Problems of Current Classification of Building Materials in the Context of Solution of Structure Fire Safety

2014 ◽  
Vol 1057 ◽  
pp. 204-211
Author(s):  
Róbert Leško ◽  
Martin Lopušniak
Keyword(s):  
Fire Safety ◽  
Building Materials ◽  
Point Of View ◽  
Building Structures ◽  
Innovative Solutions ◽  
Energy Economy ◽  
Negative Impacts ◽  
Continuous Demand ◽  
New Procedures

Fire safety, as one of six basic requirements for structures in Slovakia, does not reflect the increase of innovative solutions during last years in the field of building industry. At the present time, energy economy of structures sets the character of structures forming the heat exchange envelope of the building. Continuous demand for the application of ecological materials increases requirements for optimizing the existing or creating new procedures in the solution of fire safety of structures. The existing classification of building structures appears, from the point of view of fire safety, as insufficient one. Comparative analysis of different structural compositions of external cladding is the method that demonstrates in this paper unsuitability of criteria set. The development of new procedures can make more effective and can optimize requirements without any negative impacts on resulting fire safety of the structure.

Design models of structural building materials under multiaxial stress

2020 ◽  
Author(s):  
Yozef Eberhardshtayner ◽  
Sergey Leonovich ◽  
Valentin Dorkin
Keyword(s):  
Building Materials ◽  
Triaxial Compression ◽  
Point Of View ◽  
Theoretical Studies ◽  
Systematic Classification ◽  
Elastic Stresses ◽  
Nonlinear Elastic ◽  
Research And Design ◽  
Experimental And Theoretical Studies

The monograph presents the results of experimental and theoretical studies of the behavior of wood and concrete of various structures under biaxial and triaxial compression. It contains a systematic classification of existing models for concrete that link three-axis nonlinear elastic stresses and deformations, as well as research and subsequent evaluation of some basic models from the point of view of their possible use in the framework of spatial load analysis using FEM. It is intended for scientific and engineering workers of research and design organizations.

scholarly journals Fire Safety Design in Building

2019 ◽  
Vol 3 (1) ◽  
pp. 41-53
Author(s):  
Maksum Tanubrata
Keyword(s):  
Fire Protection ◽  
Fire Safety ◽  
Building Materials ◽  
Building Structures ◽  
Safety Planning ◽  
Smoke Control ◽  
Fire Load ◽  
Partition Walls ◽  
Safety Design ◽  
Fire Safety Design

The main themes for fire safety planning may be described as follows ; Prevention of outbreak and growth of fire , Fire protection of Building structures, smoke control and escape planning. Fire load in a building can be roughly classified into 3 groups: (a). buildings materials, (b). furniture, and (c). daily goods. Building materials including linings, interior material of walls, ceilings, floors, partition walls, etc, and daily goods such as books, clothes, and so on.

Initial State Sorption Measurements

2016 ◽  
Vol 824 ◽  
pp. 589-597
Author(s):  
Akos Lakatos
Keyword(s):  
Building Materials ◽  
Expanded Polystyrene ◽  
Point Of View ◽  
Building Structures ◽  
Fibrous Materials ◽  
Initial State ◽  
Insulating Materials ◽  
Building Physics ◽  
Short Time ◽  
Building Engineering

This paper highlights wetting measurements and results carried out on four different generally used construction and some insulating materials, executed in our Building Physics laboratory in University of Debrecen, Faculty of Engineering, Debrecen, Hungary. The measurements focused on the initial state of the water up-takin procedure (240 min wetting) only, waiting for the equilibrium moisture content was not a goal of this paper. Currently, Aereated concrete, small solid brick, Porotherm and ceramsite-concrete structural members are usually applied in building structures. The measurements of water sorption investigations are so significant from the point of view of thermal sizing of the buildings. To put it simply this article can be imagined as a short time wetting sorption database comparing with our previous results, besides this article can be very useful for everyone in building physics and in building engineering. In addition building materials, insulating materials were tested and will be put forward, as well, eg.: expanded polystyrene, extruded polystyrene, poly-urethane, and some fibrous materials. Totally, 11 materials were investigated, after drying in a Venticell 111 type desiccator apparatus at 343 K to changeless weight and then wetting in a Climacell 111 type climatic chamber, where the relative humidity was varied from 25% to 95% at 293K for 240 min. As result, new isotherm curves for this short time wetting will be presented and will be compared to the literature data, MSZ-04-140-2-1991.

scholarly journals Overview of software designated for the analysis of fire resistance of building structures exposed to various fire models

2020 ◽  
Vol 29 (3) ◽  
pp. 44-53
Author(s):  
T. Yu. Eremina ◽  
D. A. Korolchenko
Keyword(s):  
Fire Resistance ◽  
Fire Safety ◽  
Fire Spread ◽  
Detector Response ◽  
Building Structures ◽  
Safety Assurance ◽  
Fire Models ◽  
Classification Evaluation ◽  
Number Of Iterations

