scholarly journals Correction: Wang, Y.; et al. Magnesium Alloy Matching Layer for High-Performance Transducer Applications. Sensors 2018, 18, 4424

Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3888
Author(s):  
Wang ◽  
Tao ◽  
Guo ◽  
Li ◽  
Huang ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
High Performance ◽  
Matching Layer

The authors wish to make the following corrections to this paper [1]: [...]

scholarly journals Magnesium Alloy Matching Layer for High-Performance Transducer Applications

Sensors ◽  
2018 ◽  
Vol 18 (12) ◽  
pp. 4424 ◽  
Author(s):  
Yulei Wang ◽  
Jingya Tao ◽  
Feifei Guo ◽  
Shiyang Li ◽  
Xingyi Huang ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
Insertion Loss ◽  
Acoustic Impedance ◽  
High Performance ◽  
Ultrasonic Transducers ◽  
Impedance Match ◽  
Water Medium ◽  
Promising Alternative ◽  
Matching Layer ◽  
Magnesium Alloy Az31b

In this paper, we report the use of magnesium alloy (AZ31B) as the matching material for PZT-5H ultrasonic transducers. The AZ31B has an acoustic impedance of 10.3 MRayl, which provides a good acoustic impedance match for PZT-5H ultrasonic transducers in water medium based on the double matching layer theory. Two PZT-5H transducers with different center frequencies were designed and fabricated using the AZ31B. The respective center frequencies of the two fabricated transducers were 4.6 MHz and 9.25 MHz. The 4.6 MHz transducer exhibits a −6 dB bandwidth of 79% and two-way insertion loss of −11.11 dB. The 9.25 MHz transducer also shows good performance: −6 dB bandwidth of 71% and two-way insertion loss of −14.43 dB. The properties of the two transducers are superior to those of transducers using a composite matching layer, indicating that the magnesium alloy may be a promising alternative for high-performance transducers.

Magnesium Alloy Matching Layer for PMN-PT Single Crystal Transducer Applications

2018 ◽  
Vol 65 (10) ◽  
pp. 1865-1872 ◽  
Author(s):  
Feifei Guo ◽  
Yulei Wang ◽  
Zhongyuan Huang ◽  
Weibao Qiu ◽  
Zhiqiang Zhang ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
Single Crystal ◽  
Matching Layer

Double-Layered Cement Composites with Superior Electromagnetic Wave Absorbing Properties Containing Carbon Black and Expanded Polystyrene

2013 ◽  
Vol 774-776 ◽  
pp. 747-752 ◽  
Author(s):  
Yue Fang Zhang ◽  
Wan Jun Hao ◽  
Bao Yi Li ◽  
Yu Ping Duan ◽  
Shun Hua Liu
Keyword(s):  
Electromagnetic Wave ◽  
Carbon Black ◽  
High Performance ◽  
Expanded Polystyrene ◽  
Cement Composites ◽  
Frequency Range ◽  
Electromagnetic Wave Absorption ◽  
Matching Layer ◽  
Layer Composite ◽  
New Material

This paper reported that, using the method of double layer composite successfully prepared high performance of electromagnetic wave absorption materials. Such a composite is composed of a cement matching layer filled with expanded polystyrene (EPS) beads and an absorbing cement layer made of EPS beads and carbon black. The samples were tested by arching method in the frequency range of 8~18GHz. The reflectivities were revealed to be excellent, the lowest being-17dB. The new material can be used for building indoor electromagnetic radiation protection.

4041 Characteristics of high-performance magnesium alloy materials in compressive deformation

2006 ◽  
Vol 2006.1 (0) ◽  
pp. 983-984
Author(s):  
Liqun RUAN ◽  
Yoshihito KAWAMURA ◽  
Keisuke YAMAGUCHI ◽  
Yasuo MARUMO ◽  
Tatsuhiro MUKOUDA
Keyword(s):  
Magnesium Alloy ◽  
High Performance ◽  
Compressive Deformation

Investigation of High Performance Diamond Brazed Saw for Cutting AZ31 Magnesium Alloy

2011 ◽  
Vol 487 ◽  
pp. 347-351
Author(s):  
Bo Jiang Ma ◽  
X. Cai ◽  
L.A. Li
Keyword(s):  
Magnesium Alloy ◽  
High Performance ◽  
Az31 Magnesium Alloy ◽  
X Ray Diffraction ◽  
Nicr Alloy ◽  
Alloy Plate ◽  
Energy Dispersion Spectrometer ◽  
Long Time ◽  
Diamond Saw ◽  
High Frequency Induction

The high performance diamond brazed saw was developed to cut efficiently AZ31 Magnesium Alloy. The Ti-coated diamond and the uncoated diamond were brazed with NiCr alloy by high-frequency induction under argon atmosphere at 1040°C within 20 seconds. Scanning electron microscopy (SEM), energy dispersion spectrometer (EDS) and X-ray diffraction (XRD) were used to investigate the interfacial microstructures between brazed diamond and the filler alloy. The results show that Cr-carbides forms normally and compactly on the surface of Ti-coated diamond brazed, whereas Cr-carbide forms tangentially and loosely on the surface of uncoated diamond brazed. That is because Ti has changed the mechanism of Cr-carbides formed on the surface of diamond brazed. The test of cutting AZ31 magnesium alloy plate shows that the section cut by Ti-coated diamond saw is much smoother than that cut by uncoated diamond saw after a long time.

scholarly journals High performance corrosion and wear resistant composite titanium nitride layers produced on the AZ91D magnesium alloy by a hybrid method

2014 ◽  
Vol 2 (3) ◽  
pp. 265-273 ◽  
Author(s):  
Michał Tacikowski ◽  
Marek Betiuk ◽  
Konrad Cymerman ◽  
Marcin Pisarek ◽  
Irena Pokorska ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
Titanium Nitride ◽  
Hybrid Method ◽  
High Performance ◽  
Corrosion And Wear ◽  
Wear Resistant ◽  
Az91d Magnesium Alloy ◽  
Nitride Layers
Sign in / Sign up

Export Citation Format

Share Document