scholarly journals CONSIDERATION OF THE "CONDITION-BASED" ALGORITHM OF AVIATION EQUIPMENT OPERATION WITH THE USE OF GROUND MEANS OF TECHNICAL CONTROL AND ON-BOARD MEASURING SYSTEMS IN THE STATE AVIATION OF UKRAINE

Author(s):  
О. Kuzmich ◽  
P. Arkushenko ◽  
М. Andrushko ◽  
I. Haidak ◽  
S. Pashchenko

The article highlights the main aspects and features of the algorithm of aviation equipment operation "condition-based" with the use of ground technical means of control and on-board measuring systems and the formation of decision- making principles for further operation of aircraft. To develop methods of technical diagnostics of any technical equipment, it is necessary to identify which parameters characterize its condition and reliability as well as to establish diagnostic criteria and limit values of the controlled parameters. Depending on the nature of the parameters being controlled, there are parametric and physical methods of diagnostics. Based on the results of the diagnostics, we must get a straight answer: whether or not it is necessary to perform repairs or maintenance of the equipment being tested, taking into account the ensuring of failure-free operation before the next diagnostics. Currently, a large number of different measuring equipment that can measure signals that meet the parameters of the object of control and diagnostics are successfully used to objectively determine the technical condition of aircraft. The use of the laboratory for technical diagnostics of aviation equipment in conjunction with on-board measuring systems will provide an opportunity to make a quality technical diagnostics and reasonable conclusion to decide on further operation of the sample of aviation equipment. The use of mentioned laboratory will also predict the occurrence of failures of aviation equipment systems and units. Only a comprehensive approach to the technical diagnostics of aviation equipment with employment of all means of technical control (ground, on-board) will prevent sudden failures of aviation equipment systems.

Author(s):  
Yevhen Ryzhov ◽  
Lev Sakovych ◽  
Sergey Glukhov ◽  
Yuriy Nastishin

Currently, there is a trend of digital information processing in electronic weapons systems and military equipment. Software-controlled means of communication are being implemented. This requires new approaches in diagnosing them during maintenance, which are significantly different from the process of finding defects in analog tools. Particular attention is paid to the introduction of modern advances in technical diagnostics and metrology. The possibility of using special methods for assessing the technical condition of digital devices (energy-static, energy-dynamic, electromagnetic), both separately and in combination. This slightly increases the average recovery time, but significantly affects the achievement of the required value of a comprehensive indicator of product reliability - its readiness factor. For the first time, the possibility of classifying electronic systems as "absolutely reliable" due to the peculiarities of metrological and diagnostic software is considered. The influence of controlled variables on the value of the product readiness factor is investigated. Depending on the operating conditions of the repair body, the permissible values for the qualification of specialists (average time of inspection and troubleshooting), as well as for the metrological reliability of measuring equipment are justified. According to the results of research, an algorithm for providing the necessary values of reliability indicators of products, both during their design and during operation and recovery in military conditions. It is shown that the greatest influence on the value of the reliability of products has the training of specialists of the repair body, their ability to fully use the capabilities of modern measuring equipment. The article considers the possibility of using methods for diagnosing digital electronic systems and provides an assessment of the quality of diagnostic software for the reliability of systems as a whole.


Author(s):  
Татьяна Круглова ◽  
Tat'yana Kruglova

The main elements of the process equipment are DC and AC motors that largely determine its reliability and efficiency of operation. The constant monitoring of technical condition by methods of technical diagnostics allows a significant extension of equipment life and reduces financial costs. To implement this approach, specialized methods are required. They allow to determine the technical condition of DC and AC motors with a high degree of reliability, distinguishing their faulty state from changing the operating mode. Diagnostics should be performed in the mode of equipment operation; therefore, the use of complex measuring devices is not permissible. This article presents the results of search studies of diagnosis method that meets the above-mentioned requirements. Current, voltage and vibration are selected as diagnostic parameters. It is proposed to analyze them by the wavelet transform. As a result of numerous experiments, the relationship between changes in the wavelet transform coefficients on characteristic scales has been established. This allows to determine the technical condition of the electric motor and the mode of its load, on the basis of which a diagnostic method has been developed using neural networks.


2021 ◽  
pp. 50-57
Author(s):  
V. I. Matveev

The article summarizes the results of the MetrolExpo exhibition, which was held for the first time online. The event focused on instrumentation-demonstration and discussion of the possibilities of modern measuring equipment, analysis of new methods and technologies of accurate measurements that have appeared in recent years. The latest developments, devices and systems for conducting measurements, tests, technical diagnostics, analytical studies, production and functional control from the largest Russian and foreign manufacturers were demonstrated.


2021 ◽  
pp. 41-45
Author(s):  

The hydraulic drive of a construction machine is a complex dynamic system that is subjected to many dynamic loads of a variable nature and operates under conditions of variable external influences caused by various factors. During operation, these loads cause failure of the hydraulic transmission elements. To prevent these malfunctions, technical diagnostics should be applied by determining their current technical condition and remaining service life. The article assesses the working condition of hydraulic cylinders using a mathematical model. Using matlab/simulink software to simulate the hydraulic cylinder and hydraulic piston speed when changing the hydraulic cylinder clearance. The simulation results are presented. Keywords: diagnostic, hydraulic cylinder, simulation, development


Author(s):  
N.A. Makhutov ◽  
◽  
A.P. Cherepanov ◽  
M.V. Lisanov ◽  
◽  
...  

