scholarly journals Spatial-Temporal Flows-Adaptive Street Layout Control Using Reinforcement Learning

2021 ◽  
Vol 14 (1) ◽  
pp. 107
Author(s):  
Qiming Ye ◽  
Yuxiang Feng ◽  
Eduardo Candela ◽  
Jose Escribano Macias ◽  
Marc Stettler ◽  
...  

Complete streets scheme makes seminal contributions to securing the basic public right-of-way (ROW), improving road safety, and maintaining high traffic efficiency for all modes of commute. However, such a popular street design paradigm also faces endogenous pressures like the appeal to a more balanced ROW for non-vehicular users. In addition, the deployment of Autonomous Vehicle (AV) mobility is likely to challenge the conventional use of the street space as well as this scheme. Previous studies have invented automated control techniques for specific road management issues, such as traffic light control and lane management. Whereas models and algorithms that dynamically calibrate the ROW of road space corresponding to travel demands and place-making requirements still represent a research gap. This study proposes a novel optimal control method that decides the ROW of road space assigned to driveways and sidewalks in real-time. To solve this optimal control task, a reinforcement learning method is introduced that employs a microscopic traffic simulator, namely SUMO, as its environment. The model was trained for 150 episodes using a four-legged intersection and joint AVs-pedestrian travel demands of a day. Results evidenced the effectiveness of the model in both symmetric and asymmetric road settings. After being trained by 150 episodes, our proposed model significantly increased its comprehensive reward of both pedestrians and vehicular traffic efficiency and sidewalk ratio by 10.39%. Decisions on the balanced ROW are optimised as 90.16% of the edges decrease the driveways supply and raise sidewalk shares by approximately 9%. Moreover, during 18.22% of the tested time slots, a lane-width equivalent space is shifted from driveways to sidewalks, minimising the travel costs for both an AV fleet and pedestrians. Our study primarily contributes to the modelling architecture and algorithms concerning centralised and real-time ROW management. Prospective applications out of this method are likely to facilitate AV mobility-oriented road management and pedestrian-friendly street space design in the near future.

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4291 ◽  
Author(s):  
Qiang Wu ◽  
Jianqing Wu ◽  
Jun Shen ◽  
Binbin Yong ◽  
Qingguo Zhou

With smart city infrastructures growing, the Internet of Things (IoT) has been widely used in the intelligent transportation systems (ITS). The traditional adaptive traffic signal control method based on reinforcement learning (RL) has expanded from one intersection to multiple intersections. In this paper, we propose a multi-agent auto communication (MAAC) algorithm, which is an innovative adaptive global traffic light control method based on multi-agent reinforcement learning (MARL) and an auto communication protocol in edge computing architecture. The MAAC algorithm combines multi-agent auto communication protocol with MARL, allowing an agent to communicate the learned strategies with others for achieving global optimization in traffic signal control. In addition, we present a practicable edge computing architecture for industrial deployment on IoT, considering the limitations of the capabilities of network transmission bandwidth. We demonstrate that our algorithm outperforms other methods over 17% in experiments in a real traffic simulation environment.


Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5069
Author(s):  
Phuong Nam Dao ◽  
Hong Quang Nguyen ◽  
Minh-Duc Ngo ◽  
Seon-Ju Ahn

In this paper, a tracking control approach is developed based on an adaptive reinforcement learning algorithm with a bounded cost function for perturbed nonlinear switched systems, which represent a useful framework for modelling these converters, such as DC–DC converter, multi-level converter, etc. An optimal control method is derived for nominal systems to solve the tracking control problem, which results in solving a Hamilton–Jacobi–Bellman (HJB) equation. It is shown that the optimal controller obtained by solving the HJB equation can stabilize the perturbed nonlinear switched systems. To develop a solution to the translated HJB equation, the proposed neural networks consider the training technique obtaining the minimization of square of Bellman residual error in critic term due to the description of Hamilton function. Theoretical analysis shows that all the closed-loop system signals are uniformly ultimately bounded (UUB) and the proposed controller converges to optimal control law. The simulation results of two situations demonstrate the effectiveness of the proposed controller.


