scholarly journals Exploring the Potential in LID Technologies for Remediating Heavy Metals in Carwash Wastewater

2021 ◽  
Vol 13 (16) ◽  
pp. 8727
Author(s):  
Fatemeh Talebzadeh ◽  
Caterina Valeo ◽  
Rishi Gupta ◽  
C. Peter Constabel
Keyword(s):  
Heavy Metals ◽  
Rural Communities ◽  
Metal Removal ◽  
Low Impact Development ◽  
Heavy Metal Removal ◽  
Urban Environments ◽  
Treatment Processes ◽  
Wide Range ◽  
Removal Processes ◽  
High Concentrations

Carwash wastewater (CWW) can be a significant source of environmental pollution due to the diversity and high concentrations of contaminants it contains. This toxic wastewater can contain several different heavy metals that if left untreated, can enter surface and sub-surface waters. Innovative, nature-based solutions such as low-impact development (LID) technologies may provide an eco-friendly CWW treatment process that is both effective and affordable. This research reviews the available literature to provide definitive values of flowrate and contaminant concentrations found in CWW around the globe. Dividing LID technologies into two groups, vegetated and unvegetated systems, the authors explored the literature for the general performance of these technologies to sustainably treat heavy metals in CWW. Depending on the car wash’s size and intended purpose, whether cleaning vehicles in agriculture-based rural communities, mining, or in high-density urban environments, volumetric flowrates requiring treatment found in six different countries ranged from 35–400 L/car. CWW also contains a wide range of contaminants at various levels, including COD, turbidity, TDS and TSS, surfactants, oils and greases, and heavy metals such as lead, cadmium, zinc, copper, chromium, and iron. Heavy metal removal by both vegetated and unvegetated LIDs shows mixed results in the literature, but given the different processes involved in both types, the authors propose a system that combines these types in order to provide all the necessary removal processes, including mechanical filtration, adsorption, sedimentation, chemical and biological treatment processes.

Understanding the factors influencing the removal of heavy metals in urban stormwater runoff

2016 ◽  
Vol 73 (12) ◽  
pp. 2921-2928 ◽  
Author(s):  
Marla C. Maniquiz-Redillas ◽  
Lee-Hyung Kim
Keyword(s):  
Heavy Metals ◽  
Fine Particles ◽  
Metal Removal ◽  
Low Impact Development ◽  
Heavy Metal Removal ◽  
Stormwater Runoff ◽  
Winter Season ◽  
Filter Media ◽  
Factors Influencing ◽  
Removal Of Heavy Metals

Abstract In this research, an infiltration trench equipped with an extensive pretreatment and filter bed consisting of woodchip, sand and gravel was utilized as a low impact development technique to manage stormwater runoff from a highly impervious road with particular emphasis on heavy metal removal. Findings revealed that the major factors influencing the removal of heavy metals were the concentration of the particulate matters and heavy metals in runoff, runoff volume and flow rates. The reduction of heavy metals was enhanced by sedimentation of particulates through pretreatment. Fine particles (<2 mm) had the most significant amount of heavy metals, thus, enhanced adsorption and filtration using various filter media were important design considerations. Sediment was most highly attached on the surface area of woodchip than to other filter media like sand, gravel and geotextile. It is suggested that maintenance must be performed after the end of the winter season wherein high sediment rate was observed to maintain the efficiency of the treatment system.

scholarly journals CRUSTACEAN WASTE SHELLS AS ADSORPTION MATERIALS FOR HEAVY METALS IN AN AQUEOUS SOLUTION

2020 ◽  
Vol 4 (2) ◽  
pp. 33-25
Author(s):  
Queency P. Padida ◽  
Rolando V. Maningas ◽  
Christian Paul P. dela Cruz ◽  
Lustina P. Lapie ◽  
Nilda S. Alforja
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
High Capacity ◽  
Adsorption Rate ◽  
Agriculture Industry ◽  
Laguna De Bay ◽  
High Concentrations

