scholarly journals SMALL POWER ELECTRIC TRACTOR PERFORMANCE DURING PLOUGHING WORKS

2020 ◽  
Vol 60 (1) ◽  
pp. 123-129
Author(s):  
M.G. Matache ◽  
M. Cristea ◽  
I. Găgeanu ◽  
A. Zapciu ◽  
E. Tudor ◽  
...  
Keyword(s):  
New Technologies ◽  
Negative Impact ◽  
Current Trend ◽  
Heat Engine ◽  
Mechanical Transmission ◽  
Electric Motors ◽  
Agricultural Work ◽  
Engine Wear ◽  
Draft Force ◽  
Agricultural Tractor

Taking into consideration the current trend to mitigate the agriculture’s negative impact on the environment, this implies using new technologies and equipment for performing agricultural works. Currently, the most used equipment in agriculture is the agricultural tractor with heat engine. One alternative is represented by electric motors, usually powered by batteries. The main advantage for the environment is that zero emissions are released into the atmosphere during agricultural works. Another advantage consists of the nominal torque which could be sustained from almost zero revolutions of the electric motors resulting in lower loads on the batteries with a proper mechanical transmission. Ploughing represents the agricultural work which exploits most of the performances of an agricultural tractor, in terms of fuel consumption and engine wear. Within this paper are presented the tests performed on an electric tractor during ploughing works, at different depths and with different working speeds, in order to assess its autonomy and efficiency with a single battery charge. The electrical parameters of the tractor were recorded during tests, as well as the tractor draft force. The results were used to establish the optimal working regime of the electric tractor during ploughing works.

Ecological Innovations in the Automotive Sector. Part I: Construction Innovations

2018 ◽  
Vol 19 (11) ◽  
pp. 30-35
Author(s):  
Marta Wójcik
Keyword(s):  
Automotive Industry ◽  
Diesel Engines ◽  
New Technologies ◽  
Negative Impact ◽  
The Other ◽  
Automotive Sector ◽  
Environmental Aspects ◽  
Car Industry ◽  
Human Transport ◽  
Sector Part

The automotive sector is one of the fastest growing sectors of economy. The increasing amount of cars both in Polish and world roads results in the immeasurable benefits associated with the goods and human transport. On the other hand, this phenomenon caused the contamination of the environment. During the fuel combustion in petrol or diesel engines, the harmful gases, for example CO2, NOx and SOx are emitted. Apart from the negative impact on the environment, the emission of the aforementioned gases results in the deterioration of human conditions, as well as, the development of civilization diseases. In order to minimalize the harmful influence of an automotive industry on the environment, new technologies which can reduce the consumption of fuel or limit the fumes emission are developed. The first part of paper presents new solutions in an automotive sector which influence on the decline of the negative impact of automobiles on the environment. Additionally, proposed solutions affect the development of a car industry, taking into consideration environmental aspects.

Factors Affecting Customer Switching Behavior towards Hybrid Electrical Vehicles (HEV’s) from a Customer Perspective in Jordan

2018 ◽  
Vol 1 (3) ◽  
pp. 53
Author(s):  
Bushra Mahadin
Keyword(s):  
Decision Making ◽  
Consumer Behaviour ◽  
New Technologies ◽  
International Marketing ◽  
Current Trend ◽  
Switching Behavior ◽  
Future Research ◽  
Decision Making Process ◽  
Customer Switching ◽  
Electrical Vehicles

Purpose-This paper aims to investigate factors that affect customer switching from Internal Combustion Engine Vehicles (ICEV’s) to Hybrid Electrical Vehicles (HEV’s), in Jordan for the period of (2010-2014).Design/methodology/approach-A self-administered survey was hand-delivered to the targeted sample of car users in Jordan. The authors delivered 400 questionnaires to customers, from which 333 were deemed valid for the analysis, corresponding to the percentage of (83.25%) which indicates the validity of the study. Findings- There was no difference in switching behavior between (ICEV’s) and (HEV’s) based on gender in the Jordanian market. Fuel consumption efficiency was the number one variable that supports the switching behavior towards (HEV's), followed by Eco friendliness, lower taxes and technological features. Price and the current trend in the market were the least supporting factors. In addition to that the perception of the battery life of (HEV's), limited choices in the market, lack of information and fear of the relatively new technology were the major hindering factors of choosing an (HEV).Research limitations-Future research needs to investigate other factors that may affect customers’ behavior such as perceived image, trust, and subjective norms. Future research should investigate into the importance of environmental awareness and new technologies, and gender differences in behavior. From an international marketing standpoint, comparative studies between Jordanian and non-Jordanian customers are potential areas of future research for international marketing strategies and cross-cultural consumer behaviour analysis. Practical implications-The paper identifies the determinants of switching behavior. marketers should focus addressing customers concerns in terms of providing enough information and building awareness towards the technology and it's benefits towards the society and the environment.Originality/value-Our study is one of the few in Jordan that investigates the switching behavior towards vehicles technology. Our study is thought to have made a modest contribution to consumer behaviour literature and, specifically, for decision making process. It offers marketers insights into the determinants of switching behavior towards the hybrid vechicle technology and how this contribute to consumers’ decision making process and attitudes to achieve the intended behavioural outcomes

