Research on the Denoising Method of Intelligent Ultrasonic Fuel Consumption Testing in Automobiles

2022 ◽  
Vol 904 ◽  
pp. 43-49
Author(s):  
Bai Xue Fu ◽  
Wei Wang ◽  
Zi Yuan Cheng ◽  
Yu Bao
Keyword(s):  
Fuel Consumption ◽  
Output Signal ◽  
Signal To Noise Ratio ◽  
Signal Amplitude ◽  
Test Accuracy ◽  
Frequency Noise ◽  
Single Chip ◽  
Denoising Method ◽  
Timing Accuracy ◽  
Ultrasonic Time

Using ultrasonic time difference method to test automobile fuel consumption, the test accuracy mainly depends on the testing system timing accuracy and ultrasonic flow sensor output signal-to-noise ratio. At present, the timing accuracy of the single-chip can reach the level of picosecond, and the noise mixed in the output signal of the ultrasonic converter is the main factor affecting the accuracy of fuel consumption testing. When the receiving signal contains noise, it will cause the signal amplitude to fluctuate, making the measurement time error. The analysis of same-frequency noise, circuit noise and colored noise is carried out, and the feasible measures to eliminate noise are put forward to provide reference for accurate calculation of sound and development of high-precision automobile fuel consumption test instruments.

scholarly journals A Denoising Method of Ship Radiated Noise Signal Based on Modified CEEMDAN, Dispersion Entropy, and Interval Thresholding

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 597 ◽  
Author(s):  
Guohui Li ◽  
Zhichao Yang ◽  
Hong Yang
Keyword(s):  
Signal To Noise Ratio ◽  
Noise Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Measurement Technology ◽  
Signal Denoising ◽  
Frequency Noise ◽  
Denoising Method ◽  
Radiated Noise ◽  
Mode Decomposition ◽  
Adaptive Noise

Due to the non-linear and non-stationary characteristics of ship radiated noise (SR-N) signal, the traditional linear and frequency-domain denoising methods cannot be used for such signals. In this paper, an SR-N signal denoising method based on modified complete ensemble empirical mode decomposition (EMD) with adaptive noise (CEEMDAN), dispersion entropy (DE), and interval thresholding is proposed. The proposed denoising method has the following advantages: (1) as an improved version of CEEMDAN, modified CEEMDAN (MCEEMDAN) combines the advantages of EMD and CEEMDAN, and it is more reliable than CEEMDAN and has less consuming time; (2) as a fast complexity measurement technology, DE can effectively identify the type of intrinsic mode function (IMF); and (3) interval thresholding is used for SR-N signal denoising, which avoids loss of amplitude information compared with traditional denoising methods. Firstly, the original signal is decomposed into a series of IMFs using MCEEMDAN. According to the DE value of IMF, the modes are divided into three types: noise IMF, noise-dominated IMF and pure IMF. After noise IMFs are removed, the noise-dominated IMFs are denoised using interval thresholding. Finally, the pure IMF and the processed noise-dominated IMFs are reconstructed to obtain the final denoised signal. The denoising experiments with the Chen’s chaotic system show that the proposed method has a higher signal-to-noise ratio (SNR) than the other three methods. Applying the proposed method to denoise the real SR-N signal, the topological structure of chaotic attractor can be recovered clearly. It is proved that the proposed method can effectively suppress the high-frequency noise of SR-N signal.

scholarly journals A Local Search Maximum Likelihood Parameter Estimator of Chirp Signal

2021 ◽  
Vol 11 (2) ◽  
pp. 673
Author(s):  
Guangli Ben ◽  
Xifeng Zheng ◽  
Yongcheng Wang ◽  
Ning Zhang ◽  
Xin Zhang
Keyword(s):  
Maximum Likelihood ◽  
Local Search ◽  
Signal To Noise Ratio ◽  
Estimation Accuracy ◽  
Chirp Signal ◽  
Estimation Of Parameters ◽  
Parameter Estimator ◽  
Denoising Method ◽  
Time Frequency ◽  
Approximate Estimation

A local search Maximum Likelihood (ML) parameter estimator for mono-component chirp signal in low Signal-to-Noise Ratio (SNR) conditions is proposed in this paper. The approach combines a deep learning denoising method with a two-step parameter estimator. The denoiser utilizes residual learning assisted Denoising Convolutional Neural Network (DnCNN) to recover the structured signal component, which is used to denoise the original observations. Following the denoising step, we employ a coarse parameter estimator, which is based on the Time-Frequency (TF) distribution, to the denoised signal for approximate estimation of parameters. Then around the coarse results, we do a local search by using the ML technique to achieve fine estimation. Numerical results show that the proposed approach outperforms several methods in terms of parameter estimation accuracy and efficiency.

