scholarly journals A New Approach for Design Optimization and Parametric Analysis of Symmetric Compound Parabolic Concentrator for Photovoltaic Applications

2021 ◽  
Vol 13 (9) ◽  
pp. 4606
Author(s):  
Faisal Masood ◽  
Perumal Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Javed Akhter ◽  
Mohammad Azad Alam
Keyword(s):  
Parametric Analysis ◽  
Concentration Ratio ◽  
Synergistic Effects ◽  
Geometric Optimization ◽  
Design Parameters ◽  
Imaging Device ◽  
Compound Parabolic Concentrator ◽  
Photovoltaic Applications ◽  
Half Angle ◽  
The Impact

A compound parabolic concentrator (CPC) is a non-imaging device generally used in PV, thermal, or PV/thermal hybrid systems for the concentration of solar radiation on the target surface. This paper presents the geometric design, statistical modeling, parametric analysis, and geometric optimization of a two-dimensional low concentration symmetric compound parabolic concentrator for potential use in building-integrated and rooftop photovoltaic applications. The CPC was initially designed for a concentration ratio of “2×” and an acceptance half-angle of 30°. A MATLAB code was developed in house to provoke the CPC reflector’s profile. The height, aperture width, and concentration ratios were computed for different acceptance half-angles and receiver widths. The interdependence of optical concentration ratio and acceptance half-angle was demonstrated for a wide span of acceptance half-angles. The impact of the truncation ratio on the geometric parameters was investigated to identify the optimum truncation position. The profile of truncated CPC for different truncation positions was compared with full CPC. A detailed statistical analysis was performed to analyze the synergistic effects of independent design parameters on the responses using the response surface modeling approach. A set of optimized design parameters was obtained by establishing specified optimization criteria. A 50% truncated CPC with an acceptance half-angle of 21.58° and receiver width of 193.98 mm resulted in optimum geometric dimensions.

scholarly journals Multiparameter Analysis for Efficiency Improvement of Single-Phase Capacitor Motor

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Vasilija Sarac ◽  
Tatjana Atanasova-Pacemska
Keyword(s):  
Parametric Analysis ◽  
Single Phase ◽  
Electricity Consumption ◽  
Design Parameters ◽  
Magnetic Flux Density ◽  
Operating Characteristics ◽  
Widespread Application ◽  
Electrical Motors ◽  
Multiparameter Analysis ◽  
The Impact

Single-phase motors are known for their small power ratings and their usage in various household appliances. Although they are not large electricity consumers, their widespread application contributes to the overall electricity consumption. In addition, standard IEC 60034-30-1:214 defines the efficiency levels for single- and three-phase motors and stipulates the increased electrical efficiency for the electrical motors. Therefore, this paper sets the parametric analysis of permanently split capacitor motor with five different design parameters that have impact on the efficiency of the motor. As an output from the parametric analysis, two different optimized motor models are obtained with increased efficiency. The impact of each parameter on motor efficiency—as well as on the other operating characteristics, like starting torque, overloading capacity, rated current, starting current, total losses, and power factor—is analyzed and adequate conclusions are derived. The obtained motor models are verified with Finite Element Method (FEM) for magnetic flux density distribution.

A Novel Lens-Walled Compound Parabolic Concentrator for Photovoltaic Applications

2012 ◽  
Vol 134 (2) ◽  
Author(s):  
Yuehong Su ◽  
Gang Pei ◽  
Saffa B. Riffat ◽  
Hulin Huang
Keyword(s):  
Concentration Ratio ◽  
Incidence Angle ◽  
Small Degree ◽  
Photovoltaic System ◽  
Acceptance Angle ◽  
Optical Efficiency ◽  
Concentrate Solar Radiation ◽  
Compound Parabolic Concentrator ◽  
Photovoltaic Applications ◽  
The Common