Laguna de Bay is one of the country’s major lakes, providing a third of the fish consumed by Metro Manila’s 16 million residents. It also provides support for agriculture, industry, and hydropower generation, as well as providing a welcome respite for many Filipinos. However, because of the lake’s importance, it is threatened by a variety of issues, including pollution. Heavy metals such as mercury and lead are present in high concentrations in the lake. And these heavy metals may persist in fish, water, air and the human body. As a result, an adsorption technique for heavy metal removal in an aqueous solution was investigated. As an adsorbent, the produced chitosan from crustacean waste shells was employed. The study’s parameters were contact time, adsorbent quantity, and pH. Results showed that 0.5 g of chitosan has a higher absorption rate of 99% in 500 mg/L solutions compared to 1.0 g of chitosan with an adsorption rate of 98%. In terms of contact time, 60 minutes showed almost 100% adsorption rate while 120 minutes was 98%. With increasing pH, the amount of metal adsorption rises. This developed chitosan from crustacean waste shells indicates high capacity as adsorbent materials for heavy metals. As a result, it appears to be a viable material for water treatment.

Low Cost Absorbents, Techniques, and Heavy Metal Removal Efficiency

2018 ◽  
pp. 50-79
Author(s):  
Harendra Kumar Sharma ◽  
Irfan Rashid Sofi ◽  
Khursheed Ahmad Wani
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Contamination ◽  
Metal Removal ◽  
Low Cost ◽  
Heavy Metal Removal ◽  
Future Research ◽  
Removal Of Heavy Metals ◽  
Living Species ◽  
High Concentrations

Heavy metal contamination in water is a serious concern to the environment and human health. High concentrations of heavy metals in the environment can be toxic to a variety of living species. Natural bio-absorbents are abundant and inexpensive and considered a waste if not managed properly. The role of bio-absorbents has been widely studied and has been utilized for the removal of heavy metals. The objective of the chapter is to search the database for different absorbents and their efficiency for the removal of heavy metals. Key words related to the study have been used to select different papers published by the researchers all over the world. A rigorous three-tier process has been utilized by the authors to select the papers from the database for the current study. This chapter has identified a few research gaps in the field of heavy metal removal by using different low cast absorbents that need to be taken into account in future research.

Colour and Heavy Metal Removal From Dyebath Effluents by Lime Precipitation

1975 ◽  
Vol 10 (1) ◽  
pp. 151-163
Author(s):  
A. Netzer ◽  
S. Beszedits
Keyword(s):  
Heavy Metals ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Colour Intensity ◽  
Textile Mills ◽  
Novel Approach ◽  
Dissolved Organics ◽  
High Concentrations ◽  
Degree Of Purification ◽  
Substantial Degree

Abstract Effluents from textile mills, carpet and hat dyeing operations create some of the worst industrial pollution. Not only are these discharges characterized by the presence of obnoxious and persistent colours, but they also contain high concentrations of dissolved organics and considerable amounts of such heavy metals as Zn, Cr, Hg, Pb, Cu and Co. An effective and economical reduction in the colour intensity and heavy metals concentration of these wastes can often be achieved with lime precipitation. Ten different dyebath effluents from various dyeing operations were treated with both massive lime dosages as well as controlled lime dosages to study the effect of pH upon decolourization and the removal of soluble organics and heavy metals. Colour intensity was evaluated by a novel approach proposed recently by the American Dye Manufacturers' Institute. The results indicate that all free heavy metals present in these wastewaters can be removed virtually 100% by lime precipitation. In some cases, excellent colour and good TOC removals were attained as well. Therefore, very often, but not always, treatment of dyebath effluents with lime can achieve a substantial degree of purification.

