scholarly journals SINTESIS DAN KARAKTERISTIK TiO2 DAN SiO2 SERTA APLIKASINYA TERHADAP KADAR Fe DALAM AIR SUMUR

2017 ◽  
Vol 17 (1) ◽  
pp. 30
Author(s):  
Wening Dwi Prastiwi ◽  
Khoironni Devi Maulana ◽  
Emas Agus Prastyo Wibowo ◽  
Navela Rahma Aji ◽  
Atik Setyani

SINTESIS DAN KARAKTERISTIK TiO2 DAN SiO2 SERTA APLIKASINYA TERHADAP KADAR Fe DALAM AIR SUMURABSTRAK Air merupakan kebutuhan yang terpenting dalam kehidupan manusia. Air berperan banyak dalam berbagai kegiatan manusia oleh karena itu kandungan yang ada di air harus bermanfaat bagi manusia. Banyak kandungan yang terdapat di air yang sangat bermanfaat, tetapi bayak juga kandungan air yang mungkin tidak bermanfaat bahkan bahaya jika digunakan oleh manusia, salah satunya yaitu kandungan logam berat terutama Fe (besi).  Sehingga tujuan pada penelitian ini untuk mengetahui penurunan kadar Fe (besi) dalam air sumur yang di lakukan dengan fotokimia dengan TiO2 dan SiO2 serta dapat mengidentifikasi karakteristik dari TiO2 dan SiO2. Sampel yang digunakan yaitu air sumur 300 m dibagi menjadi tiga masing-masing 100 ml dengan perlakuan yang berbeda. Pada sampel 100 ml pertama tidak diberikan perlakuan dan juga penambahan. Sampel 100 ml kedua diperlakukan dengan penambahan SiO2 dan pengadukan selama 1 jam, dan untuk sampel 100 ml ketiga diperlakukan dengan penambahan TiO2 dan pengadukan selama 1 jam. Ketiga sampel dengan perlakuan yang berbeda tersebut di analisis dengan menggunakan AAS (Atomic Absorption Spectroscopy) di Laboratorium Kimia Universitas Negeri Semarang. Hasil penelitian Analisis menggunakan AAS (Atomic Absorption Spectroscopy) menunjukkan hasil kadar Fe meningkat pada saat penambahan SiO2 dan TiO2 terhadap sampel yang tidak mendapatkan perlakuan tambahan. kadar Fe pada sampel yang tanpa penambahan sebanyak 0,206 mg/L, kemudian kadar Fe pada sampel yang ditambahkan SiO2 sebenyak 0,225 mg/L, dan kadar Fe pada sampel dengan penambahan TiO2 sebanyak 0,214 mg/L. Hal ini dikarenakan bentuk TiO2 dan SiO2 berupa suspensi. Kelemahan sistem suspensi ini adalah pemisahan partikel TiO2 memerlukan waktu yang lama dan biaya yang sangat mahal,serta daya tembus sinar sinar UV yang terbatas karena absorbsi yang kuat oleh TiO2 (efek bayangan) dan spesies organik terlarut. Kata Kunci: air sumur, TiO2, SiO2, Logam besi (Fe).   SYNTHESIS AND CHARACTERISATION OF TiO2 AND SiO2 APPLICATION TOWARD LEVELS OF Fe IN THE WELL WATER ABSTRACTWater is the most important need in human life. Also, water has many contributions in many human activities. Therefore, the existing content in the water must be beneficial for human. However, material contained in water may be beneficial yet dangerous for human as well, for instance heavy metals content, especially Fe (iron). The main objective of this study is to determine decreasing levels of Fe (iron) in the well water that is done by photochemical reaction using TiO2 and SiO2, and identify the characteristics of TiO2 and SiO2. Samples of well water used is 300 ml divided into three part, and every part of 100 ml water will be given different treatment. First 100 mL sample is not given any treatment and addition. Second 100 mL samples treated with the addition of SiO2 and stirring for an hour, and the third sample of 100 mL is treated with the addition of TiO2 and stirring for an hour. All of three samples with different treatments are analyzed using AAS (Atomic Absorption Spectroscopy) in the Chemistry Laboratory Semarang State University. The research result of analysis using AAS (Atomic Absorption Spectroscopy) shows Fe content increased as the addition of SiO2 and TiO2 in the samples than the sample without any additional treatment. Fe content in the sample without addition is 0.206 mg/L, while Fe content in the sample with addition of SiO2 is 0.225 mg/L, and Fe content in the sample with the addition of TiO2 is 0.214 mg/L. This caused by the form of TiO2 and SiO2 is a suspension. The weakness of this suspension system is the TiO2 particle separation takes a long time, very expensive, and also limited UV rays penetrating power because of the strong absorption by TiO2 (shadow effect) and may dissolved organic species. Keywords: well water, TiO2, SiO2, metals iron (Fe).

