scholarly journals Development of Eco-Friendly Mortars Produced with Kaolin Processing Waste: Durability Behavior Viewpoint

2021 ◽  
Vol 13 (20) ◽  
pp. 11395
Author(s):  
Alisson Mendes Rodrigues ◽  
Fabiana Pereira da Costa ◽  
Suellen Lisboa Dias Beltrão ◽  
Jucielle Veras Fernandes ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Compressive Strength ◽  
Mass Fraction ◽  
Mechanical Resistance ◽  
Processing Waste ◽  
X Ray Diffraction ◽  
X Ray ◽  
Granulometric Analysis ◽  
Mass Proportion ◽  
Mineralogical Phases

This study presents the development of new eco-friendly mortar compositions containing kaolin residues (KR) and assesses their durability behavior. Firstly, the natural and calcinated kaolin residues (600 °C, 650 °C, 700 °C, 750 °C, and 800 °C) were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA), granulometric analysis, and surface area. The kaolin residue calcinated at 800 °C was chosen to be added to new compositions of mortar because it presented the best pozzolanic performance. The aging tests accomplished in internal (Ei) and external (Ee) environments were applied in mortars with a mass proportion of 1:2:6 (cement + KR: lime: sand), in which the KR, calcinated at 800 °C, replaced the cement in the mass fraction of 0%, 5%, 10%, 15%, 20%, and 30%. The Ei was performed for 30, 60, 90, 180, and 360 days, and the Ee for 90; 210; 360; and 512 days. After the aging tests were completed, the mortar compositions containing KR were evaluated to determine their mineralogical phases (XRD), compressive strength (CS), and thermal behavior (DTA and thermogravimetry). In summary, the KR addition to the mortar compositions decreases the mechanical resistance to compression; however, mortars with a substitution of 10% and 20% presented resistance values within the minimum limit of 2.4 MPa established by ASTM C 270.

Purification of Bentonite Clays from Cubati, PB, Brazil, for Diversified Applications

2014 ◽  
Vol 805 ◽  
pp. 486-491
Author(s):  
J.M.R. Figueirêdo ◽  
Juliana Melo Cartaxo ◽  
I.A. Silva ◽  
C.D. Silva ◽  
Gelmires Araújo Neves ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Analysis ◽  
Laser Diffraction ◽  
The State ◽  
X Ray Diffraction ◽  
X Ray ◽  
Granulometric Analysis ◽  
Bentonite Clays

The State of Paraíba, Brazil, retains about 88.5% of all Brazilian bentonite, and much of this production comes from deposits in the District of Boa Vista, PB. Nevertheless, the deposits are almost depleted. Recently, new deposits were found, which will increases the reserves of the State, in the regions of Cubati and Pedra Lavrada, PB. The objective of this work is to characterize and develop purified clays, through sieving and hydrocycloning techniques, from those recently discovered bentonites for several applications. The characterization of the sample was done through granulometric analysis by laser diffraction, X-ray diffraction, chemical analysis by X-ray fluorescence, and thermogravimetric and differential thermal analysis. The results show that the samples are typical of bentonite clays, and that the purification solely by hydrocyclone presents the best results.

X-ray Diffraction and Thermal Analysis of Bauxite Ore-Processing Waste (Red Mud) Exchanged with Arsenate and Phosphate

2011 ◽  
Vol 59 (2) ◽  
pp. 189-199 ◽  
Author(s):  
Paola Castaldi ◽  
Margherita Silvetti ◽  
Stefano Enzo ◽  
Salvatore Deiana
Keyword(s):  
Thermal Analysis ◽  
Red Mud ◽  
Processing Waste ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ore Processing ◽  
Bauxite Ore

scholarly journals Structural changes of Cr-beidellite treated up to 1350 °C in oxygen or nitrogen atmospheres