A compound parabolic concentrator (CPC) is a nonimaging concentrator that can concentrate solar radiation coming within its acceptance angle. A low concentration CPC photovoltaic system has the advantages of reduced Photovoltaics (PVs) cell size, increased efficiency and stationary operation. The acceptance angle of a CPC is associated with its geometrical concentration ratio, by which the size of PV cell could be reduced. Truncation is a way to increase the actual acceptance angle of a mirror CPC, but it also reduces the geometrical concentration ratio. On the other hand, a solid dielectric CPC can have a much larger acceptance angle, but it has a larger weight. To overcome these drawbacks, this study presents a novel lens-walled CPC that has a thin lens attached to the inside of a common mirror CPC or has the lens to be mirror coated on its outside surface. The shape of the lens is formed by rotating the parabolic curves of a CPC by a small degree internally around the top end points of the curves. The refraction of the lens allows the lens-walled CPC to concentrate light from wider incidence angle. The commercial optical analysis software PHOTOPIA is used to verify the principle of the presented lens-walled CPC and examine its optical performance against the common CPCs. As an example, the simulation is aimed to evaluate whether a lens-walled CPC with a geometrical concentration ratio of 4 has any advantage over a common CPC with a geometrical concentration ratio of 2.5 in terms of actual acceptance angle, optical efficiency and optical concentration ratio.

A New Design of a (3D) Fresnel Collector With Fixed Mirrors and Tracking Absorber

2000 ◽  
Vol 122 (2) ◽  
pp. 63-68 ◽  
Author(s):  
A. B. Larbi
Keyword(s):  
Concentration Ratio ◽  
Focal Length ◽  
Computer Code ◽  
Design Parameters ◽  
Medium Temperature ◽  
Maintenance Costs ◽  
Energy Delivery ◽  
Half Angle ◽  
Optical Behavior ◽  
Fixed Mirrors

In this paper we developed model of a (3D) Fresnel collector with fixed mirrors and tracking absorber which approximates the optical behavior of a fixed spherical collector (hemispherical bowl). The aim of the study is to investigate the possibility of using this type of installation for applications in medium temperature processes (200—300°C). Via a computer simulation which includes ray-tracing, we evaluate the sensitivity of the geometric concentration ratio to: concentrator design parameters and the option of using curved versus flat elementary mirrors. The developed computer code permits the optimization of the concentrator reflecting area, the focal length (or rim half-angle), and the dimensions and number of reflecting elementary mirrors. The (3D) Fresnel collectors can be a practical alternative to spherical collectors (hemispherical bowl). Capital and maintenance costs can be significantly lower than for spherical collectors, but with reduced energy delivery. [S0199-6231(00)00302-6]

Design and Parametric Analysis of Compound Parabolic Concentrator for Photovoltaic Applications

2021 ◽  
Author(s):  
Faisal Masood ◽  
Perumal A-L Nallagownden ◽  
Irraivan Elamvazuthi ◽  
Javed Akhter ◽  
Mohammad Azad Alam ◽  
...  
Keyword(s):  
Parametric Analysis ◽  
Compound Parabolic Concentrator ◽  
Photovoltaic Applications

Design of a Robust Memristive Spiking Neuromorphic System with Unsupervised Learning in Hardware

2021 ◽  
Vol 17 (4) ◽  
pp. 1-26
Author(s):  
Md Musabbir Adnan ◽  
Sagarvarma Sayyaparaju ◽  
Samuel D. Brown ◽  
Mst Shamim Ara Shawkat ◽  
Catherine D. Schuman ◽  
...  
Keyword(s):  
Unsupervised Learning ◽  
Recognition Task ◽  
Single Layer ◽  
Process Variations ◽  
Spike Timing ◽  
System Level ◽  
Design Parameters ◽  
Digital Pulse ◽  
Neuromorphic System ◽  
The Impact

Spiking neural networks (SNN) offer a power efficient, biologically plausible learning paradigm by encoding information into spikes. The discovery of the memristor has accelerated the progress of spiking neuromorphic systems, as the intrinsic plasticity of the device makes it an ideal candidate to mimic a biological synapse. Despite providing a nanoscale form factor, non-volatility, and low-power operation, memristors suffer from device-level non-idealities, which impact system-level performance. To address these issues, this article presents a memristive crossbar-based neuromorphic system using unsupervised learning with twin-memristor synapses, fully digital pulse width modulated spike-timing-dependent plasticity, and homeostasis neurons. The implemented single-layer SNN was applied to a pattern-recognition task of classifying handwritten-digits. The performance of the system was analyzed by varying design parameters such as number of training epochs, neurons, and capacitors. Furthermore, the impact of memristor device non-idealities, such as device-switching mismatch, aging, failure, and process variations, were investigated and the resilience of the proposed system was demonstrated.