Transmission of Ultrasonic Waves Via Optical Silica Glass Fiber Doped by 7.5% of TiO2 with the Use of Power Sandwich Transducer

2011 ◽  
Vol 36 (1) ◽  
pp. 141-150 ◽  
Author(s):  
Sylwia Muc ◽  
Tadeusz Gudra
Keyword(s):  
Optical Fibre ◽  
Output Signal ◽  
Optical Waveguides ◽  
Experimental Studies ◽  
Signal Amplitude ◽  
Capacitive Sensor ◽  
Ultrasonic Waves ◽  
Sandwich Type ◽  
Type Transducer ◽  
Simultaneous Transmission

Abstract The possibility of acoustic wave propagation in optical waveguides creates new prospects for simultaneous transmission of laser beams and ultrasonic waves. Combined laser-ultrasonic technology could be useful in e.g. surgical treatment. The article presents the results of experimental studies of transmission of ultrasonic wave in optical fibres, the core of which is doped by 7.5% of TiO2, using a sandwich-type transducer. It also presents amplitude characteristics of an ultrasonic signal propagated in the optical fibre. Authors studied the effect which the length of the fibre has on the achieved output signal amplitudes. They presented the relation of the output signal amplitude from a capacitive sensor to the power applied to the sandwich-type transducer. The obtained results were compared with the results produced when using an optical fibre with a core doped by 3% of GeO2, in order to select optical fibre suitable for simultaneous transmission of ultrasonic waves and laser rays.

Research on LIFT Technology for 3D Seismic Denoising in Coalfield

2014 ◽  
Vol 556-562 ◽  
pp. 6328-6331
Author(s):  
Su Zhen Shi ◽  
Yi Chen Zhao ◽  
Li Biao Yang ◽  
Yao Tang ◽  
Juan Li
Keyword(s):  
Signal To Noise Ratio ◽  
High Signal ◽  
3D Seismic ◽  
Signal To Noise ◽  
Denoising Method ◽  
Seismic Processing ◽  
Work Area ◽  
Noise Data ◽  
Noise Ratio ◽  
Effective Signal

The LIFT technology has applied in process of denoising to ensure the imaging precision of minor faults and structure in 3D coalfield seismic processing. The paper focused on the denoising process in two study areas where the LIFT technology is used. The separation of signal and noise is done firstly. Then denoising would be done in the noise data. The Data of weak effective signal that is from the noise data could be blended with the original effective signal to reconstruct the denoising data, so the result which has high signal-to-noise ratio and preserved amplitude is acquired. Thus the fact shows that LIFT is an effective denoising method for 3D seismic in coalfield and could be used widely in other work area.

An Improved Acquisition Method for High-Order BOC-Modulated Signals Based on Fractal Geometry

2013 ◽  
Vol 846-847 ◽  
pp. 1185-1188 ◽  
Author(s):  
Hua Bing Wu ◽  
Jun Liang Liu ◽  
Yuan Zhang ◽  
Yong Hui Hu
Keyword(s):  
Fractal Geometry ◽  
Output Signal ◽  
Signal To Noise Ratio ◽  
High Order ◽  
Main Peak ◽  
Signal To Noise ◽  
Binary Offset Carrier ◽  
Simulation Results ◽  
Modulated Signals ◽  
Acquisition Method

This paper proposes an improved acquisition method for high-order binary-offset-carrier (BOC) modulated signals based on fractal geometry. We introduced the principle of our acquisition method, and outlined its framework. We increase the main peak to side peaks ratio in the BOC autocorrelation function (ACF), with a simple fractal geometry transform. The proposed scheme is applicable to both generic high-order sine-and cosine-phased BOC-modulated signals. Simulation results show that the proposed method increases output signal to noise ratio (SNR).

