Luminescent Properties of Ca1-xBaxSnO3: Eu3+, Dy3+ Composites Prepared by Coprecipitation

2014 ◽  
Vol 989-994 ◽  
pp. 383-386
Author(s):  
Li Min Dong ◽  
Fei Lv ◽  
Qin Li ◽  
Zhi Dong Han ◽  
Xian You Zhang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fluorescence Spectroscopy ◽  
Emission Intensity ◽  
Luminescent Properties ◽  
Emission Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure Morphology ◽  
Scanning Electron

A series of Eu3+, Dy3+ actived Ca1-xBaxSnO3 phosphors were synthesized by coprecipitation method. The structure, morphology and fluorescence property of phosphors were investigated by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and fluorescence spectroscopy. SEM results showed that the as-prepared phosphors are smooth and uniform with the cubic morphology. The incorporation of a small amount of Ba to CaBaSnO3 improved the emission characteristics. Fluorescence spectrum showed the emission intensity is the best with the incorporation of Ba2+ (x = 0.3), when calcination temperature is 900°C.

The Rietveld Refinement of Thermal Synthesized Rhombohedra Boron Nitride Micro-Rod

2013 ◽  
Vol 631-632 ◽  
pp. 78-81 ◽  
Author(s):  
Xiao Jing Yang ◽  
Lan Lan Li ◽  
Xin Hua Zhang ◽  
Pan Shi ◽  
Yue Tian ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Boron Nitride ◽  
Rietveld Refinement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Reitveld Refinement ◽  
Structure Morphology ◽  
Convenient Route ◽  
Scanning Electron

We reported on a convenient route to synthesize rhombohedra boron nitride (r-BN) micro-rod using urea (CO(NH2)2) and sodium borohydride (NaBH4) through thermal treatment at 1300 °C. The structure, morphology, and chemical composition of the obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM). In order to determine the phase composition and abundance of the as-synthsized simples, Rietveld refinement has been performed to analyze the XRD data using the Rietan-2000 program. The results show that the abundance of r-BN is about 90.6 wt % and h-BN is 9.4 wt % deduced from Reitveld refinement.

Synthesis and Up-Conversion Luminescent Properties of Na(Y1.5Na0.5)F6 Hexagonal Prism

2016 ◽  
Vol 697 ◽  
pp. 318-321
Author(s):  
Cui Ping Zhong ◽  
Jie Jun Zhang ◽  
Shu Wang Duo
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Chelating Agent ◽  
Luminescent Properties ◽  
Hexagonal Prism ◽  
X Ray Diffraction ◽  
X Ray ◽  
Near Ultraviolet ◽  
Fluorescence Spectrometer ◽  
Scanning Electron

Na (Y1.5Na0.5)F6 microparticks were prepared by hydrothermal method. EDTA as the chelating agent. The samples were characterized by X-ray diffraction, scanning electron microscopy and fluorescence spectrometer. The X-ray diffraction indicates that the crystal shows a hexagon phase structure. Under the excitation of 980nm laser, the Na (Y1.5Na0.5)F6 exhibited strong up-conversion light: 4F9/2→4I15/2(red), 4H11/2/4S3/2→4I15/2(green) and 4G11/2→2H9/2 (near-ultraviolet).

The Study on the Synthesis and Luminescent Properties of the Phosphor La2O3: Dy3+

2013 ◽  
Vol 683 ◽  
pp. 297-300 ◽  
Author(s):  
Wei Wei Tang ◽  
Wen Yu Zhao ◽  
Bin Fan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Particle Size ◽  
Luminescent Properties ◽  
X Ray ◽  
Particle Size Analyzer ◽  
Structure Morphology ◽  
Size Of Particles ◽  
Luminescent Centers ◽  
Scanning Electron

