The Influence Factors of Silicon Steel Magnetic Property

2014 ◽  
Vol 884-885 ◽  
pp. 345-348 ◽  
Author(s):  
Lei Shang ◽  
Hai Li Yang ◽  
Hong Xu ◽  
Yun Gang Li

Magnetic properties of silicon steel mainly depend on the internal organizational structure and chemical composition. The main factors affecting magnetic properties of silicon steel are analyzed and summarized, including grain size, inclusions (size, type, quantity, and morphology), crystal texture, internal stress, dimensional accuracy, the surface quality of steels, and chemical composition. The impact mechanism of the factors influencing silicon steel magnetic property is explained and these influence factors are interrelated.

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 975
Author(s):  
Antonio Copak ◽  
Vlatka Jirouš-Rajković ◽  
Nikola Španić ◽  
Josip Miklečić

Oriented strand board (OSB) is a commonly used structural wood-based panel for walls and roof siding, but recently the industry has become interested in OSB as a substrate for indoor and outdoor furniture. Particleboard is mainly used in furniture productions and has become popular as a construction material due to its numerous usage possibilities and inexpensive cost. Moisture is one of the most important factors affecting wood-based panel performance and the post-treatment conditions affected their affinity to water. When OSB and particleboard are used as substrates for coatings, their surface characteristics play an important role in determining the quality of the final product. Furthermore, roughness can significantly affect the interfacial phenomena such as adsorption, wetting, and adhesion which may have an impact on the coating performance. In this research particleboard and OSB panels were sanded, re-pressed and IR heated and the influence of surface treatments on hardness, roughness, wetting, water, and water vapour absorption was studied. Results showed that sanding improved the wetting of particleboard and OSB with water. Moreover, studied surface treatments increased water absorption and water penetration depth of OSB panels, and re-pressing had a positive effect on reducing the water vapour absorption of particleboard and OSB panels.


Author(s):  
Руслан Юрьевич Павлов

Актуальность статьи связана с поиском новых способов и методов повышения эффективности борьбы с преступностью, оперативного раскрытия преступлений, а также с набирающим популярность среди криминалистов направлением «криминалистического мышления», овладение навыками которого будет способствовать наиболее полноценному и объективному расследованию уголовных дел. Проблемным в настоящее время является недостаточное качество следствия и необходимость повышения когнитивных способностей следователей (дознавателей). Задачей исследования являлось выявление факторов, влияющих на развитие и формирование криминалистического мышления следователей. Цель работы - провести анализ составных частей процесса становления следователя и особенностей его практической деятельности, влияющих на когнитивные способности с точки зрения криминалистики, путем изучения и сравнения имеющихся материалов по данной тематике. Анализу подвергнуты личностные качества следователя, особенности образовательного процесса и влияние опыта на результаты работы, а также факторы, сопутствующие следственной деятельности (организация труда, уровень стресса, нагрузки и т. д.). Результат проведенного исследования выражен в определении проблемных факторов, влияющих на формирование криминалистического мышления следователя (дознавателя) и возможных путей их преодоления, важности такого мышления, которое остается знанием, постоянно сориентированным в сторону практики. The relevance of the article is related to the search for new ways and methods to improve the effectiveness of the fight against crime, the prompt detection of crimes, as well as the trend of «forensic thinking», which is gaining popularity among criminalists, mastering the skills of which will contribute to the most complete and objective investigation of criminal cases. Problems at present are insufficient quality of investigation and the need to improve the cognitive abilities of investigators (inquirers). The task of the study was to identify factors that influence the development and formation of forensic thinking of investigators. The purpose of the work is- to analyze the components of the process of formation of an investigator and features of his practical activities affecting the cognitive abilities in terms of forensics by studying and comparing existing materials on this topic. The analysis is subjected to the personal qualities of an investigator, the peculiarities of the educational process and the impact of experience on the results of work, as well as factors associated with the investigative activity (organization of work, stress and stress levels, etc.). The result of the study is expressed in the definition of problematic factors affecting the formation of forensic thinking of an investigator (inquirer) and possible ways to overcome them, the importance of such thinking, which remains knowledge, constantly oriented towards practice


2012 ◽  
Vol 192 ◽  
pp. 180-184 ◽  
Author(s):  
Ai Xia He ◽  
Rong Chang Li

Mechanical expanding process for large diameter line pipe, a detailed analysis of factors affecting the quality of the final products of the mechanical expansion and proposed optimization using orthogonal array optimization method, as an indicator of dimensional accuracy and shape accuracy of the products, combination of a variety of specifications of mechanical expanding products, the main process parameters to be optimized. Analysis and discussion of results, revealing the degree of influence of various factors on the quality of the final product, and gives the optimum combination of the results. Experiments show that the combination of optimized process parameters, and more help to improve the accuracy of the size and shape of products.


Foods ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 181
Author(s):  
Carlos Álvarez ◽  
Leonard Koolman ◽  
Michael Whelan ◽  
Aidan Moloney

Tenderness, together with flavour, is the main quality trait that defines consumer acceptance of sheep meat. The factors affecting tenderness can be grouped as those influenced before slaughter, in the early post-mortem intervention and, finally, during the aging period. These factors have been extensively studied with respect to tenderness, but the impact of early post-mortem interventions and subsequent aging on the microbial quality of the final products has not been broadly reviewed to date. In this review, the authors summarize the most recent knowledge on lamb meat tenderness management and how such practices may impact the final meat quality, especially its microbial status. The impacts of pre-slaughter factors (age, sex, diet, genotype and transport) and post-mortem interventions (chilling regime, electrical stimulation, or hanging method), are described and comprehensively discussed.


