scholarly journals The CirCo (Circular Coffee) Project: A Case Study on Valorization of Coffee Silverskin in the Context of Circular Economy in Italy

2021 ◽  
Vol 13 (16) ◽  
pp. 9069
Author(s):  
Emily Overturf ◽  
Simon Pezzutto ◽  
Martina Boschiero ◽  
Nicoletta Ravasio ◽  
Achille Monegato
Keyword(s):  
Life Cycle ◽  
Circular Economy ◽  
Raw Materials ◽  
National Level ◽  
Ghg Emissions ◽  
Paper Production ◽  
Coffee Silverskin ◽  
Virgin Pulp ◽  
The Impact

Coffee silverskin (CSS) is one of the main byproducts of coffee roasting and poses a potential risk to the environment if disposed of incorrectly. Each year in Italy, over 500,000 tonnes of green coffee are imported for roasting followed by consumption or export. This results in over 7500 tonnes of CSS produced each year which is typically disposed of as solid waste. Silverskin contains lignocellulose and can be used as a substitute for other raw materials to produce paper pulp. Both Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) were performed to compare the impact and cost of CSS paper production to conventional paper production using only virgin pulp. It was shown that the addition of CSS reduces the environmental impact of paper production by 10% and greenhouse gas (GHG) emissions by 13% compared to conventional production with no cost increase (0.01% reduction with addition of CSS) for the producer. The results of this case study show that the utilization of CSS for paper production at the national level in Italy represents a suitable example of circular economy (CE).

scholarly journals Is Prolonging the Lifetime of Passive Durable Products a Low-Hanging Fruit of a Circular Economy? A Multiple Case Study

2019 ◽  
Vol 11 (18) ◽  
pp. 4819 ◽  
Author(s):  
Mohamad Kaddoura ◽  
Marianna Lena Kambanou ◽  
Anne-Marie Tillman ◽  
Tomohiko Sakao
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Circular Economy ◽  
Labor Costs ◽  
Product Service ◽  
Durable Products ◽  
Multiple Case ◽  
The Impact ◽  
Product Service Systems

Extending the lifetime of passive products, i.e., products that do not consume materials or energy during the use phase, by implementing product-service systems (PSS) has a potential to reduce the environmental impact while being an attractive and straightforward measure for companies to implement. This research assesses the viability of introducing PSS for passive products, by documenting five real product cases of prolonging the lifetime through repair or refurbishment and by quantifying, through life cycle assessment (LCA) and life cycle costing (LCC), the change in environmental and economic outcome. The environmental impact (measured as global warming potential over the life cycle) was reduced for all cases because extraction and production dominated the impact. This reduction was 45–72% for most cases and mainly influenced by the number of reuses and the relative environmental burden of the components whose lifetime was prolonged. The costs for the company (measured as LCC from the manufacturer’s perspective) decreased too by 8–37%. The main reason that costs reduced less than the environmental impact is that some costs have no equivalent in LCA, e.g., administration and labor costs for services. The decreases in both LCA and LCC results, as well as the willingness of the companies to implement the changes, demonstrate that this measure can be financially attractive for companies to implement and effectively contribute to a circular economy.

scholarly journals Environmental Profiling of Green Educational Building Using Life Cycle Assessment

2021 ◽  
Vol 12 (1) ◽  
pp. 10
Author(s):  
Talha Bin Farooq ◽  
Muhammad Bilal Sajid
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Single Case ◽  
Ecological Impact ◽  
Case Method ◽  
Environment Friendly ◽  
The Impact ◽  
Material Input

