scholarly journals Pressure Sensor Placement for Leak Localization in Water Distribution Networks Using Information Theory

Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 443
Author(s):  
Ildeberto Santos-Ruiz ◽  
Francisco-Ronay López-Estrada ◽  
Vicenç Puig ◽  
Guillermo Valencia-Palomo ◽  
Héctor-Ricardo Hernández

This paper presents a method for optimal pressure sensor placement in water distribution networks using information theory. The criterion for selecting the network nodes where to place the pressure sensors was that they provide the most useful information for locating leaks in the network. Considering that the node pressures measured by the sensors can be correlated (mutual information), a subset of sensor nodes in the network was chosen. The relevance of information was maximized, and information redundancy was minimized simultaneously. The selection of the nodes where to place the sensors was performed on datasets of pressure changes caused by multiple leak scenarios, which were synthetically generated by simulation using the EPANET software application. In order to select the optimal subset of nodes, the candidate nodes were ranked using a heuristic algorithm with quadratic computational cost, which made it time-efficient compared to other sensor placement algorithms. The sensor placement algorithm was implemented in MATLAB and tested on the Hanoi network. It was verified by exhaustive analysis that the selected nodes were the best combination to place the sensors and detect leaks.

2020 ◽  
Vol 516 ◽  
pp. 56-71 ◽  
Author(s):  
Mohammad Sadegh Khorshidi ◽  
Mohammad Reza Nikoo ◽  
Narges Taravatrooy ◽  
Mojtaba Sadegh ◽  
Malik Al-Wardy ◽  
...  

Water ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 1999
Author(s):  
Malvin S. Marlim ◽  
Doosun Kang

Contamination in water distribution networks (WDNs) can occur at any time and location. One protection measure in WDNs is the placement of water quality sensors (WQSs) to detect contamination and provide information for locating the potential contamination source. The placement of WQSs in WDNs must be optimally planned. Therefore, a robust sensor-placement strategy (SPS) is vital. The SPS should have clear objectives regarding what needs to be achieved by the sensor configuration. Here, the objectives of the SPS were set to cover the contamination event stages of detection, consumption, and source localization. As contamination events occur in any form of intrusion, at any location and time, the objectives had to be tested against many possible scenarios, and they needed to reach a fair value considering all scenarios. In this study, the particle swarm optimization (PSO) algorithm was selected as the optimizer. The SPS was further reinforced using a databasing method to improve its computational efficiency. The performance of the proposed method was examined by comparing it with a benchmark SPS example and applying it to DMA-sized, real WDNs. The proposed optimization approach improved the overall fitness of the configuration by 23.1% and showed a stable placement behavior with the increase in sensors.


2018 ◽  
Vol 108 ◽  
pp. 152-162 ◽  
Author(s):  
Adrià Soldevila ◽  
Joaquim Blesa ◽  
Sebastian Tornil-Sin ◽  
Rosa M. Fernandez-Canti ◽  
Vicenç Puig

2017 ◽  
Vol 20 (6) ◽  
pp. 1286-1295 ◽  
Author(s):  
Xiang Xie ◽  
Quan Zhou ◽  
Dibo Hou ◽  
Hongjian Zhang

Abstract The performance of model-based leak detection and localization techniques heavily depends on the configuration of a limited number of sensors. This paper presents a sensor placement optimization strategy that guarantees sufficient diagnosability while satisfying the budget constraint. Based on the theory of compressed sensing, the leak localization problem could be transformed into acquiring the sparse leak-induced demands from the available measurements, and the average mutual coherence is devised as a diagnosability criterion for evaluating whether the measurements contain enough information for identifying the potential leaks. The optimal sensor placement problem is then reformulated as a {0, 1} quadratic knapsack problem, seeking an optimal sensor placement scheme by minimizing the average mutual coherence to maximize the degree of diagnosability. To effectively handle the complicated real-life water distribution networks, a validated binary version of artificial bee colony algorithm enhanced by genetic operators, including crossover and swap, is introduced to solve the binary knapsack problem. The proposed strategy is illustrated and validated through a real-life water distribution network with synthetically generated field data.


Sign in / Sign up

Export Citation Format

Share Document