scholarly journals CRUSTACEAN WASTE SHELLS AS ADSORPTION MATERIALS FOR HEAVY METALS IN AN AQUEOUS SOLUTION

2020 ◽  
Vol 4 (2) ◽  
pp. 33-35
Author(s):  
Queency P. Padida ◽  
Rolando V. Maningas ◽  
Christian Paul P. dela Cruz ◽  
Lustina P. Lapie ◽  
Nilda S. Alforja
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
High Capacity ◽  
Adsorption Rate ◽  
Agriculture Industry ◽  
Laguna De Bay ◽  
High Concentrations

Laguna de Bay is one of the country's major lakes, providing a third of the fish consumed by Metro Manila's 16 million residents. It also provides support for agriculture, industry, and hydropower generation, as well as providing a welcome respite for many Filipinos. However, because of the lake's importance, it is threatened by a variety of issues, including pollution. Heavy metals such as mercury and lead are present in high concentrations in the lake. And these heavy metals may persist in fish, water, air and the human body. As a result, an adsorption technique for heavy metal removal in an aqueous solution was investigated. As an adsorbent, the produced chitosan from crustacean waste shells was employed. The study's parameters were contact time, adsorbent quantity, and pH. Results showed that 0.5 g of chitosan has a higher absorption rate of 99% in 500 mg/L solutions compared to 1.0 g of chitosan with an adsorption rate of 98%. In terms of contact time, 60 minutes showed almost 100% adsorption rate while 120 minutes was 98%. With increasing pH, the amount of metal adsorption rises. This developed chitosan from crustacean waste shells indicates high capacity as adsorbent materials for heavy metals. As a result, it appears to be a viable material for water treatment.

scholarly journals Synthesis, characterization and heavy metal removal efficiency of nickel ferrite nanoparticles (NFN’s)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Waheed Ali Khoso ◽  
Noor Haleem ◽  
Muhammad Anwar Baig ◽  
Yousuf Jamal
Keyword(s):  
Heavy Metals ◽  
Nickel Ferrite ◽  
Contact Time ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Ferrite Nanoparticles ◽  
Batch Adsorption ◽  
Aqueous Environment ◽  
Human Beings ◽  
Nickel Ferrite Nanoparticles

AbstractThe heavy metals, such as Cr(VI), Pb(II) and Cd(II), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is important to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, magnetic Nickel-Ferrite Nanoparticles (NFNs) were synthesized by co-precipitation method and characterized using X-Ray Diffraction (XRD), Energy Dispersive Spectroscopy (EDS) and Field Emission Scanning Electronic Microscopy (FE-SEM) techniques in order to confirm the crystalline structure, composition and morphology of the NFN’s, these were then used as adsorbent for the removal of Cr(VI), Pb(II) and Cd(II) from wastewater. The adsorption parameters under study were pH, dose and contact time. The values for optimum removal through batch-adsorption were investigated at different parameters (pH 3–7, dose: 10, 20, 30, 40 and 50 mg and contact time: 30, 60, 90, and 120 min). Removal efficiencies of Cr(VI), Pb(II) and Cd(II) were obtained 89%, 79% and 87% respectively under optimal conditions. It was found that the kinetics followed the pseudo second order model for the removal of heavy metals using Nickel ferrite nanoparticles.

Application of Immobilized Fungi Phanerochaete chrysosporium in Removal of Heavy-Metals from Wastewater

2013 ◽  
Vol 779-780 ◽  
pp. 1674-1677 ◽  
Author(s):  
Dan Lian Huang ◽  
Guang Ming Zeng ◽  
Piao Xu ◽  
Cui Lai ◽  
Mei Hua Zhao ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Iron Oxide ◽  
Magnetic Nanoparticles ◽  
Phanerochaete Chrysosporium ◽  
High Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Removal Of Heavy Metals ◽  
Iron Oxide Magnetic Nanoparticles ◽  
Ca Alginate