Author(s):  
Ming Xin ◽  
Yunjun Xu ◽  
Ricky Hopkins

It is always a challenge to design a real-time optimal full flight envelope controller for a miniature helicopter due to the nonlinear, underactuated, uncertain, and highly coupled nature of its dynamics. This paper integrates the control of translational, rotational, and flapping motions of a simulated miniature aerobatic helicopter in one unified optimal control framework. In particular, a recently developed real-time nonlinear optimal control method, called the θ-D technique, is employed to solve the resultant challenging problem considering the full nonlinear dynamics without gain scheduling techniques and timescale separations. The uniqueness of the θ-D method is its ability to obtain an approximate analytical solution to the Hamilton–Jacobi–Bellman equation, which leads to a closed-form suboptimal control law. As a result, it can provide a great advantage in real-time implementation without a high computational load. Two complex trajectory tracking scenarios are used to evaluate the control capabilities of the proposed method in full flight envelope. Realistic uncertainties in modeling parameters and the wind gust condition are included in the simulation for the purpose of demonstrating the robustness of the proposed control law.


2021 ◽  
Vol 6 (10) ◽  
pp. 138
Author(s):  
Fábio de Souza Pereira Borges ◽  
Adelayda Pallavicini Fonseca ◽  
Reinaldo Crispiniano Garcia

Urban traffic congestion has a significant detrimental impact on the environment, public health and the economy, with at a high cost to society worldwide. Moreover, it is not possible to continually modify urban road infrastructure in order to mitigate increasing traffic demand. Therefore, it is important to develop traffic control models that can handle high-volume traffic data and synchronize traffic lights in an urban network in real time, without interfering with other initiatives. Within this context, this study proposes a model, based on deep reinforcement learning, for synchronizing the traffic signals of an urban traffic network composed of two intersections. The calibration of this model, including training of its neural network, was performed using real traffic data collected at the approach to each intersection. The results achieved through simulations were very promising, yielding significant improvements in indicators measured in relation to the pre-existing conditions in the network. The model was able to deal with a broad spectrum of traffic flows and, in peak demand periods, reduced delays and queue lengths by more than 28% and 42%, respectively.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yong Li ◽  
Feifei Han ◽  
Xinzhe Zhang ◽  
Kai Peng ◽  
Li Dang

Purpose In this paper, with the goal of reducing the fuel consumption of UAV, the engine performance optimization is studied and on the basis of aircraft/engine integrated control, the minimum fuel consumption optimization method of engine given thrust is proposed. In the case of keeping the given thrust of the engine unchanged, the main fuel flow of the engine without being connected to the afterburner is optimally controlled so as to minimize the fuel consumption. Design/methodology/approach In this study, the reference model real-time optimization control method is adopted. The engine reference model uses a nonlinear real-time mathematical model of a certain engine component method. The quasi-Newton method is adopted in the optimization algorithm. According to the optimization variable nozzle area, the turbine drop-pressure ratio corresponding to the optimized nozzle area is calculated, which is superimposed with the difference of the drop-pressure ratio of the conventional control plan and output to the conventional nozzle controller of the engine. The nozzle area is controlled by the conventional nozzle controller. Findings The engine real-time minimum fuel consumption optimization control method studied in this study can significantly reduce the engine fuel consumption rate under a given thrust. At the work point, this is a low-altitude large Mach work point, which is relatively close to the edge of the flight envelope. Before turning on the optimization controller, the fuel consumption is 0.8124 kg/s. After turning on the optimization controller, you can see that the fuel supply has decreased by about 4%. At this time, the speed of the high-pressure rotor is about 94% and the temperature after the turbine can remain stable all the time. Practical implications The optimal control method of minimum fuel consumption for the given thrust of UAV is proposed in this paper and the optimal control is carried out for the nozzle area of the engine. At the same time, a method is proposed to indirectly control the nozzle area by changing the turbine pressure ratio. The relevant UAV and its power plant designers and developers may consider the results of this study to reach a feasible solution to reduce the fuel consumption of UAV. Originality/value Fuel consumption optimization can save fuel consumption during aircraft cruising, increase the economy of commercial aircraft and improve the combat radius of military aircraft. With the increasingly wide application of UAVs in military and civilian fields, the demand for energy-saving and emission reduction will promote the UAV industry to improve the awareness of environmental protection and reduce the cost of UAV use and operation.


1990 ◽  
Vol 26 (4) ◽  
pp. 647-669 ◽  
Author(s):  
Angelos L. Protopapas ◽  
Aris P. Georgakakos

Sign in / Sign up

Export Citation Format

Share Document