The capacity of pipelines to resist collapse or local buckling under a combination of external pressure and bending moment is a major aspect of offshore pipeline design. The importance of this loading combination increases as oil and gas projects in ultra deep-water, beyond 2,000-m water depths, are becoming reality. The industry is now accepting, and codes are explicitly incorporating, limit state design concepts such as the distinction between load controlled and displacement controlled conditions. Thus, deep-water pipeline installation and limit state design procedures are increasing the need to understand fundamental principles of offshore pipeline performance.
Design codes, such as API 1111 (1999) or DNV (1996, 2000), present equations that quantify pipeline capacities under combined loading in offshore pipelines. However, these equations are based on empirical data fitting, with or without reliability considerations. Palmer (1994) pointed out that “it is surprising to discover that theoretical prediction [of tubular members under combined loading] has lagged behind empirical prediction, and that many of the formula have no real theoretical backup beyond dimensional analysis.”
This paper addresses the ultimate strength of pipelines under combined bending and external pressure, especially for diameter-to-thickness ratios, D/t, less than 40, which are typically used for deep water applications. The model is original and has a rational basis. It includes considerations of ovalization, anisotropy (such as those caused by the UOE pipe fabrication process), load controlled, and displaced controlled conditions. First, plastic analysis is reviewed, then pipe local buckling under pure bending is analyzed and used to develop the strength model. Load controlled and displacement controlled conditions are a natural consequence of the formulation, as well as cross section ovalization. Secondly, external pressure effects are addressed. Model predictions compare very favorably to experimental collapse test results.
Rational Modeling of Ultimate Pipe Strength Under Bending and External Pressure