Making Up 3D Bodies

2021 ◽  
Vol 4 (2) ◽  
pp. 1-9
Author(s):  
Kiona Hagen Niehaus ◽  
Rebecca Fiebrink
Keyword(s):  
Software Tool ◽  
The Body ◽  
Design Parameters ◽  
Artistic Practice ◽  
Human Form ◽  
Modeling Systems ◽  
Exploratory Approach ◽  
Disability Status ◽  
High Level ◽  
The Impact

This paper describes the process of developing a software tool for digital artistic exploration of 3D human figures. Previously available software for modeling mesh-based 3D human figures restricts user output based on normative assumptions about the form that a body might take, particularly in terms of gender, race, and disability status, which are reinforced by ubiquitous use of range-limited sliders mapped to singular high-level design parameters. CreatorCustom, the software prototype created during this research, is designed to foreground an exploratory approach to modeling 3D human bodies, treating the digital body as a sculptural landscape rather than a presupposed form for rote technical representation. Building on prior research into serendipity in Human-Computer Interaction and 3D modeling systems for users at various levels of proficiency, among other areas, this research comprises two qualitative studies and investigation of the impact on the first author's artistic practice. Study 1 uses interviews and practice sessions to explore the practices of six queer artists working with the body and the language, materials, and actions they use in their practice; these then informed the design of the software tool. Study 2 investigates the usability, creativity support, and bodily implications of the software when used by thirteen artists in a workshop. These studies reveal the importance of exploration and unexpectedness in artistic practice, and a desire for experimental digital approaches to the human form.

scholarly journals Simulation Tests of a Cow Milking Machine—Analysis of Design Parameters

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1358
Author(s):  
Ewa Golisz ◽  
Adam Kupczyk ◽  
Maria Majkowska ◽  
Jędrzej Trajer
Keyword(s):  
Mathematical Model ◽  
Simplified Model ◽  
Design Parameters ◽  
Degree Polynomial ◽  
Fourth Degree ◽  
Local Loss ◽  
Linear Drag ◽  
Milking Machine ◽  
Machine Analysis ◽  
The Impact

The objective of this paper was to create a mathematical model of vacuum drops in a form that enables the testing of the impact of design parameters of a milking cluster on the values of vacuum drops in the claw. Simulation tests of the milking cluster were conducted, with the use of a simplified model of vacuum drops in the form of a fourth-degree polynomial. Sensitivity analysis and a simulation of a model with a simplified structure of vacuum drops in the claw were carried out. As a result, the impact of the milking machine’s design parameters on the milking process could be analysed. The results showed that a change in the local loss and linear drag coefficient in the long milk duct will have a lower impact on vacuum drops if a smaller flux of inlet air, a higher head of the air/liquid mix, and a higher diameter of the long milk tube are used.

scholarly journals Impact of Cross-Tie Properties on the Modal Behavior of Cable Networks on Cable-Stayed Bridges

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Javaid Ahmad ◽  
Shaohong Cheng ◽  
Faouzi Ghrib
Keyword(s):  
Analytical Model ◽  
Design Parameters ◽  
Reference Base ◽  
Cable Network ◽  
Cable Networks ◽  
Modal Behavior ◽  
Stiffness And Damping ◽  
Main Cables ◽  
The Impact ◽  
Selection Of

Dynamic behaviour of cable networks is highly dependent on the installation location, stiffness, and damping of cross-ties. Thus, these are the important design parameters for a cable network. While the effects of the former two on the network response have been investigated to some extent in the past, the impact of cross-tie damping has rarely been addressed. To comprehend our knowledge of mechanics associated with cable networks, in the current study, an analytical model of a cable network will be proposed by taking into account both cross-tie stiffness and damping. In addition, the damping property of main cables in the network will also be considered in the formulation. This would allow exploring not only the effectiveness of a cross-tie design on enhancing the in-plane stiffness of a constituted cable network, but also its energy dissipation capacity. The proposed analytical model will be applied to networks with different configurations. The influence of cross-tie stiffness and damping on the modal response of various types of networks will be investigated by using the corresponding undamped rigid cross-tie network as a reference base. Results will provide valuable information on the selection of cross-tie properties to achieve more effective cable vibration control.

Sign in / Sign up

Export Citation Format

Share Document