Over the last twenty years, architects and designers have been working towards minimizing the impact that buildings have on the environment. In spite of the fact that many architects claim their buildings are environment-friendly, the claims cannot be justified unless a Life Cycle Analysis (LCA) is conducted. The two major parts of the theoretical basis of the proposed scheme are the concept of sustainability of the environment and methods of assessing the building’s environmental impacts. The objective of this report is to evaluate the possible ecological impact of an educational building through its life cycle, from extracting raw materials to the end of life. In order to accomplish the goal of the study, a single-case method of a life cycle assessment was used to determine which stage of the life cycle (manufacturing, construction, consumption, maintenance, and dismantling) made the most contribution to the overall impact. The main installation system (foundation, frame, wall, floor, roof) of a building will have an impact on the environment during its life cycle. A typical new educational building was used as a case study in Islamabad, along with an optimized LCA method based on energy consumption inventories, the material input and output, and the assessment of the environmental impact.

scholarly journals Assessing the Mitigation Potential of Environmental Impacts From Circular Economy Strategies on an Industrial Sector and Its Value Chain: A Case Study on the Steel Value Chain in Quebec

2021 ◽  
Vol 2 ◽  
Author(s):  
Flavien Binet ◽  
François Saunier ◽  
Manuele Margni
Keyword(s):  
Life Cycle ◽  
Environmental Impacts ◽  
Value Chain ◽  
Circular Economy ◽  
Steel Industry ◽  
Ghg Emissions ◽  
Industrial Sector ◽  
Mitigation Potential ◽  
Whole Life Cycle

This research project aims to evaluate the potential reduction of environmental impacts from circular economy strategies on an industrial sector at a regional scale with a case study on Greenhouse Gas (GHG) emissions in Quebec's steel industry and its value chain. To do so, an integrated model has been created based on the matrix approach, building on material flow analysis (MFA) tracking flows and stocks and on life cycle assessment (LCA) to compute direct (from the activity, e.g., combustion process) and indirect (from the supply chain, e.g., production of raw material inside or outside of region) emissions. This theoretical model is designed to be applied to any emissions or environmental impacts from a specific sector in a given region and enable to model the effects of circularity strategies to both flows and related environmental impacts. The overall mitigation potential of individual or combined circular economy strategies on a specific sector could thus be evaluated across its entire value chain. In the case study, a set of the most promising circular strategies applicable in the Quebec context were identified, and the GHG reduction potential within and outside the province is calculated and compared with actual emissions. Six circular strategies were analyzed acting at three different levers, namely, GHG/material (increase iron recycling rate, switch to hydrogen-based reduction production), material/product (reduce weight of vehicle, limit over-specification in building construction), and product/service (increase buildings and cars lifetime, increase car-sharing), and therefore impact rather direct or indirect emissions on different stages of the steel life cycle. Combining these six strategies into a consolidated scenario shows that a circular-driven economy allows to cut down GHG emissions of the cradle-to-gate steel industry value chain by −55%, i.e., 1.67 Mt CO2e. Taking into account use phase of steel, overall reductions are estimated at −6.03 Mt CO2e, i.e., −30% of the whole life cycle.

scholarly journals Digital Eco-Design and Life Cycle Assessment—Key Elements in a Circular Economy: A Case Study of a Conventional Desk

2021 ◽  
Vol 11 (21) ◽  
pp. 10439
Author(s):  
Eduardo Martínez-Cámara ◽  
Jacinto Santamaría ◽  
Félix Sanz-Adán ◽  
David Arancón
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Circular Economy ◽  
Raw Materials ◽  
Extraction Process ◽  
Environmental Criteria ◽  
Final Design ◽  
Useful Life ◽  
Alternative Scenarios

In recent times, there has been an indisputable need to move towards a more sustainable economy, known as a circular economy, which is basically aimed at reducing the consumption of newly extracted raw materials to manufacture products, and thus, reduces waste generation by recycling products beyond their useful life to ultimately close the economic flow of the product. For the economy generated by products to close the circle, it is essential to tackle the problem at the source, that is, the process to achieve the desired product should be conducted by designing the product with environmental criteria (eco-design) and analysing its life cycle from the extraction process to the point when it ends its useful life (LCA). This article presents an ECO + LCA methodology that provides designers with an easy way of visualising the effect of their design decisions on the final environmental impact of the product. This methodology was tested on a case study of a conventional desk, with four alternative scenarios presented and an assessment of their final impact with a cradle-to-grave perspective. The final design obtained reduces the environmental impact by more than 30% and reduces costs by more than 11%.