2019 ◽  
Vol 55 (1) ◽  
pp. 39-46
Author(s):  
W. Kong ◽  
D.G. Cang

The submerged entry nozzle (SEN) clogging has been happening during continuous casting (or CC for short) for nonoriented silicon steel. To solve the problem, the paper studied a flow rate through SEN, a node attached to one of them, and the impact on the clogging. The results showed that when SEN is clogged seriously, the casting speed has to decrease below the target casting speed and that SEN clogging can be predicted by comparing the actual value and the theoretical one of a casting speed. Al2O3 and its composite inclusions caused the SEN clogging and the addition of Ca can solve SEN clogging during CC of the silicon steel both theoretically and practically. Furthermore, the impact of the addition of Ca on the magnetic properties of the steel were analyzed. The results showed that the core loss and the magnetic induction of the silicon steel decreased by using the addition of Ca, which generated more dissolved Aluminum, and the addition of Ca generated more harmful textures, which reduced the magnetic induction.


Author(s):  
Shubham Dubey ◽  
Biro Piroska ◽  
Manjulata Gautam

The world is changing rapidly, so is academics. E-learning has altered the area of academics and education. ICT enabled learning has given ideal services to students by providing any type of content on demand which is proportional to the performance of students. The concentration of learner has been found instinctive; thus there is a need of engaging mind towards course progress with its entirety till the objectives of the course will be achieved. There are several e-learning platforms available as EdX, Udacity, Khan Academy, Alison those have a number of learners registered for various courses. Studies suggest that these platforms suffer from the common problem of learners’ dropping out. Investigations also claim early leaving rate is increasing due to lack of quality of content, distraction factors, learners’ mind change, outdated and succinct information, and some more detraction factors. These issues have been observed on the basis of early leaving rates in various MOOCs. Thus there is a mammoth scope for minimizing the impact of these reasons on the learners’ mind. It can be achieved by identifying these factors affecting learners’ motivation during the course. This study is aiming on identifying these factors. The approach is to explore some certain keywords on previous literature (total 41) and then calculating their frequencies and co-factors associated with them. Both grouped factors contribution and individual factor contribution have been taken care. The study gives a direction for future work towards overcoming these actor and engaging learners in ICT enabled learning.


2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Denitsa Ivanova-Alexandrova ◽  
◽  
◽  

The long lifecycle, also known as durability and the permanence / invariability in the quality of papers and cardbords for graphic art, are today the basic requirements, imposed by printed art in terms of high quality parameters. These two factors are a manifestation, depending on different internal chemical-composition properties of the paper consistency and external influences of the ambience. Longevity and permanence are perceived as a function of aging and are actually observed at a later point in time. It is important to clarify that they are terms with different contents where „durability” is perceived as the ability of the paper or cardboard to resist the impact of wear during use, and the „permanence” is the possibility of product to remain chemically and physically stable for a long period of time.


2019 ◽  
Vol 8 (4) ◽  
pp. 114
Author(s):  
Zev Fried

Market reaction to surprises in earnings announcements has long been used to measure the quality of the information content of the announcement, and studies have explored various factors affecting the response. This study adds to this body of research by factoring in the level of corporate social responsibility (CSR) exhibited by the firm and employs a relatively new measure of a company’s level of CSR, rankings published by JUST Capital. I hypothesize that financial information reported by higher ranked companies is weighed more heavily by investors than those reported by non-ranked or lower-ranked companies. Using earnings response coefficients as a measure of the perceived quality of the financial information reported by the firms, my results provide direct support of the hypothesis, indicating that the market reacts more strongly to earnings surprises for firms with high JUST rankings than for unranked firms or firms with lower rankings. This result contributes new insights into the impact of a firm’s CSR in terms of the perceived quality of a firm’s financial reporting.


2011 ◽  
Vol 117-119 ◽  
pp. 1547-1551
Author(s):  
Xi Li Tan ◽  
Han Zhou ◽  
Ying Song Xu

Real estate price has been one of the hottest discussion topics, especially in recent years, it becomes the focus of attention. In this paper, we aim to study the impact of economic factors on real estate price. By multiple linear regression model and SPSS software, we analyze four economic indicators affecting the real estate price of Jilin city, and make some amendments and testings, the conclusions show the consumption level and housing construction area are important factors affecting the price trend. On this basis, we further to give the corresponding countermeasures and suggestions.


2012 ◽  
Vol 560-561 ◽  
pp. 506-509
Author(s):  
Zhi Jian Li ◽  
Qing Jun Meng ◽  
Liang Liu

The ink transfer rate and ink absorption rate directly affects the quality of printing matter, so it is very important to know the influence factors of the ink transfer rate and ink absorption rate. This paper studied on the impact of offset paper smoothness and offset paper absorbency on the ink transfer rate, the impact of offset paper compactness and offset paper absorbency on the ink absorption rate. The results show that ink transfer rate is affected by offset paper smoothness within a certain range. The ink transfer rate is affected greatly by offset paper absorbency. The ink absorption rate is greatly affected by offset paper compactness and absorbency.


Sign in / Sign up

Export Citation Format

Share Document