Electrochemical Impedance Spectroscopy during the Process of Plasma Electrolytic Oxidation

2009 ◽  
Vol 24 (1) ◽  
pp. 111-116 ◽  
Author(s):  
Xue-Lin ZHANG ◽  
Zhao-Hua JIANG ◽  
Zhong-Ping YAO ◽  
Zhen-Dong WU
2014 ◽  
Vol 213 ◽  
pp. 149-153 ◽  
Author(s):  
Sergey V. Gnedenkov ◽  
Sergey L. Sinebryukhov ◽  
Artyom М. Puz' ◽  
Andrey S. Gnedenkov ◽  
Igor E. Vyaliy ◽  
...  

The effects of shape and duration of the current pulses on the physico-chemical properties of the oxide layers on titanium formed by plasma electrolytic oxidation were examined. It was shown that in the investigated conditions transistor power source possess an advantage in comparison with thyristor one. Electrochemical properties of the heterooxide structures were examined by electrochemical impedance spectroscopy and potentiodynamic polarization methods.


Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 272 ◽  
Author(s):  
Quanzhi Chen ◽  
Weizhou Li ◽  
Kui Ling ◽  
Ruixia Yang

The aluminum–titanium (Al-Ti) double-layer composite plate is a promising composite material, but necessary surface protection was required before its application. In this paper, plasma electrolytic oxidation (PEO) was employed to fabricate a ceramic coating on the surface of a Al-Ti double-layer composite plate. To investigate the coating growth mechanism on the Al-Ti double-layer composite plate, a single-Al plate and a single-Ti plate were introduced for comparison experiments. Results showed that, the composite of Al and Ti accelerated the coating growth rate on the part-Ti portion of the composite plate, and that of the part-Al portion was decreased. Electrochemical impedance spectroscopy analysis indicated that the equivalent circuit of the Al-Ti coating was formed by connecting two different circuits in parallel. The reaction behavior revealed that the electric energy during the PEO would leak from the circuit with the weaker blocking effect, and confirmed that the electric energy distribution followed the law of low-resistance distribution. Finally, the mechanism was extended to the PEO treatment on general metal matrix composites to broaden the application theory of the technology.


Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 4
Author(s):  
Dmitry V. Dzhurinskiy ◽  
Stanislav S. Dautov ◽  
Petr G. Shornikov ◽  
Iskander Sh. Akhatov

In the present investigation, the plasma electrolytic oxidation (PEO) process was employed to form aluminum oxide coating layers to enhance corrosion resistance properties of high-strength aluminum alloys. The formed protective coating layers were examined by means of scanning electron microscopy (SEM) and characterized by several electrochemical techniques, including open circuit potential (OCP), linear potentiodynamic polarization (LP) and electrochemical impedance spectroscopy (EIS). The results were reported in comparison with the bare 6061-O aluminum alloy to determine the corrosion performance of the coated 6061-O alloy. The PEO-treated aluminum alloy showed substantially higher corrosion resistance in comparison with the untreated substrate material. A relationship was found between the coating formation stage, process parameters and the thickness of the oxide-formed layers, which has a measurable influence on enhancing corrosion resistance properties. This study demonstrates promising results of utilizing PEO process to enhance corrosion resistance properties of high-strength aluminum alloys and could be recommended as a method used in industrial applications.


Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 401
Author(s):  
Ruzil Farrakhov ◽  
Olga Melnichuk ◽  
Evgeny Parfenov ◽  
Veta Mukaeva ◽  
Arseniy Raab ◽  
...  

The paper compares the coatings produced by plasma electrolytic oxidation (PEO) on commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at. %) for implant applications. The PEO coatings were produced on both alloys in the identical pulsed bipolar regime. The properties of the coatings were examined using scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX), potentiodynamic polarization (PDP), and electrochemical impedance spectroscopy (EIS). The PEO process kinetics was modeled based on the Avrami theorem and Cottrell equation using a relaxation method. The resultant coatings contain TiO2, for both alloys, and NbO2, Nb2O5, ZrO2 for Ti-18Zr-15Nb alloy. The coating on the Ti-18Zr-15Nb alloy has a higher thickness, porosity, and roughness compared to that on cp-Ti. The values of the kinetic coefficients of the PEO process—higher diffusion coefficient and lower time constant for the processing of Ti-18Zr-15Nb—explain this effect. According to the electrochemical studies, PEO coatings on Ti-18Zr-15Nb alloy provide better corrosion protection. Higher corrosion resistance, porosity, and roughness contribute to better biocompatibility of the PEO coating on Ti-18Zr-15Nb alloy compared to cp-Ti.