Modernisation of Higher Education – Willful Action or Wishful Thinking? The Case of Bulgaria

2020 ◽  
Vol 8 (3) ◽  
pp. 3-17
Author(s):  
Elena Blagoeva
Keyword(s):  
Higher Education ◽  
Economic Crisis ◽  
Negative Impact ◽  
National Level ◽  
Sustainable Growth ◽  
Research Approach ◽  
Case Study Methodology ◽  
The Impact ◽  
The Eu

The impact of the last global economic crisis (2008) on the European economy put a strain on higher education (HE), yet it also pushed the sector towards intensive reforms and improvements. This paper focuses on the “Strategy for the Development of Higher Education in the Republic of Bulgaria 2014-2020”. With a case study methodology, we explore the strategic endeavours of the Bulgarian government to comply with the European directions and to secure sustainable growth for the HE sector. Our research question is ‘How capable is the Bulgarian HE Strategy to overcome the economic and systemic restraints of Bulgarian higher education?’. Because the development of strategies for HE within the EU is highly contextual, a single qualitative case study was chosen as the research approach. HE institutions are not ivory towers, but subjects to a variety of external and internal forces. Within the EU, this is obviated by the fact that Universities obtain their funds from institutions such as governments, students and their families, donors, as well as EU-level programmes. Therefore, to explore how these pressures interact to affect strategic action on national level, the case method is well suited as it enabled us to study the phenomena thoroughly and deeply. The paper suggests the actions proposed within the Strategy have the potential to overcome the delay, the regional isolation and the negative impact of the economic crisis on the country. Nevertheless, the key elements on which the success or failure of this Strategy hinges are the control mechanisms and the approach to implementation. Shortcomings in these two aspects of strategic actions in HE seem to mark the difference between gaining long-term benefits and merely saving face in front of international institutions.

European experience in transition to circular economy

2020 ◽  
Vol 19 (4) ◽  
pp. 598-617 ◽  
Author(s):  
S.V. Ratner
Keyword(s):  
European Union ◽  
Circular Economy ◽  
Raw Materials ◽  
Action Plan ◽  
National Level ◽  
The European Union ◽  
Scientific Methods ◽  
European Experience ◽  
General Scientific ◽  
The Eu

Subject. The article considers the concept of circular economy, which has originated relatively recently in the academic literature, and is now increasingly recognized in many countries at the national level. In the European Union, the transition to circular economy is viewed as an opportunity to improve competitiveness of the European Union, protect businesses from resource shortages and fluctuating prices for raw materials and supplies, and a way to increase employment and innovation. Objectives. The aim of the study is to analyze the incentives developed by the European Commission for moving to circular economy, and to assess their effectiveness on the basis of statistical analysis. Methods. I employ general scientific methods of research. Results. The analysis of the EU Action Plan for the Circular Economy enabled to conclude that the results of the recent research in circular economy barriers, eco-innovation, technology and infrastructure were successfully integrated into the framework of this document. Understanding the root causes holding back the circular economy development and the balanced combination of economic and administrative incentives strengthened the Action Plan, and it contributed to the circular economy development in the EU. Conclusions. The measures to stimulate the development of the circular economy proposed in the European Action Plan can be viewed as a prototype for designing similar strategies in other countries, including Russia. Meanwhile, a more detailed analysis of barriers to the circular economy at the level of individual countries and regions is needed.

scholarly journals 2-Piece Cork Stoppers as Alternative for Valorization of Thin Cork Planks: Analysis by LCA Methodology