Introduction. When analyzing the fire safety of a facility, the conformity of actual limits of fire resistance of structures to the requirements of statutory documents is checked. Due to the complexity of the equations describing real systems and an extensive number of iterations required to obtain accurate results, software is used to perform calculations. One of the main goals of the paper is to analyze the software designated for the analysis of the fire resistance of building structures in case of different fire models. The paper presents an analysis of the criteria for the evaluation of software programs and their classification, evaluation of recommendations for choosing fire safety software in compliance with the specific requirements of users.Main (analytical) part. The paper analyzes various models of fires, taking into account the stages of fire spread, thermal and mechanical effects on structures exposed to fire, and prerequisites for their use by the software designated for the analysis of the fire resistance of building structures. Fire resistance models of structures, zone and field models, as well as models used to calculate evacuation time and detector response time when solving related problems are considered. The classification of software programmes is analyzed subject to the type of problems to be solved: the behavior of a structure exposed to high temperatures and mechanical impacts in case of real fire, and requirements applicable to safe structures. Certain estimates and assumptions, necessary for specialists to use software in their calculations, are considered.Conclusions. Recommendations on the choice of fire safety assurance software, meeting the specific needs of users, are provided.

RHYNCHOLITES AND THE PROBLEM OF NARROW AND BROAD CONCEPTION OF TAXONS

2018 ◽  
pp. 12-17 ◽  
Author(s):  
I. R. Khuzina ◽  
V. N. Komarov
Keyword(s):  
Sexual Dimorphism ◽  
Morphological Characteristics ◽  
Mass Scale ◽  
Individual Variability ◽  
Point Of View ◽  
The Other ◽  
New Taxon ◽  
Artificial System ◽  
Broad Understanding

The paper considers a point of view, based on the conception of the broad understanding of taxons. According to this point of view, rhyncholites of the subgenus Dentatobeccus and Microbeccus are accepted to be synonymous with the genus Rhynchoteuthis, and subgenus Romanovichella is considered to be synonymous with the genus Palaeoteuthis. The criteria, exercising influence on the different approaches to the classification of rhyncholites, have been analyzed (such as age and individual variability, sexual dimorphism, pathological and teratological features, degree of disintegration of material), underestimation of which can lead to inaccuracy. Divestment of the subgenuses Dentatobeccus, Microbeccus and Romanovichella, possessing very bright morphological characteristics, to have an independent status and denomination to their synonyms, has been noted to be unjustified. An artificial system (any suggested variant) with all its minuses is a single probable system for rhyncholites. The main criteria, minimizing its negative sides and proving the separation of the new taxon, is an available mass-scale material. The narrow understanding of the genus, used in sensible limits, has been underlined to simplify the problem of the passing the view about the genus to the other investigators and recognition of rhyncholites for the practical tasks.

LEGAL, MORAL AND ETHICAL SIDE OF THE OFFENSE, DISCREDITING HONOR EMPLOYEE THE PENAL SYSTEM

2020 ◽  
Vol 10 (2) ◽  
pp. 213-218
Author(s):  
OKSANA KOCHKINA ◽  
◽  
OLGA MARCHUK ◽  
Keyword(s):  
Point Of View ◽  
Professional Activity ◽  
Penal System ◽  
Moral Norms ◽  
Ethical Aspects ◽  
Self Assessment ◽  
Personal Qualities ◽  
Executive System ◽  
Correction System

The article examines the legal and moral and ethical aspects of a misdemeanor that discredits the honor of an employee of the criminal Executive system. The considered reason for dismissal has the main feature associated with the integration of legal and moral norms, which often raises a lot of questions about the attribution of a particular offense to this basis. Using the analysis of normative legal acts, the authors attempt to identify the signs that contribute to the separation of the studied grounds for dismissal from all their diversity. The classification of offenses that discredit the honor of an employee of the criminal Executive system is presented, which allows to systematize and organize the knowledge obtained about the considered grounds for dismissal. The analysis of a misdemeanor that defames the honor of an employee of the penal system from a moral and ethical position gives an understanding, first of all, that it does not have a clear regulation from the point of view of the law, but the consequences of committing such a misdemeanor are clearly legal. The concepts of “honor” and “dignity” are considered as ethical categories and are analyzed as personal qualities that are manifested in an employee of the penal correction system during the period of service. These categories in the behavior of a person or employee are manifested both externally (assessment from the outside) and internally (self-assessment). The article describes the value orientation of an employee of the criminal Executive system to ethical standards in professional activity, which is an integral part of the moral and ethical side of a misdemeanor that discredits the honor of an employee.