In this paper, the phosphor La2O3: Dy3+ was synthesized by a gel-sel method and its structure, morphology, particle size, Photoluminescence (PL) and Cathodoluminescence (CL) properties were characterized by X-Ray powder diffraction (XRD), scanning electron microscopy (SEM),laser particle size analyzer, Photoluminescence (PL) and Cathodoluminescence (CL) spectra, respectively. The results indicate that the Dy3+ as luminescent centers substituted La3+ ions into the single crystal lattice of La2O3 and located in the sites of C3. The size of particles was nearly spherical with the diameter of about 1μm. The sample can be 350~500nm light into visible light. Whether Photoluminescence (PL) or Cathodoluminescence (CL), Two emission peaks at about 489 nm (blue) and 575 nm (yellow) were corresponding to 4F9/2-6H15/2 and 4F9/2-6H13/2 transitions with the maximum emission wavelength at about 575 nm. This white phosphor can be applied both in LEDs and in the field emission devices.

Analysis of the Hydroxyapatite Incorporate MTA Dental Application

2012 ◽  
Vol 727-728 ◽  
pp. 1381-1386 ◽  
Author(s):  
Criseuda Maria Benício Barros ◽  
Sara Verusca de Oliveira ◽  
Janaina Benício Marques ◽  
Kaline Melo de Souto Viana ◽  
Ana Cristina Figueiredo de Melo Costa
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mineral Trioxide Aggregate ◽  
X Ray Diffraction ◽  
Absorption Bands ◽  
Radiographic Appearance ◽  
X Ray ◽  
Structure Morphology ◽  
Dental Application ◽  
Scanning Electron

This research was incorporated the hydroxyapatite in a mineral trioxide aggregate sealer, with the aim of studying this influence in the structure, morphology and radiopacity of the cement to obtain osteoconductive material. The samples were characterized by X ray diffraction (XRD), spectrometry fluorescence X ray (EDX), spectroscopy transform infrared Fourier (FTIR), scanning electron microscopy (SEM) and radiographic appearance. Through the results obtained by XRD for the new sealer observed the formation of phases HAp and MTA evidenced by the presence of phases: CaO, SiO2and Bi2O verified also by EDX. Through FTIR was observed the presence of absorption bands related to links Ca-O, Si-O and Bi-O present in MTA and P-O present in HAp. The morphology visualized by SEM consists of irregular agglomerates with the formation of pre-sintered particles. The sample MTA/HAp3% presented radiopacity viable for their application as endodontic cement.

Preparation and Properties of Porous Barium Ferrite

2010 ◽  
Vol 177 ◽  
pp. 257-259
Author(s):  
Shu Fang Zheng ◽  
Guo Xuan Xiong ◽  
Hai Qing Huang ◽  
Liu Jun Luo
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Barium Ferrite ◽  
Sol Gel ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure Morphology ◽  
Gel Technique ◽  
Scanning Electron

Nano-porous Barium ferrite (BaFe12O19) nanoparticles were synthesized by sol-gel technique using CTAB as template. The structure, morphology, and magnetic properties of samples were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM). The results show that particles size are about 45 nm to 65 nm. And the nanoparticles show a saturation magnetization (Ms) of 62.831 emu/g, a coercivity (Hc) of 5481.0 Oe and a remament magnetization (Mr) of 33.083 emu/g.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Environmental scanning electron microscopy of fresh human gallstones reveals new morphologies of precipitated calcium salts

1992 ◽  
Vol 50 (2) ◽  
pp. 1322-1323
Author(s):  
Howard S. Kaufman ◽  
Keith D. Lillemoe ◽  
John T. Mastovich ◽  
Henry A. Pitt
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Scanning Electron Microscopy ◽  
Environmental Scanning ◽  
X Ray Diffraction ◽  
Calcium Salts ◽  
Cholesterol Gallstones ◽  
X Ray ◽  
Ca Carbonate ◽  
Scanning Electron

Gallstones contain precipitated cholesterol, calcium salts, and proteins. Calcium (Ca) bilirubinate, palmitate, phosphate, and carbonate occurring in gallstones have variable morphologies but characteristic windowless energy dispersive x-ray (EDX) spectra. Previous studies of gallstone microstructure and composition using scanning electron microscopy (SEM) with EDX have been limited to dehydrated samples. In this state, Ca bilirubinates appear as either glassy masses, which predominate in black pigment stones, or as clusters, which are found mostly in cholesterol gallstones. The three polymorphs of Ca carbonate, calcite, vaterite, and aragonite, have been identified in gallstones by x-ray diffraction, however; the morphologies of these crystals vary in the literature. The purpose of this experiment was to study fresh gallstones by environmental SEM (ESEM) to determine if dehydration affects gallstone Ca salt morphology.Gallstones and bile were obtained fresh at cholecystectomy from 6 patients. To prevent dehydration, stones were stored in bile at 37°C. All samples were studied within 4 days of procurement.