2017 ◽  
Vol 17 (1) ◽  
pp. 30
Author(s):  
Wening Dwi Prastiwi ◽  
Khoironni Devi Maulana ◽  
Emas Agus Prastyo Wibowo ◽  
Navela Rahma Aji ◽  
Atik Setyani

SINTESIS DAN KARAKTERISTIK TiO2 DAN SiO2 SERTA APLIKASINYA TERHADAP KADAR Fe DALAM AIR SUMURABSTRAK Air merupakan kebutuhan yang terpenting dalam kehidupan manusia. Air berperan banyak dalam berbagai kegiatan manusia oleh karena itu kandungan yang ada di air harus bermanfaat bagi manusia. Banyak kandungan yang terdapat di air yang sangat bermanfaat, tetapi bayak juga kandungan air yang mungkin tidak bermanfaat bahkan bahaya jika digunakan oleh manusia, salah satunya yaitu kandungan logam berat terutama Fe (besi).  Sehingga tujuan pada penelitian ini untuk mengetahui penurunan kadar Fe (besi) dalam air sumur yang di lakukan dengan fotokimia dengan TiO2 dan SiO2 serta dapat mengidentifikasi karakteristik dari TiO2 dan SiO2. Sampel yang digunakan yaitu air sumur 300 m dibagi menjadi tiga masing-masing 100 ml dengan perlakuan yang berbeda. Pada sampel 100 ml pertama tidak diberikan perlakuan dan juga penambahan. Sampel 100 ml kedua diperlakukan dengan penambahan SiO2 dan pengadukan selama 1 jam, dan untuk sampel 100 ml ketiga diperlakukan dengan penambahan TiO2 dan pengadukan selama 1 jam. Ketiga sampel dengan perlakuan yang berbeda tersebut di analisis dengan menggunakan AAS (Atomic Absorption Spectroscopy) di Laboratorium Kimia Universitas Negeri Semarang. Hasil penelitian Analisis menggunakan AAS (Atomic Absorption Spectroscopy) menunjukkan hasil kadar Fe meningkat pada saat penambahan SiO2 dan TiO2 terhadap sampel yang tidak mendapatkan perlakuan tambahan. kadar Fe pada sampel yang tanpa penambahan sebanyak 0,206 mg/L, kemudian kadar Fe pada sampel yang ditambahkan SiO2 sebenyak 0,225 mg/L, dan kadar Fe pada sampel dengan penambahan TiO2 sebanyak 0,214 mg/L. Hal ini dikarenakan bentuk TiO2 dan SiO2 berupa suspensi. Kelemahan sistem suspensi ini adalah pemisahan partikel TiO2 memerlukan waktu yang lama dan biaya yang sangat mahal,serta daya tembus sinar sinar UV yang terbatas karena absorbsi yang kuat oleh TiO2 (efek bayangan) dan spesies organik terlarut. Kata Kunci: air sumur, TiO2, SiO2, Logam besi (Fe).  SYNTHESIS AND CHARACTERISTICS OF TiO2 AND SiO2 APPLICATION TOWARD LEVELS OF Fe IN THE WELL WATERABSTRACTWater is the most important need in human life. Also, water has many contributions in many human activities. Therefore, the existing content in the water must be beneficial for human. However, material contained in water may be beneficial yet dangerous for human as well, for instance heavy metals content, especially Fe (iron). The main objective of this study is to determine decreasing levels of Fe (iron) in the well water that is done by photochemical reaction using TiO2 and SiO2, and identify the characteristics of TiO2 and SiO2. Samples of well water used is 300 ml divided into three part, and every part of 100 ml water will be given different treatment. First 100 mL sample is not given any treatment and addition. Second 100 mL samples treated with the addition of SiO2 and stirring for an hour, and the third sample of 100 mL is treated with the addition of TiO2 and stirring for an hour. All of three samples with different treatments are analyzed using AAS (Atomic Absorption Spectroscopy) in the Chemistry Laboratory Semarang State University. The research result of analysis using AAS (Atomic Absorption Spectroscopy) shows Fe content increased as the addition of SiO2 and TiO2 in the samples than the sample without any additional treatment. Fe content in the sample without addition is 0.206 mg/L, while Fe content in the sample with addition of SiO2 is 0.225 mg/L, and Fe content in the sample with the addition of TiO2 is 0.214 mg/L. This caused by the form of TiO2 and SiO2 is a suspension. The weakness of this suspension system is the TiO2 particle separation takes a long time, very expensive, and also limited UV rays penetrating power because of the strong absorption by TiO2 (shadow effect) and may dissolved organic species. Keywords: well water, TiO2, SiO2, metals iron (Fe).