Coatings ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 993
Author(s):  
Alexander Sobolev ◽  
Tamar Peretz ◽  
Konstantin Borodianskiy

The fabrication of a ceramic coating on the metallic substrate is usually applied to achieve the improved performance of the material. Plasma electrolytic oxidation (PEO) is one of the most promising methods to reach this performance, mostly wear and corrosion resistance. Traditional PEO is carried out in an aqueous electrolyte. However, the current work showed the fabrication and characterization of a ceramic coating using PEO in molten salt which was used to avoid disadvantages in system heating-up and the formation of undesired elements in the coating. Aluminum 7075 alloy was subjected to the surface treatment using PEO in molten nitrate salt. Various current frequencies were applied in the process. Coating investigations revealed its surface porous structure and the presence of two oxide layers, α-Al2O3 and γ-Al2O3. Microhardness measurements and chemical and phase examinations confirmed these results. Potentiodynamic polarization tests and electrochemical impedance spectroscopy revealed the greater corrosion resistance for the coated alloy. Moreover, the corrosion resistance was increased with the current frequency of the PEO process.


2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Leon White ◽  
Youngmi Koo ◽  
Yeoheung Yun ◽  
Jagannathan Sankar

Plasma electrolytic oxidation (PEO) has been used in the past as a useful surface treatment technique to improve the anticorrosion properties of Mg alloys by forming protective layer. Coatings were prepared on AZ31 magnesium alloy in phosphate electrolyte with the addition of TiO2nanoparticles using plasma electrolytic oxidation (PEO). This present work focuses on developing a TiO2functional coating to create a novel electrophotocatalyst while observing the surface morphology, structure, composition, and corrosion resistance of the PEO coating. Microstructural characterization of the coating was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) followed by image analysis and energy dispersive spectroscopy (EDX). The corrosion resistance of the PEO treated samples was evaluated with electrochemical impedance spectroscopy (EIS) and DC polarization tests in 3.5 wt.% NaCl. The XRD pattern shows that the components of the oxide film include Mg from the substrate as well as MgO and Mg2TiO4due to the TiO2nanoparticle addition. The results show that the PEO coating with TiO2nanoparticles did improve the corrosion resistance when compared to the AZ31 substrate alloy.


2015 ◽  
Vol 364 ◽  
pp. 27-34
Author(s):  
Barbara Kazanski ◽  
Alex Lugovskoy ◽  
Ohad Gaon ◽  
Michael Zinigrad

Magnesium is one of the lightest metals and magnesium alloys have quite special properties, interest to which is continuously growing. In particular, their high strength-to-weight ratio makes magnesium alloys attractive for various applications, such as transportation, aerospace industryetc. However, magnesium alloys are still not as popular as aluminum alloys, and a major issue is their corrosion behavior.The present research investigated the influence of the PEO treatment on the corrosion behavior of MRI 230M magnesium alloy. Plasma electrolytic oxidation (PEO) of an MRI 230M alloy was accomplished in a silicate-base electrolyte with KF addition using an AC power source.The corrosion behavior of both treated and untreated samples was evaluated by open circuit potential (OCP) measurements, electrochemical impedance spectroscopy (EIS), linear polarization tests, linear sweep voltammetry (Tafel extrapolation) and chemical methods, such as mass loss and hydrogen evolution, in neutral 3.0 wt% NaCl solution.According to the tests results, PEO process can affect the corrosion resistance of MRI 230M magnesium alloy, though its action is not always unambiguous. An attempt to explain the influence of the PEO treatment on the corrosion behavior of the alloy is presented.


Sign in / Sign up

Export Citation Format

Share Document