Cerâmica ◽  
2018 ◽  
Vol 64 (369) ◽  
pp. 64-68
Author(s):  
H. S. Santos ◽  
A. M. Cesio ◽  
M. Gauna ◽  
V. F. Justo ◽  
C. Volzone
Keyword(s):  
Thermal Analysis ◽  
High Temperature ◽  
Thermal Treatment ◽  
Structural Changes ◽  
Pillared Clay ◽  
Nitrogen Atmosphere ◽  
Thermal Treatments ◽  
X Ray Diffraction ◽  
X Ray ◽  
Mineralogical Phases

Abstract Beidellite clay mineral after intercalation of OH-Cr(III) species were thermally analyzed up to 1350 °C in oxygen and nitrogen atmospheres. OH-Cr-beidellite can be used as a pillared clay precursor for catalysis or as adsorbent applications. However, in this paper beidellite enriched in chromium were analyzed at different thermal treatments up to high temperature for evaluating structural changes for possible future ceramic applications. The structural changes were followed by thermal analysis and X-ray diffraction. The thermal treatment of OH-Cr-beidellite in oxygen and nitrogen atmospheres developed different mineralogical phases up to 1050 °C, but at higher temperatures, the same phases were developed in both atmosphere treatments. Eskolaite phase (Cr2O3) appeared in the sample after heating at 400 °C in oxygen atmosphere, whereas grimaldite (CrO-OH) in nitrogen atmosphere, maintaining the starting phases. At 1000 °C the raw clay minerals disappeared, as it is knew. At 1050 °C in nitrogen atmosphere, grimaldite was absent and eskolaite appeared. At 1350 °C in the samples calcined in both atmospheres, quartz, cristobalite and mullite as the main phases and in lower contents aluminum oxide and aluminum-chromium oxide [(Al,Cr)2O3] were present.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

scholarly journals Struvite Grown in Gel, Its Crystal Structure at 90 K and Thermoanalytical Study

Crystals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 89 ◽  
Author(s):  
Jolanta Prywer ◽  
Lesław Sieroń ◽  
Agnieszka Czylkowska
Keyword(s):  
Thermal Analysis ◽  
Sodium Metasilicate ◽  
X Ray Diffraction ◽  
Gel Growth ◽  
Growth Technique ◽  
Thermoanalytical Study ◽  
X Ray ◽  
Cell Parameters ◽  
Thermal Analysis Techniques ◽  
Derivative Thermogravimetry

In this article, we report the crystallization of struvite in sodium metasilicate gel by single diffusion gel growth technique. The obtained crystals have a very rich morphology displaying 18 faces. In this study, the habit and morphology of the obtained struvite crystals are analyzed. The crystals were examined and identified as pure struvite by single X-ray diffraction (XRD). The orthorhombic polar noncentrosymmetric space group Pmn21 was identified. The structure of the crystal was determined at a temperature of 90 K. Our research indicates a lack of polymorphism, resulting from the temperature lowering to 90 K, which has not been previously reported. The determined unit cell parameters are as follows a = 6.9650(2) Å, b = 6.1165(2) Å, c = 11.2056(3) Å. The structure of struvite is presented here with a residual factor R1 = 1.2% at 0.80 Å resolution. We also present thermoanalytical study of struvite using thermal analysis techniques such as thermogravimetry (TG), derivative thermogravimetry (DTG) and differential thermal analysis (DTA).

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

scholarly journals The Potential for Natural Stones from Northeastern Brazil to Be Used in Civil Construction

Minerals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 440
Author(s):  
Fabiana Pereira da Costa ◽  
Jucielle Veras Fernandes ◽  
Luiz Ronaldo Lisboa de Melo ◽  
Alisson Mendes Rodrigues ◽  
Romualdo Rodrigues Menezes ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Analysis ◽  
Differential Thermal Analysis ◽  
Chemical Resistance ◽  
Mechanical Analysis ◽  
Northeastern Brazil ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Agents ◽  
Natural Stones