Resistance of Binding Systems of Various Compositions to the Action of Molds

2020 ◽  
Vol 786 (11) ◽  
pp. 41-46
Author(s):  
V.V. STROKOVA ◽  
◽  
V.V. NELUBOVA ◽  
M.N. SIVALNEVA ◽  
M.D. RYKUNOVA ◽  
...  
Keyword(s):  
Aging Process ◽  
Building Materials ◽  
Environmental Safety ◽  
Fungal Resistance ◽  
Building Structures ◽  
Vital Activity ◽  
Regulatory Documents ◽  
Living Organisms ◽  
Biological Corrosion ◽  
Test Objects

The dynamic development of urbanization contributes to an increase in emissions of industrial waste, which is the cause dysfunction of the ecosystem balance and leads to the development of biological corrosion on building materials associated with the products of the vital activity of microorganisms. In this regard, it is necessary to assess the resistance of composites to predict the durability of building structures under conditions of biological influence of microorganisms. Binder systems of various compositions were studied: cementless nanostructured binders (NB) based on quartz sand and granodiorite, gypsum, Portland cement and alumina cement. The toxicity of binders was assessed by biotesting on living organisms – cladocerans Daphnia Magna – according to the criteria of the intensity of their growth and viability. As a result, the high environmental safety of NB is substantiated, and the ranking of the studied binders according to the degree of increase in their toxicity to test objects is presented. Fungal resistance was assessed by the ability of molds for growing and reproduction on the studied samples. It was found that the most active in terms of the development of binders were representatives of the genus Aspergillus, the intensity of growing of which in all variants did not decrease below 3 points. Gypsum and NB were especially vulnerable, where the degree of fouling repeatedly reached 5 points. Even the initially biostable cement, after the aging process, lost its stability at different extent. The obtained results indicate the need to increase the resistance of composites for various purposes under conditions of biocorrosion at the stage of design and updating of regulatory documents, including tests for fungal resistance in the list of mandatory.

REFLECTION OF THE CURRENT STATE OF PUBLICISTIC JOURNALISM GENRES IN THE SLOVAK MEDIA ENVIRONMENT

2020 ◽  
Author(s):  
Zuzana Kvetanová
Keyword(s):  
Discourse Analysis ◽  
Point Of View ◽  
Media Theory ◽  
Logical Analysis ◽  
Periodical Press ◽  
Media Environment ◽  
Current State ◽  
Journalistic Practice ◽  
Opinion Journalism

The submitted study addresses the topic of the current state of the opinion journalism and its genres in the Slovak periodical press. The author draws attention to the question of classification of the opinion journalism of a rational and emotional type from the genre categorization point of view and, simultaneously, reflects on its application in the present journalistic practice. This brings a certain rate of confrontation between the defined theoretical premises and their subsequent practical (non-)implementation. The main objective of the study is to clarify the presence of genres of analytical and literary opinion journalism stated by media theory in the environment of the Slovak periodicals. Presentation of the basic terminological axis and the related explication of journalism genres included in the opinion journalism constitute the secondary objectives of the paper. For the purposes of achieving the set objectives, the author uses methods of logical analysis of text in combination with discourse analysis. Similarly, she predicts the evident presence of the phenomenon of hybridization in the Slovak journalistic practice.

Reductionism and holism in the philosophy of medicine

2020 ◽  
pp. 66-74
Author(s):  
E. Zakablukovskiy
Keyword(s):  
Philosophy Of Medicine ◽  
Point Of View ◽  
Social Model ◽  
Macro Level ◽  
New Classification

The article highlights certain aspects of the discussion on the topic of reductionism vs. holism in the philosophy of medicine. Classic radical reductionism is defeated by the concept of emergence. The s.c. bio-medical point of view on a malady, despite its relevance and clear benefit, is not recognized as universal as its adherents may claim, and it yields to an integral psycho-bio-social model. The author introduces a new classification of holism (vitalistic, social and individualistic) and makes appropriate recommendations to clinicians. It is social holism at the macro level that has proven effective in combating the spread of COVID-19.

To the Question of the Classification Patterns of Social Stratification in the Countries of the World (Brief Overview of Some Concepts and Author’s Comment)

2020 ◽  
pp. 65-75
Author(s):  
S. N. Smirnov
Keyword(s):  
Social Sciences ◽  
Social Stratification ◽  
Legal Status ◽  
Scientific Literature ◽  
Point Of View ◽  
The World

The author considers the problems of typification of society. Some concepts of typification of social stratification models in different countries formulated and justified in historical and legal, historical, sociological, and economic scientific literature are reviewed. The circumstances that make it difficult to formulate universal concepts designed for application in the complex of social Sciences are identified. These circumstances include insufficient consideration of legal factors, including the position of the legislator, the specifics of the corporate legal status, and the characteristics of the mechanism for changing individual legal status. The author offers a variant of classification of society types from the point of view of legal registration of their structure. The possibility of distinguishing types such as consolidated companies and segmented companies is justified.

Sign in / Sign up

Export Citation Format

Share Document