PENINGKATAN LAJU DISOLUSI ACYCLOVIR DENGAN METODE SISTEM DISPERSI PADAT MENGGUNAKAN POLOXAMER 188

2016 ◽  
Vol 5 (1) ◽  
pp. 6
Author(s):  
Budi Setiawan ◽  
Erizal Zaini ◽  
Salman Umar
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Differential Thermal Analysis ◽  
Fourier Transform Infrared ◽  
X Ray Diffraction ◽  
Poloxamer 188 ◽  
X Ray ◽  
Scanning Electron

Sebuah penelitian tentang sistem dispersi padat dari asiklovir dengan poloxamer 188 telah dilakukan formulasi dengan pencampuran secara fisika dengan rasio 1 : 1, 1 : 3, 1 : 5 dan dispersi padat 1 : 1, 1 : 3, 1 : 5 dan penggilingan 1:1 sebagai pembanding. Dispersi padat dibuat menggunakan metode pencairan (fusi), yang digabung dengan poloxamer 188 pada hotplate kemudian asiklovir dimasukkan ke dalam hasil poloxamer 188 lalu di kocok hingga membentuk masa homogen. Semua formula yang terbentuk termasuk asiklovir poloxamer 188 murni dianalisis karakterisasinya dengan Differential Thermal Analysis (DTA), X-ray Diffraction, Scanning Electron Microscopy (SEM), dan Fourier Transform Infrared (FTIR), kemudian pengambilan dilakukan  (penentuan kadar) mengunakan spektrofotometer UV pada panjang gelombang 257,08 nm dan uji laju disolusi dengan aquadest bebas CO2 menggunakan metode dayung. Hasil pengambilan  (penentuan kadar) menunjukkan bahwa semua formula memenuhi persyaratan farmakope Amerika edisi 30 dan farmakope Indonesia edisi 4 yaitu 95-110%. Sedangkan hasil uji laju disolusi untuk campuran fisik 1: 1, dan dispersi padat 1: 1, dan penggilingan 1: 1 menunjukkan peningkatan yang nyata dibandingkan asiklovir murni. Hal ini juga dapat dilihat dari hasil perhitungan statistik  menggunakan analisis varian satu arah  SPSS 17.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

scholarly journals Analytical study of Buddha sculptures in Jingyin temple of Taiyuan, China

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaojian Bai ◽  
Chen Jia ◽  
Zhigen Chen ◽  
Yuxuan Gong ◽  
Huwei Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Analytical Study ◽  
Energy Dispersive Spectrometry ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Ancient China ◽  
X Ray ◽  
Unique Style ◽  
Scanning Electron

AbstractWith exquisite design and unique style, the painted sculptures of Tutang Buddha and two attendants Buddha in Jingyin Temple are precious cultural heritages of China. The sculpture of Tutang Buddha, which was carved from a mound and painted by ancient craftsmen, was rarely found in ancient China. However, due to natural and human factors, the sculptures were severely damaged. Obviously, they require urgent and appropriate protection and restoration. In this study, samples taken from the sculptures were analysed through multiple analytical techniques, including scanning electron microscopy with energy dispersive spectrometry (SEM–EDS), Raman spectroscopy, X-ray diffraction (XRD), optical microscopy (OM) and granulometry. The analysis results enable us to infer the techniques used by the craftsmen in making the sculptures and provide a reliable evidence for the conservation and future protection of these and similar sculptures.

Sign in / Sign up

Export Citation Format

Share Document