Study on Coupling Coefficient and Fabrication of a Kind of Symmetric Twin-Core Silica Fiber

2010 ◽  
Vol 439-440 ◽  
pp. 1404-1408
Author(s):  
Jian Peng ◽  
Li Song Liu ◽  
Lei Yao ◽  
Shui Sheng Jian
Keyword(s):  
Coupling Coefficient ◽  
Coupled Mode Theory ◽  
Relative Refractive Index ◽  
Improved Method ◽  
Core Diameter ◽  
Coupled Mode ◽  
The Core ◽  
Measurement Results ◽  
Refractive Index Difference ◽  
Core Fiber

The coupling coefficient of twin-core fiber is discussed with coupled-mode theory in this paper. It shows that the coupling coefficient is related with the pump wavelength, the core diameter, the distance between the centers of the two cores and the relative refractive index difference. And the parameters of the twin-core fibers can be optimized to satisfy different requirements. Using the theory, the twin-core fibers are fabricated by an improved method. The measurement results have an obvious progress than previous work.

scholarly journals Multi-core fiber design and analysis: coupled-mode theory and coupled-power theory

2011 ◽  
Vol 19 (26) ◽  
pp. B102 ◽  
Author(s):  
Masanori Koshiba ◽  
Kunimasa Saitoh ◽  
Katsuhiro Takenaga ◽  
Shoichiro Matsuo
Keyword(s):  
Coupled Mode Theory ◽  
Power Theory ◽  
Mode Theory ◽  
Coupled Mode ◽  
Fiber Design ◽  
Core Fiber

scholarly journals Analysis of Wavelength Sensitivity of Coupling Coefficients and Inter-core Crosstalk in a 9 core Multi-core Fiber

2021 ◽  
Author(s):  
Afzal Hossain ◽  
Satya Prasad Majumder
Keyword(s):  
Propagation Distance ◽  
Wavelength Dependence ◽  
Coupled Mode Theory ◽  
Coupling Coefficients ◽  
Propagation Length ◽  
Coupled Mode ◽  
Wavelength Sensitivity ◽  
The Mean ◽  
Core Fiber ◽  
Core Pitch

Abstract Wavelength dependence of coupling coefficients and inter-core crosstalk in a 9-core homogeneous multi-core optical fiber (MCF) are investigated analytically. The analysis is further extended to evaluate the mean crosstalk power at the output of any core with light launched into other core of the MCF. Propagation length dependence of mean crosstalk power is investigated using both coupled mode theory (CMT) and coupled power theory (CPT). CPT based results show that mean crosstalk power linearly dependent on propagation distance, and it is higher for higher values of coupling coefficient. On the other hand, the mean crosstalk power is found to oscillate with the propagation distance in case of CMT. It is also observed that the mean crosstalk power (dB) is more prominent at a lower wavelength for a given propagation distance. The behavour of relative crosstalk power is also investigated analytically where it is noticed that the relative crosstalk power increases almost linearly with core pitch and with wavelength. It is also seen that the relative crosstalk power (dB) is more in an MCF with lower number of cores when it is varied with respect to wavelength. This is due to the increase of core pitch under the same cladding diameter and cladding thickness limitations.

Magnetic Properties of Fe3O4/CoFe2O4 Composite Nanoparticles with Core/Shell Architecture

2020 ◽  
Vol 65 (10) ◽  
pp. 904
Author(s):  
V. O. Zamorskyi ◽  
Ya. M. Lytvynenko ◽  
A. M. Pogorily ◽  
A. I. Tovstolytkin ◽  
S. O. Solopan ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Spinel Ferrite ◽  
Composite Nanoparticles ◽  
Core Shell ◽  
Cofe2o4 Nanoparticles ◽  
Core Diameter ◽  
The Core ◽  
Shell Particles ◽  
Interface Parameters ◽  
Shell Composite

Magnetic properties of the sets of Fe3O4(core)/CoFe2O4(shell) composite nanoparticles with a core diameter of about 6.3 nm and various shell thicknesses (0, 1.0, and 2.5 nm), as well as the mixtures of Fe3O4 and CoFe2O4 nanoparticles taken in the ratios corresponding to the core/shell material contents in the former case, have been studied. The results of magnetic research showed that the coating of magnetic nanoparticles with a shell gives rise to the appearance of two simultaneous effects: the modification of the core/shell interface parameters and the parameter change in both the nanoparticle’s core and shell themselves. As a result, the core/shell particles acquire new characteristics that are inherent neither to Fe3O4 nor to CoFe2O4. The obtained results open the way to the optimization and adaptation of the parameters of the core/shell spinel-ferrite-based nanoparticles for their application in various technological and biomedical domains.