2019 ◽  
Vol 6 (2) ◽  
pp. 88-93
Author(s):  
Hasty Hamzah ◽  
Nur Rahmah Yusuf

Moringa oleifera Lam. is ones of the multipurpose plants. All parts of the plants are useful to human life and efficacious as a medicine. Moringa oleifera Lam can grow in the lowlands and highlands to an altitude of 1000 masl. This study was conducted to determine the levels of iron (Fe) in Moringa oleifera Lam leaves that grew at different heights using Atomic Absorption Spectroscopy (AAS) the results shows the amount of iron (Fe) in the lowlands of 14 masl (Wameo Village) is 6.28 mg per 100 g of Moringa leaf, medium plains 58 masl (Kantalai Village) is 5.57 mg per 100 g of sample while in the highlands 318 masl (Kaisabu Subdistrict) is 3.86 mg per 100 g of sample. Factors that influence the amount of iron content in Moringa oleifera Lam leaves are height which further affects the intensity of sunlight, humidity. Other factors can be caused by soil conditions (texture, moisture, nutrient, and pH).


2018 ◽  
Vol 28 (4) ◽  
pp. 1259-1264
Author(s):  
Kiril Lisichkov ◽  
Katerina Atkovska ◽  
Neven Trajchevski ◽  
Orce Popovski ◽  
Nadica Todorovska

The presence of some chemical compounds at higher levels than maximum permissible concentrations (MPC) in the drinking water, suggests of water resources pollution. In this paper the following elements were analyzed: total arsenic, cadmium, lead, cooper and zinc. Twelve samples of water from the water supply system from the city of Skopje were examined during one year from three different springs. Also, ten samples of bottled water from three producers from the Macedonian market were tested.The determined average mass concentrations of total As, Cd(II), Pb(II), Cu(II) and Zn(II) in the analyzed water samples from the water supply system are 1.35 μg/l, 0.06 μg/l, 0.6 μg/l, 0.9 μg/l and 1,12 μg/l, respectively, and for the tested bottled water, the mean values ranges from 0.56 - 0.83 μg total As / l, 0.053 - 0.056 μg Cd(II)/l, 0.51 - 0.54 μg Pb(II)/l , 0.6 - 0.87 μg Cu(II)/l and 0.68 - 0.8 μg Zn(II)/l water.The following instrumental analytical methods and techniques were used for the analysis of the tested samples of drinking water: flame atomic absorption spectroscopy (AAS), atomic absorption spectroscopy with hydride cеll, electrothermal atomic absorption spectroscopy.The obtained results are shown in tables and graphic form. According to the obtained results a comparative analysis was carried out indicate that it is a water of good quality that can be used in different branches of the process industry.The obtained results in this paper do not exceed the values of the MPC of the Republic of Macedonia prescribed by the legal regulations for the drinking water, which confirm the health safety of the drinking water from the water supply system in the city of Skopje and the packed waters from the Macedonian market in relation to the tested elements.


Sign in / Sign up

Export Citation Format

Share Document