Analysis of neural networks efficiency when accounting for weight coefficients jitter, leading to reduction in output signal/noise ratio

2021 ◽  
Author(s):  
S.V. Zimina
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Output Signal ◽  
Signal To Noise Ratio ◽  
Signal To Noise ◽  
Useful Signal ◽  
Artificial Neural ◽  
Noise Ratio ◽  
Weight Coefficients

Setting up artificial neural networks using iterative algorithms is accompanied by fluctuations in weight coefficients. When an artificial neural network solves the problem of allocating a useful signal against the background of interference, fluctuations in the weight vector lead to a deterioration of the useful signal allocated by the network and, in particular, losses in the output signal-to-noise ratio. The goal of the research is to perform a statistical analysis of an artificial neural network, that includes analysis of losses in the output signal-to-noise ratio associated with fluctuations in the weight coefficients of an artificial neural network. We considered artificial neural networks that are configured using discrete gradient, fast recurrent algorithms with restrictions, and the Hebb algorithm. It is shown that fluctuations lead to losses in the output signal/noise ratio, the level of which depends on the type of algorithm under consideration and the speed of setting up an artificial neural network. Taking into account the fluctuations of the weight vector in the analysis of the output signal-to-noise ratio allows us to correlate the permissible level of loss in the output signal-to-noise ratio and the speed of network configuration corresponding to this level when working with an artificial neural network.

scholarly journals Ideal ratio mask estimation using supervised DNN approach for target speech signal enhancement

2021 ◽  
pp. 1-15
Author(s):  
Poovarasan Selvaraj ◽  
E. Chandra
Keyword(s):  
Real Time ◽  
Speech Signal ◽  
Signal To Noise Ratio ◽  
Additive White Gaussian Noise ◽  
Time Delay Estimation ◽  
Variational Model ◽  
Speech Signals ◽  
Frequency Noise ◽  
Intrinsic Mode Functions ◽  
Real Time Applications

The most challenging process in recent Speech Enhancement (SE) systems is to exclude the non-stationary noises and additive white Gaussian noise in real-time applications. Several SE techniques suggested were not successful in real-time scenarios to eliminate noises in the speech signals due to the high utilization of resources. So, a Sliding Window Empirical Mode Decomposition including a Variant of Variational Model Decomposition and Hurst (SWEMD-VVMDH) technique was developed for minimizing the difficulty in real-time applications. But this is the statistical framework that takes a long time for computations. Hence in this article, this SWEMD-VVMDH technique is extended using Deep Neural Network (DNN) that learns the decomposed speech signals via SWEMD-VVMDH efficiently to achieve SE. At first, the noisy speech signals are decomposed into Intrinsic Mode Functions (IMFs) by the SWEMD Hurst (SWEMDH) technique. Then, the Time-Delay Estimation (TDE)-based VVMD was performed on the IMFs to elect the most relevant IMFs according to the Hurst exponent and lessen the low- as well as high-frequency noise elements in the speech signal. For each signal frame, the target features are chosen and fed to the DNN that learns these features to estimate the Ideal Ratio Mask (IRM) in a supervised manner. The abilities of DNN are enhanced for the categories of background noise, and the Signal-to-Noise Ratio (SNR) of the speech signals. Also, the noise category dimension and the SNR dimension are chosen for training and testing manifold DNNs since these are dimensions often taken into account for the SE systems. Further, the IRM in each frequency channel for all noisy signal samples is concatenated to reconstruct the noiseless speech signal. At last, the experimental outcomes exhibit considerable improvement in SE under different categories of noises.

scholarly journals Implementation of the Spectral Method for Determining of Measuring Instruments' Dynamic Characteristics

2020 ◽  
Vol 11 (2) ◽  
pp. 155-162
Author(s):  
A. F. Sabitov ◽  
I. A. Safina
Keyword(s):  
Dynamic Response ◽  
Spectral Method ◽  
Amplitude Spectrum ◽  
Low Frequency ◽  
Signal Amplitude ◽  
Measuring Instruments ◽  
Frequency Noise ◽  
Frequency Range ◽  
Calculated Amplitude ◽  
Zero Frequency