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 873
Author(s):  
Francisco Javier Flor-Montalvo ◽  
Agustín Sánchez-Toledo Ledesma ◽  
Eduardo Martínez Cámara ◽  
Emilio Jiménez-Macías ◽  
Jorge Luis García-Alcaraz ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Lca Methodology ◽  
Significant Difference ◽  
Different Dimensions ◽  
The Impact ◽  
Different Thickness ◽  
Cork Stoppers ◽  
Wine Bottle

Natural stoppers are a magnificent closure for the production of aging wines and unique wines, whose application is limited by the availability of raw materials and more specifically of cork sheets of different thickness and quality. The growing demand for quality wine bottle closures leads to the search for alternative stopper production. The two-piece stopper is an alternative since it uses non-usable plates in a conventional way for the production of quality caps. The present study has analyzed the impact of the manufacture of these two-piece stoppers using different methodologies and for different dimensions by developing an LCA (Life Cycle Assessment), concluding that the process phases of the plate, its boiling, and its stabilization, are the phases with the greatest impact. Likewise, it is detected that the impacts in all phases are relatively similar (for one kg of net cork produced), although the volumetric difference between these stoppers represents a significant difference in impacts for each unit produced.

scholarly journals Decomposition Analysis of the Evolution of the Local Energy System as a Tool to Assess the Effect of Local Actions: Methodology and Example of Malmö, Sweden

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 461
Author(s):  
Isabel Azevedo ◽  
Vítor Leal
Keyword(s):  
Local Level ◽  
Ghg Emissions ◽  
Decomposition Analysis ◽  
Specific Effect ◽  
Energy System ◽  
Local Energy ◽  
Total Change ◽  
The Impact ◽  
Change Mitigation

This paper proposes the use of decomposition analysis to assess the effect of local energy-related actions towards climate change mitigation, and thus improve policy evaluation and planning at the local level. The assessment of the impact of local actions has been a challenge, even from a strictly technical perspective. This happens because the total change observed is the result of multiple factors influencing local energy-related greenhouse gas (GHG) emissions, many of them not even influenced by local authorities. A methodology was developed, based on a recently developed decomposition model, that disaggregates the total observed changes in the local energy system into multiple causes/effects (including local socio-economic evolution, technology evolution, higher-level governance frame and local actions). The proposed methodology, including the quantification of the specific effect associated with local actions, is demonstrated with the case study of the municipality of Malmö (Sweden) in the timeframe between 1990 and 2015.

scholarly journals Sustainability of Extraction of Raw Material by a Combination of Mobile and Stationary Mining Machines and Optimization of Machine Life Cycle

2020 ◽  
Vol 12 (24) ◽  
pp. 10454
Author(s):  
Katarína Teplická ◽  
Martin Straka
Keyword(s):  
Life Cycle ◽  
Raw Materials ◽  
Simulation Method ◽  
Raw Material ◽  
Optimal Distribution ◽  
Transport Costs ◽  
Scientific Discussion ◽  
Mining Companies ◽  
Conveyor Belts ◽  
The Impact

This article summarizes the arguments within the scientific discussion on the issue of using mining machines and their life cycle. The main goal of the article is to investigate the impact of a combination of mobile and stationary mining machines and their optimal distribution in the mining process to increase the efficiency of mining and processing of raw materials. The following methods of research were focused on the use of technical indicators for the valuation efficiency of the mining process: a simulation method was used for the distribution of mining machines, comparison analysis was used for the real and past state of mining machines, and a decision tree was used as managerial instrument for optimal alternatives of mining machines. The research empirically confirms and theoretically proves that optimal distribution of mining machines and machine parks is very important for mining companies. The benefit of this research for the mining company was the new location of the machines and the combination of stationary production lines and mobile equipment. The optimal layout of the machines reduced the number of conveyor belts and improved the transfer of limestone processing to mobile devices, saving time, which was reflected in transport costs. The results can be useful for other mining companies seeking to create an optimal machine park.

Sign in / Sign up

Export Citation Format

Share Document