scholarly journals New Circular Challenges in the Development of Take-Away Food Packaging in the COVID-19 Period

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4705
Author(s):  
Ewa Kochańska ◽  
Rafał M. Łukasik ◽  
Maciej Dzikuć
Keyword(s):  
Social Transformation ◽  
Food Packaging ◽  
New Technologies ◽  
Negative Impact ◽  
Raw Materials ◽  
Distribution Channels ◽  
Low Carbon ◽  
Industrial Transformation ◽  
Specific Distribution ◽  
Food Market

The COVID-19 pandemic has set new challenges for the HoReCa industry. Lockdowns have coincided with and strongly impacted the industrial transformation processes that have been taking place for a decade. Among the most important HoReCa transition processes are those related to the rapid growth of the delivery-food market and ordering meals via internet platforms. The new delivery-food market requires not only the development of specific distribution channels, but also the introduction of appropriate, very specific food packaging. Food packaging and its functionality are defined by the administrative requirements and standards applicable to materials that have contact with food and principally through the prism of the ecological disaster caused by enormous amounts of plastic waste, mainly attributed to the food packaging. To meet environmental and administrative requirements, new technologies to produce food packaging materials are emerging, ensuring product functionality, low environmental impact, biodegradability, and potential for composting of the final product. However, predominantly, the obtained product should keep the nutritional value of food and protect it against changes in color or shape. Current social transformation has a significant impact on the food packaging sector, on one hand creating a new lifestyle for society all over the world, and on the other, a growing awareness of the negative impact of humans on the environment and increasing responsibility for the planet. The COVID-19 pandemic has highlighted the need to develop a circular economy based on the paradigm of shortening distribution channels, using local raw materials, limiting the consumption of raw materials, energy, water, and above all, minimizing waste production throughout the life cycle of products, all of which are in line with the idea of low-carbon development.

scholarly journals The Impact of COVID-19 on Surgical Training: the Past, the Present and the Future

2021 ◽  
Author(s):  
Marina Yiasemidou
Keyword(s):  
Infection Control ◽  
Surgical Training ◽  
New Technologies ◽  
Negative Impact ◽  
Elective Surgery ◽  
Control Measures ◽  
Negative Consequences ◽  
Surgical Services ◽  
The World ◽  
The Impact

AbstractThe COVID-19 pandemic and infection control measures had an unavoidable impact on surgical services. During the first wave of the pandemic, elective surgery, endoscopy, and ‘face-to-face’ clinics were discontinued after recommendations from professional bodies. In addition, training courses, examinations, conferences, and training rotations were postponed or cancelled. Inadvertently, infection control and prevention measures, both within and outside hospitals, have caused a significant negative impact on training. At the same time, they have given space to new technologies, like telemedicine and platforms for webinars, to blossom. While the recovery phase is well underway in some parts of the world, most surgical services are not operating at full capacity. Unfortunately, some countries are still battling a second or third wave of the pandemic with severely negative consequences on surgical services. Several studies have looked into the impact of COVID-19 on surgical training. Here, an objective overview of studies from different parts of the world is presented. Also, evidence-based solutions are suggested for future surgical training interventions.