Natural stones (limestones, granites, and marble) from mines located in northeastern Brazil were investigated to discover their potential for use in civil construction. The natural stones were characterized by chemical analysis, X-ray diffraction, differential thermal analysis, and optical microscopy. The physical-mechanical properties (apparent density, porosity, water absorption, compressive and flexural strength, impact, and abrasion) and chemical resistance properties were also evaluated. The results of the physical-mechanical analysis indicated that the natural stones investigated have the potential to be used in different environments (interior, exterior), taking into account factors such as people’s circulation and exposure to chemical agents.

scholarly journals X-ray diffraction analysis of kaolin M1 and M2 via the Williamson–Hall and Warren–Averbach methods

2021 ◽  
pp. 174751982098472
Author(s):  
Lalmi Khier ◽  
Lakel Abdelghani ◽  
Belahssen Okba ◽  
Djamel Maouche ◽  
Lakel Said
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Low Temperature ◽  
Diffraction Analysis ◽  
Mechanical Resistance ◽  
X Ray Diffraction ◽  
Integral Breadth ◽  
X Ray ◽  
Mullite Phase

Kaolin M1 and M2 studied by X-ray diffraction focus on the mullite phase, which is the main phase present in both products. The Williamson–Hall and Warren–Averbach methods for determining the crystallite size and microstrains of integral breadth β are calculated by the FullProf program. The integral breadth ( β) is a mixture resulting from the microstrains and size effect, so this should be taken into account during the calculation. The Williamson–Hall chart determines whether the sample is affected by grain size or microstrain. It appears very clearly that the principal phase of the various sintered kaolins, mullite, is free from internal microstrains. It is the case of the mixtures fritted at low temperature (1200 °C) during 1 h and also the case of the mixtures of the type chamotte cooks with 1350 °C during very long times (several weeks). This result is very significant as it gives an element of explanation to a very significant quality of mullite: its mechanical resistance during uses at high temperature remains.

On tungstates of divalent cations (III) – Pb5O2[WO6]

2020 ◽  
Vol 235 (8-9) ◽  
pp. 311-317
Author(s):  
Stephan G. Jantz ◽  
Florian Pielnhofer ◽  
Henning A. Höppe
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Quantum Chemical ◽  
Density Functional ◽  
Divalent Cations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
First Results ◽  
Electrostatic Calculations

Abstract${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ was discovered as a frequently observed side phase during our investigation on lead tungstates. Its crystal structure was solved by single-crystal X-ray diffraction ($P{2}_{1}/n$, $a=7.4379\left(2\right)$ Å, $b=12.1115\left(4\right)$ Å, $c=10.6171\left(3\right)$ Å, $\beta =90.6847\left(8\right)$°, $Z=4$, ${R}_{\text{int}}=0.038$, ${R}_{1}=0.020$, $\omega {R}_{2}=0.029$, 4188 data, 128 param.) and is isotypic with ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{Te}}_{6}\right]$. ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ comprises a layered structure built up by non-condensed [WO6]${}^{6-}$ octahedra and ${\left[{\text{O}}_{4}{\text{Pb}}_{10}\right]}^{12+}$ oligomers. The compound was characterised by spectroscopic measurements (Infrared (IR), Raman and Ultraviolet–visible (UV/Vis) spectra) as well as quantum chemical and electrostatic calculations (density functional theory (DFT), MAPLE) yielding a band gap of 2.9 eV fitting well with the optical one of 2.8 eV. An estimation of the refractive index based on the Gladstone-Dale relationship yielded $n\approx 2.31$. Furthermore first results of the thermal analysis are presented.

Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process

2012 ◽  
Vol 217-219 ◽  
pp. 733-736
Author(s):  
Xiu Mei Han ◽  
Shu Ai Hao ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi
Keyword(s):  
Thermal Analysis ◽  
Ir Spectra ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir

Zn2SiO4:Eu3+, Dy3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1000oC. In Zn2SiO4:Eu3+,Dy3+ phosphors, the Eu3+ and Dy3+ show their characteristic red(613nm, 5D0-7F2), blue (481nm, 4F9/2–6H15/2) and yellow (577nm, 4F9/2–6H13/2) emissions.

Sign in / Sign up

Export Citation Format

Share Document