The spectral method for establishing dynamic response of measuring instruments basically requires determining the amplitude spectrum of the signal in its informative part that includes the amplitude spectrum at zero frequency. The operating frequency range of existing low-frequency spectrum analyzers is above zero frequency that leads to an uncertainty in dynamic response of measuring instruments determined by the spectral method. The purpose of this paper is to develop a program for calculating the signal amplitude spectrum, starting from zero frequency, to implement a spectral method for determining the dynamic response of measuring instruments on computers equipped with the MatLab package.To implement the spectral method for determining the dynamic response of measuring instruments, we developed a program in the MatLab 2013b environment that determines the signal amplitude spectrum from zero Hertz. The program reads the source data from Excel tables and presents the calculated amplitude spectrum as a chart and a report table.It is shown that the developed program calculates the signal amplitude spectrum with a standard deviation of not more than 3.4 % in the frequency range of 0 to 10 rad/s. The calculated amplitude spectrum allows determining the time constant of first-order aperiodic measuring instruments with an uncertainty of not more than 0.166 % at any noise level, if their frequencies are outside the information part of the spectrum.We demonstrated the claimed advantage of the spectral method for determining dynamic response using the developed program by the example of a high-frequency noise in the transient response of some measuring instruments.

scholarly journals Non-local mean filtering algorithm based on deep learning

2018 ◽  
Vol 232 ◽  
pp. 03025
Author(s):  
Baozhong Liu ◽  
Jianbin Liu
Keyword(s):  
Deep Learning ◽  
Noise Reduction ◽  
Image Denoising ◽  
Signal To Noise Ratio ◽  
Denoising Method ◽  
Filtering Algorithm ◽  
Local Mean ◽  
Non Local ◽  
Reduction Effect ◽  
Mean Filtering

Aimed at the problem that the traditional image denoising algorithm is not effective in noise reduction, a new image denoising method is proposed. The method combines deep learning and non-local mean filtering algorithms to denoise the noisy image to obtain better noise reduction effect. By comparing with Gaussian filtering algorithm, median filtering algorithm, bilateral filtering algorithm and early non-local mean filtering algorithm, the noise reduction effect of the new algorithm is better than the traditional method and the peak signal to noise ratio is compared with the early non-local mean algorithm. The performance is better.

Multichannel absorption compensation with a data-driven structural regularization

Geophysics ◽  
2019 ◽  
Vol 85 (1) ◽  
pp. V71-V80 ◽  
Author(s):  
Xiong Ma ◽  
Guofa Li ◽  
Hao Li ◽  
Wuyang Yang
Keyword(s):  
Cost Function ◽  
Structural Characteristic ◽  
Seismic Data ◽  
High Frequency ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Frequency Noise ◽  
Characteristic Operator ◽  
High Frequency Noise ◽  
The Cost

Seismic absorption compensation is an important processing approach to mitigate the attenuation effects caused by the intrinsic inelasticity of subsurface media and to enhance seismic resolution. However, conventional absorption compensation approaches ignore the spatial connection along seismic traces, which makes the compensation result vulnerable to high-frequency noise amplification, thus reducing the signal-to-noise ratio (S/N) of the result. To alleviate this issue, we have developed a structurally constrained multichannel absorption compensation (SC-MAC) algorithm. In the cost function of this algorithm, we exploit an [Formula: see text] norm to constrain the reflectivity series and an [Formula: see text] norm to regularize the reflection structural characteristic of the compensation data. The reflection structural characteristic operator, extracted from the observed stacked seismic data, is the core of the structural regularization term. We then solve the cost function of SC-MAC by the alternating direction method of multipliers. Benefiting from the introduction of reflection structure constraint, SC-MAC improves the stability of the compensation result and inhibits the amplification of high-frequency noise. Synthetic and field data examples demonstrate that our proposed method is more robust to random noise and can not only improve the resolution of seismic data, but also maintain the S/N of the compensation seismic data.

Sign in / Sign up

Export Citation Format

Share Document