  
Danil Yurievich Pimenov ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Cutting Tool ◽  
Good Practice ◽  
Cutting Tools ◽  
Statistical Design ◽  
Cutting Parameters ◽  
Statistical Design Of Experiments ◽  
Hole Quality ◽  
Coated Tools ◽  
Tool Coating

Aluminum alloys are soft and have low melting temperatures; therefore, machining them often results in cut material fusing to the cutting tool due to heat and friction, and thus lowering the hole quality. A good practice is to use coated cutting tools to overcome such issues and maintain good hole quality. Therefore, the current study investigates the effect of cutting parameters (spindle speed and feed rate) and three types of cutting-tool coating (TiN/TiAlN, TiAlN, and TiN) on the surface finish, form, and dimensional tolerances of holes drilled in Al6061-T651 alloy. The study employed statistical design of experiments and ANOVA (analysis of variance) to evaluate the contribution of each of the input parameters on the measured hole-quality outputs (surface-roughness metrics Ra and Rz, hole size, circularity, perpendicularity, and cylindricity). The highest surface roughness occurred when using TiN-coated tools. All holes in this study were oversized regardless of the tool coating or cutting parameters used. TiN tools, which have a lower coating hardness, gave lower hole circularity at the entry and higher cylindricity, while TiN/TiAlN and TiAlN seemed to be more effective in reducing hole particularity when drilling at higher spindle speeds. Finally, optical microscopes revealed that a built-up edge and adhesions were most likely to form on TiN-coated tools due to TiN’s chemical affinity and low oxidation temperature compared to the TiN/TiAlN and TiAlN coatings.

Study of surface modification of recycled ultrafiltration membranes using statistical design of experiments

2021 ◽  
Vol 23 ◽  
pp. 100978
Author(s):  
L. Rodríguez-Sáez ◽  
J. Landaburu-Aguirre ◽  
S. Molina ◽  
M.C. García-Payo ◽  
E. García-Calvo
Keyword(s):  
Surface Modification ◽  
Design Of Experiments ◽  
Statistical Design ◽  
Statistical Design Of Experiments ◽  
Ultrafiltration Membranes

Computational and Experimental Study of Enhanced Laminar Flow Heat Transfer in Three-Dimensional Sinusoidal Wavy-Plate-Fin Channels

2003 ◽  
Author(s):  
Jiehai Zhang ◽  
Arun Muley ◽  
Joseph B. Borghese ◽  
Raj M. Manglik
Keyword(s):  
Heat Transfer ◽  
Flow Behavior ◽  
Computational Simulation ◽  
Three Dimensional ◽  
Heat Fluxes ◽  
Staggered Grid ◽  
Uniform Heat Flux ◽  
Complex Flow ◽  
Constant Property ◽  
Fin Efficiency

Enhanced heat transfer characteristics of low Reynolds number airflows in three-dimensional sinusoidal wavy plate-fin channels are investigated. For the computational simulation, steady state, constant property, periodically developed, laminar forced convection is considered with the channel surface at the uniform heat flux condition; the wavy-fin is modeled by its two asymptotic limits of 100% and zero fin efficiency. The governing equations are solved numerically using finite-volume techniques for a non-orthogonal, non-staggered grid. Computational results for velocity and temperature distribution, isothermal Fanning friction factor f and Colburn factor j are presented for airflow rates in the range of 10 ≤ Re ≤ 1500. The numerical results are further compared with experimental data, with excellent agreement, for two different wavy-fin geometries. The influence of fin density on the flow behavior and the enhanced convection heat transfer are highlighted. Depending on the flow rate, a complex flow structure is observed, which is characterized by the generation, spatial growth and dissipation of vortices in the trough region of the wavy channel. The thermal boundary layers on the fin surface are periodically disrupted, resulting in high local heat fluxes. The overall heat transfer performance is improved considerably, compared to the straight channel with the same cross-section, with a relatively smaller increase in the associated pressure drop penalty.

Sign in / Sign up

Export Citation Format

Share Document