Comparative crosstalk performance analysis of different configurations of heterogeneous multicore fiber

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Umar Farooque ◽  
Rakesh Ranjan
Keyword(s):  
Refractive Index ◽  
Mode Coupling ◽  
The Other ◽  
Heterogeneous Multicore ◽  
Coupled Mode ◽  
The Core ◽  
Bending Radius ◽  
Multicore Fiber ◽  
The Impact ◽  
Core Pitch

AbstractIn order to select the heterogeneous multicore fiber (MCF) configuration with ultra-low crosstalk and low peak bending radius, comparative crosstalk analysis have been done for the three possible core configurations, namely, Configuration 1 - different refractive index (R.I.) and different radius, Configuration 2 - different R.I., and Configuration 3 - different radius. Using the coupled mode equation and the simplified expressions of mode coupling coefficient (MCC) for different configurations of heterogeneous cores, the crosstalk performance of all the heterogeneous MCF configurations along with the homogeneous MCF have been investigated analytically with respect to core pitch (D) and fiber bending radius (${R}_{b}$). Further, these expressions of MCC have been extended to obtain the simplified expressions of MCC for the estimation of crosstalk levels in respective trench-assisted (TA) heterogeneous MCF configurations. It is observed from the analysis that in Configuration 1, crosstalk level is lowest and the rate of decrease in the crosstalk with respect to the core pitch is highest compared to the other configurations of heterogeneous MCF. The values of crosstalk obtained analytically have been validated by comparing it with the values obtained from finite element method (FEM) based numerical simulation results. Further, we have investigated the impact of a fixed percent change (5%) in the core parameters (radius and/or R.I.) of one of the core of a homogeneous MCF, to realize the different heterogeneous MCF configurations, on the variations in crosstalk levels, difference in the mode effective refractive index of the core 1 and core 2 ($\Delta {n}_{eff}={n}_{eff1}-{n}_{eff2}$), and the peak bending radius (${R}_{pk}$). For the same percent variations (5%) in the core parameters (radius and/or R.I.) of different configurations of cores (Config. 1-Config. 3), Config. 1 MCF has highest variation in $\Delta {n}_{eff}$ value compared to other configurations of MCF. Further, this highest variation in $\Delta {n}_{eff}$ value of Config. 1 MCF results in smallest peak bending radius. The smaller value of peak bending radius allows MCF to bend into smaller radius. Therefore, Configuration 1 is the potential choice for the design of MCF with smaller peak bending radius and ultra-low crosstalk level compared to the other configurations of SI-heterogeneous MCF.

scholarly journals Geometrical Scaling of Antiresonant Hollow-Core Fibers for Mid-Infrared Beam Delivery

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 420
Author(s):  
Ang Deng ◽  
Wonkeun Chang
Keyword(s):  
Structural Parameters ◽  
Transmission Band ◽  
Confinement Loss ◽  
Hollow Core ◽  
Core Size ◽  
Core Diameter ◽  
Mid Infrared ◽  
The Core ◽  
Tubular Type ◽  
Beam Delivery

We numerically investigate the effect of scaling two key structural parameters in antiresonant hollow-core fibers—dielectric wall thickness of the cladding elements and core size—in view of low-loss mid-infrared beam delivery. We demonstrate that there exists an additional resonance-like loss peak in the long-wavelength limit of the first transmission band in antiresonant hollow-core fibers. We also find that the confinement loss in tubular-type hollow-core fibers depends strongly on the core size, where the degree of the dependence varies with the cladding tube size. The loss scales with the core diameter to the power of approximately −5.4 for commonly used tubular-type hollow-core fiber designs.

scholarly journals Biosensing Near the Exceptional Point Based on Resonant Optical Tunneling Effect

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 426
Author(s):  
Yang Liu ◽  
Pengyun Yan ◽  
Feng Liu ◽  
Aoqun Jian ◽  
Shengbo Sang
Keyword(s):  
Exceptional Point ◽  
Tunneling Effect ◽  
Coupled Mode Theory ◽  
Environment Protection ◽  
Label Free ◽  
Liquid Sample ◽  
Water Safety ◽  
Coupled Mode ◽  
Drinking Water Safety ◽  
Optical Tunneling

Inspired by exceptional point (EP) sensing in non-Hermitian systems, in this work, a label-free biosensor for detecting low-concentration analytes is proposed, via a special multilayer structure: a resonant optical tunneling resonator. Due to the square root topology near the exceptional point, a recognized target analyte perturbs the system deviated from the exceptional point, leading to resolvable modes splitting in the transmission spectrum. The performance of the designed sensor is analyzed by the coupled-mode theory and transfer matrix method, separately. Here, the simulation results demonstrate that the obtained sensitivity is 17,120 nm/imaginary part unit of refractive index (IP) and the theoretical detection limit is 4.2 × 10−8 IP (regarding carcinoembryonic antigen (CEA), the minimum detection value is 1.78 ng). Instead of the typical diffusion manner, the liquid sample is loaded by convection, which can considerably improve the efficiency of sample capture and shorten the response time of the sensor. The sketched sensor may find potential application in the fields of biomedical detection, environment protection, and drinking water safety.

Sign in / Sign up

Export Citation Format

Share Document