Trend in Sustainability of Facility Design and Production Planning in Manufacturing

2012 ◽  
Vol 229-231 ◽  
pp. 2562-2566
Author(s):  
Seyed Ali Hosseini ◽  
Amin Nosratabadi ◽  
Taravatsadat Nehzati ◽  
Napsiah Binti Ismail
Keyword(s):  
Production Planning ◽  
Manufacturing System ◽  
New Technologies ◽  
Sustainable Manufacturing ◽  
Current Trend ◽  
Critical Issue ◽  
Major Elements ◽  
Facility Design ◽  
Sustainability Concept ◽  
Design And Production

The sustainability concept today is at the front lines of new technologies in manufacturing, products and work methodology. Be a sustainable manufacturer is critical issue to the future of manufacturing system. Various efforts have been conducted around the world to ensure the sustainability of manufacturing system. This study addresses current trend in sustainable manufacturing by focus on two major elements, which are facility design and production planning. Critical challenges are listed and future trends have been discussed.

scholarly journals Dynamics of the distribution mechanism with rocking tappet with roll

2019 ◽  
Vol 10 (3) ◽  
pp. 951
Author(s):  
Florian Ion Tiberiu Petrescu ◽  
Relly Victoria Virgil Petrescu
Keyword(s):  
Fuel Consumption ◽  
Fossil Fuels ◽  
Heat Engine ◽  
Internal Combustion ◽  
Original Method ◽  
Dynamic Coefficient ◽  
Electric Motors ◽  
Great Loss ◽  
Dynamic Synthesis ◽  
Heat Engines

In this paper the authors present shortly an original method to make the dynamic synthesis of a mechanism with rotary cam and rotated tappet with roll, used with priority at the distribution mechanisms from the heat engines with internal combustion. This type of distribution can improve the changes of gases, and may decrease significantly the level of vibration, noises, and emissions. As long as we produce electricity and heat by burning fossil fuels is pointless to try to replace all thermal engines with electric motors, as loss of energy and pollution will be even larger. However, it is well to continuously improve the thermal engines, to reduce thus fuel consumption. At the heat engine with internal combustion a great loss of power is realized and by the distribution mechanism, reason for that we must try to improve the functionality of this mechanism. The dynamic synthesis of this type of distribution mechanism can be made shortly, by the Cartesian coordinates, but to determine these coordinates we need and some trigonometric parameters of the mechanism. Dynamics and forces of this distribution mechanism are presented as well. One introduce the dynamic coefficient D.

scholarly journals Efektywność produkcji FAME na podstawie wymagań normy ISO 14045:2012

Nafta-Gaz ◽  
2021 ◽  
Vol 77 (3) ◽  
pp. 208-214
Author(s):  
Michał Pajda ◽  
◽  
Wojciech Mazela ◽  
Keyword(s):  
Natural Environment ◽  
New Technologies ◽  
Negative Impact ◽  
New Technology ◽  
Methyl Esters ◽  
Production Costs ◽  
Raw Material ◽  
Energy Materials ◽  
The Impact ◽  
Selection Of

The aim of the work was to present the issue of eco-efficiency, based on the PN-EN ISO 14045:2012 standard in relation to the production of fatty acid methyl esters (FAME). The ecoefficiency analysis takes into account economic and environmental aspects in the improvement of products and processes / technologies. Eco-efficiency considers the product and technology throughout the life cycle, from the construction phase, through use to decommissioning. The impact on the natural environment is assessed on the basis of: consumption of energy, materials, dust and gas emissions, waste and sewage. Total costs include: production costs, raw material costs, costs during the use phase including maintenance, repair and operating costs, product disposal or recycling. The eco-efficiency analysis is helpful in making decisions regarding the selection of a new product or designing a new technology, and enables the selection of the variant that is the most economical and has the least possible impact on the natural environment. These issues are particularly important in the case of biofuels. The rapid growth of their production and the European Union’s policy, which aims to increase the share of energy from renewable sources, cause concerns of many experts regarding the threats related to the production of biofuels, both for the environment and food security. In particular, efforts are made to minimize the amount of waste and residues by implementing the idea of a circular economy. This approach promotes the development of new technologies that are more environmentally friendly. Due to the regulations set out in the RED and RED II Directives, there is a chance that the biofuels will have a less negative impact on the environment. This results from the obligation to certify compliance with the sustainability criteria, which is carried out by voluntary systems recognized by the European Commission, such as the KZR INiG System.

scholarly journals How Rating Systems Support Regenerative Change in the Built Environment

2021 ◽  
pp. 131-144
Author(s):  
Melinda Orova ◽  
András Reith
Keyword(s):  
Built Environment ◽  
New Technologies ◽  
Negative Impact ◽  
Positive Impact ◽  
Well Being ◽  
Assessment Tools ◽  
Extensive Literature ◽  
Main Question ◽  
Rating Systems ◽  
Living Building Challenge