Development and practical implementation of the enterprise industrial safety management system considering the new requirements of the legislation on creation of the state system for monitoring, remote control, technical certification, and diagnostics of technical devices at hazardous production facilities supervised by Rostechnadzor is discussed in the article. To perform automated collection, recording, generalization, systematization, and evaluation of the information on the parameters that characterize safety of the enterprise hazardous equipment as a whole and each technical device, a block diagram of the enterprise automated industrial safety management system is proposed. The basics are suggested for creating the automated system containing a database that includes all the technical documentation, certificates and expert opinions, repair documentation and accompanying documents (orders, instructions, audit conclusions, etc.) for the efficiency of tracking the technical condition in real time considering changes in all the controlled parameters of the enterprise technological complexes. It is noted in the article that the assessment of the technical condition and life of single and unique technical devices that make up the bulk of equipment in hazardous production should be carried out already at the manufacturing stage by combining technical control with technical diagnostics, and their results should be included in the technical passport of the device. The need in this information for the operators is invaluable, especially after working out the manufacturer’s designated period of safe operation and for evaluating the actual technical condition and comparing it with its original, which was documented during fabrication. Data on the initial state allows to qualitatively assess the degradation processes that are developing during operation and consider them when evaluating the life of a technical device and conduct a qualitative audit of the industrial safety management system.


2018 ◽  
Vol 170 ◽  
pp. 01010 ◽  
Author(s):  
Rustam Khayrullin ◽  
Pavel Ivanov

The mathematical model is considered for the formation and implementation of development strategies of the stock of control and measuring instruments (CMI) applied in construction and housing and communal services(HCS), and step-by-step control of efficiency target values of the stock. The model is based on a system of finite - difference equations describing the change of number of the CMI samples with different levels of technical perfection and technical condition at each planning interval. The model allows calculating the required number of CMI for procurement and repairs in the various groups for provide target values of efficiency indices at each planning interval. Controller is number of modern CMI samples for procurement and number of modern and obsolete faulty CMI samples for the repairs. The results of calculations are presented.


2014 ◽  
Vol 633-634 ◽  
pp. 1140-1147
Author(s):  
Vladimir Alekseevich Sokolov

The article suggests an approach to determine structural elements technical condition, based on the mathematical probabilistic apparatus of technical diagnostics. Diagnostics are performed using probabilistic methods of complex technical systems conditions recognition. Probabilistic parameters are calculated according to Bayes’s rule. The paper shows a diagnostics example of intermediate floor elements and systems in the old urban development building. Both the suggested method and information theory methods are used during diagnostics.


2014 ◽  
Vol 584-586 ◽  
pp. 2462-2465
Author(s):  
Viktor Mican ◽  
Jan Česelský

Securing a good technical condition of the building and the technical equipment is an essential part of the management of each property owner. The buildings form a background for the purpose of building use and indirectly significantly influence the smooth running of the entire operation. Therefore, it is very important for each owner that this background works seamlessly and it is not discussed too often.Within the technical management, the technical condition of the property of the customer is completely organized. The professional approach and modern technical facilities increase the life of the building and thereby inflate the value of assets and level of benefit from it.Property and its environment make a reputation of its owner. Well technically managed property increases convenience for users and is a good sign for those who visit it.


2015 ◽  
Vol 8 (1) ◽  
pp. 37-42 ◽  
Author(s):  
Aleksandrs Gasparjans ◽  
Aleksandrs Terebkovs ◽  
Anastasia Zhiravetska

Abstract A method of technical diagnostics of ship diesel engine – generator installation – is proposed. Spectral-power diagnostic parameters of the synchronous generator voltage and currents are used. The electric machine in this case is the multipurpose sensor of diagnostic parameters. A judgment on the quality of the operational processes in diesel engine cylinders and its technical condition is possible on the basis of these parameters. This method is applicable to piston compressor installations with electric drive. On the basis of such parameters as rotating torque, angular speed and angular acceleration it is possible to estimate the quality of the operating process in the cylinders of a diesel engine, the condition of its cylinder-piston group and the crank gear mechanism. The investigation was realized on the basis of a diesel-generator with linear load. The generator operation was considered for the case of constant RL load. Together with the above mentioned, the condition of bearings of synchronous machines, uniformity of the air gap, windings of the electric machine were estimated during the experiments as well. The frequency spectrum of the stator current of the generator was researched and analyzed. In this case the synchronous machine is becoming a rather exact multipurpose diagnostic sensor. The signal of non-uniformity in the operation process of diesel engine cylinders and its technical condition is the increasing of the amplitudes of typical frequencies.


2018 ◽  
Vol 182 ◽  
pp. 01006
Author(s):  
Rafał Grądzki

In this paper, the comparison of three various technical objects (engines of public transport buses) exploitation research for different initial conditions are presented. Object researches were carried out in 2012 and then repeated in 2013. Gathered operational data is presented in three sets (1 – concerning object, 2 – concerning driving conditions, 3 – concerning driver, where set 1 is the collection of diagnostic information Dk, and sets 2 and 3 are the information about object environment U) in form of conventional points (experts numerical assessments). Relation between point information of object and point information of environment was described by coupled equations of state (describing relations between operation condition and technical condition including initial conditions for each analyzed exploitation period). That method allows to determine parameters of technical condition aT and operation condition aR and next, from the course of aT parameter, set of parametrical damage mT(t) and from course of parameter aR – set of momentary damage aR(t). Thus it is possible to evaluate exploitation, technical and operation conditions of each object (bus engine). Received reliability parameters allows to properly control exploitation and service of particular objects and set of objects (fleet of buses) and its elements.


Sign in / Sign up

Export Citation Format

Share Document