Immobilized microbe technologies are expected to be effectively used in wastewater treatment. Removal of heavy-metals from wastewater by immobilized Phanerochaete chrysosporium (Pc) with Ca-alginate and iron oxide magnetic nanoparticles (MNPs) was studied. The results showed that a biosorbent as Pc immobilized by Ca-alginate and iron oxide magnetic nanoparticles was successfully developed. And the iron oxide magnetic nanoparticles played an important role in the increase of biosorption capacity of Pc. Energy dispersive spectrometer (EDS) analysis confirmed that metal ions adsorbed to the surface of the biosorbents were partly transmitted to the interior of biosorbents, mainly embedded with iron oxide nanoparticles and Ca-alginate. Moreover, it was found that MNPs-Ca-alginate immobilized Pc showed a good affinity to various heavy metals, such as Pb(II), Zn(II), Cd(II) or Mg(II) and so on. The results proved the high efficiency of the biosorbents for heavy-metal removal and its potential application in the treatment of metal-containing wastewater.

A Review on Current Development of Animal Bone-Based Sorbent for Heavy Metals Removal from Contaminated Water and Wastewater

2021 ◽  
Vol 897 ◽  
pp. 109-115
Author(s):  
Sri Martini ◽  
Kiagus Ahmad Roni ◽  
Dian Kharismadewi ◽  
Erna Yuliwaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Inorganic Compounds ◽  
Heavy Metal Removal ◽  
Influential Factors ◽  
Contaminated Water ◽  
Animal Bone ◽  
Water And Wastewater ◽  
Cow Bone

This review article presents the usage of various animal bones such as chicken bone, fish bone, pig bone, camel bone, and cow bone as reliable biosorbent materials to remove heavy metals contained in contaminated water and wastewater. The sources and toxicity effects of heavy metal ions are also discussed properly. Then specific insights related to adsorption process and its influential factors along with the proven potentiality of selected biosorbents especially derived from animal bone are also explained. As the biosorbents are rich in particular organic and inorganic compounds and functional groups in nature, they play an important role in heavy metal removal from contaminated solutions. Overall, after conducting study reports on the literature, a brief conclusion can be drawn that animal bone waste has satisfactory efficacy as effective, efficient, and environmentally friendly sorbent material.

scholarly journals Chemical composition of leaves of a mangrove tree (Sonneratia apetala Buch.-Ham.) and their correlation with some soil variables

1970 ◽  
Vol 39 (1) ◽  
pp. 61-69 ◽  
Author(s):  
Ashafaque Ahmed ◽  
Mikael Ohlson ◽  
Sirajul Hoque ◽  
Md Golam Moula
Keyword(s):  
Heavy Metals ◽  
Chemical Composition ◽  
Coastal Zone ◽  
Organic Matter Content ◽  
Matter Content ◽  
Sonneratia Apetala ◽  
Mangrove Tree ◽  
Soil Variables ◽  
Wide Range ◽  
High Concentrations

Chemical composition of leaves of Sonneratia apetala Buch.-Ham. collected from three islands (chars) representing three hydrological regimes in a segment of the coastal zone of Bangladesh was studied. Their relations to some soil chemical and physical variables have also been investigated. The results showed that concentrations of B, C, Fe, Ga, Li, Mg, Mn, N, Na, P, Zn and Sr in leaves of S. apetala grown in different islands differed significantly. It was also revealed that some heavy metals, viz. Mn, Fe, Al, Sr and Ti showed wide range of concentrations. The leaves from one of the locations in Motherbunia island were characterized by exceptional high concentrations of heavy metals such as Al, As, Cu, Fe, Li, Ni, Pb that may be due to local contamination. Leaves sampled in the most seaward locations of the same island had highest concentrations of Ba, Ca, Cu, Mn and Na. High Mn concentration was found in the leaves of S. apetala of Motherbunia island. Correlations among soil and plant samples were generally very weak and organic matter content of soil did not appear to play a significant role in the nutrient supply of S. apetala. Key words: Coastal zone; tidal inundation; elemental concentration; Sonneratia apetala DOI: 10.3329/bjb.v39i1.5528Bangladesh J. Bot. 39(1): 61-69, 2010 (June)

Sign in / Sign up

Export Citation Format

Share Document