AbstractUrban development principles have evolved from sustainability, where the focus was on limiting the negative impact of urban environment, to restorative and regenerative sustainability, where positive impact is needed on global social and ecological systems. This recent paradigm shift requires the development of new tools for practitioners, like design methodologies, new technologies, and assessment methods.To measure the impact of sustainability on the built environment, several building-scale assessment tools exist. The question is how these widespread rating systems support restorative change in the built environment.The main question of the research is answered in three methodological steps. First, the goals of restorative sustainability are summarized from the available extensive literature, including the topics of Place, Energy, Water, Well-being, Carbon, Resources, Equity, Education, and Economics. Then different rating tools (Living Building Challenge, WELL, LEED, BREEAM, DGNB) are analysed how the considered issues and indicators in these rating tools are connected to restorative goals. Then these indicators are assessed how they serve that goal.The result of this study shows the main strengths and gaps in current wide-spread international rating tools regarding their support of restorative sustainability.

scholarly journals Voltage Unbalance Effect on the Behavior of IE2, IE3 And IE4 Induction Motor Classes

2021 ◽  
Author(s):  
Jonathan M. Tabora ◽  
Edson O. de Matos ◽  
Thiago M. Soares ◽  
Maria Emília De L. Tostes
Keyword(s):  
Induction Motor ◽  
Motor Performance ◽  
New Technologies ◽  
Operating Conditions ◽  
Electric Motors ◽  
Voltage Unbalance ◽  
Squirrel Cage ◽  
Squirrel Cage Induction Motor ◽  
Cage Induction Motor ◽  
Hybrid Motor

More than 30 million electric motors are sold every year in the world, in the last 20 years the appearance of more efficient electric motors resulted in the replacement of more than 70% of the old motors installed. New technologies are being presented by manufacturers as substitutes for the squirrel cage induction motor (SCIM). Given this scenario, studies should be carried out to analyze the performance of these motors in the same operating conditions to know their main advantages and drawbacks. This study presents a comparison of the performance of electric motors classes IE2, IE3 and IE4 in the presence of voltage unbalance (VU) with under and over voltage. Results show that not only the unbalance percentage present impacts the motor performance, but also the magnitudes of the voltages present. The VU also results in an increase in the harmonics present in each motor, mainly in the permanent magnet hybrid motor, which presents non-linear characteristics.

scholarly journals Citrus Genetic Transformation: An Overview of the Current Strategies and Insights on the New Emerging Technologies

2021 ◽  
Vol 12 ◽  
Author(s):  
Gabriela Conti ◽  
Beatriz Xoconostle-Cázares ◽  
Gabriel Marcelino-Pérez ◽  
Horacio Esteban Hopp ◽  
Carina A. Reyes
Keyword(s):  
Genetic Transformation ◽  
New Technologies ◽  
Negative Impact ◽  
Protoplast Isolation ◽  
Future Perspective ◽  
Juvenile Period ◽  
Breeding Programs ◽  
Regulatory Processes ◽  
Marker Free

Citrus are among the most prevailing fruit crops produced worldwide. The implementation of effective and reliable breeding programs is essential for coping with the increasing demands of satisfactory yield and quality of the fruit as well as to deal with the negative impact of fast-spreading diseases. Conventional methods are time-consuming and of difficult application because of inherent factors of citrus biology, such as their prolonged juvenile period and a complex reproductive stage, sometimes presenting infertility, self-incompatibility, parthenocarpy, or polyembryony. Moreover, certain desirable traits are absent from cultivated or wild citrus genotypes. All these features are challenging for the incorporation of the desirable traits. In this regard, genetic engineering technologies offer a series of alternative approaches that allow overcoming the difficulties of conventional breeding programs. This review gives a detailed overview of the currently used strategies for the development of genetically modified citrus. We describe different aspects regarding genotype varieties used, including elite cultivars or extensively used scions and rootstocks. Furthermore, we discuss technical aspects of citrus genetic transformation procedures via Agrobacterium, regular physical methods, and magnetofection. Finally, we describe the selection of explants considering young and mature tissues, protoplast isolation, etc. We also address current protocols and novel approaches for improving the in vitro regeneration process, which is an important bottleneck for citrus genetic transformation. This review also explores alternative emerging transformation strategies applied to citrus species such as transient and tissue localized transformation. New breeding technologies, including cisgenesis, intragenesis, and genome editing by clustered regularly interspaced short palindromic repeats (CRISPR), are also discussed. Other relevant aspects comprising new promoters and reporter genes, marker-free systems, and strategies for induction of early flowering, are also addressed. We provided a future perspective on the use of current and new technologies in citrus and its potential impact on regulatory processes.

Sign in / Sign up

Export Citation Format

Share Document