Ultrastructure of antennal sensilla of female Ceratosolen solmsi marchali (Hymenoptera: Chalcidoidea: Agaonidae: Agaoninae)

2009 ◽  
Vol 141 (5) ◽  
pp. 463-477 ◽  
Author(s):  
Zongbo Li ◽  
Pei Yang ◽  
Yanqiong Peng ◽  
Darong Yang
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Sensory Neurons ◽  
External Morphology ◽  
Antennal Sensilla ◽  
Basiconic Sensilla ◽  
Sensilla Trichodea ◽  
Transmission Electron

AbstractFig-pollinating wasps are phytophagous wasps that mainly use olfaction to locate their fig (Ficus L., Moraceae) hosts. To provide a morphological framework for studying agaonid olfaction, we examined the antennal sensilla of female Ceratosolen solmsi marchali Mayr by scanning and transmission electron microscopy. We identified and characterized (ultrastructure, distribution, abundance, and position) 13 types of sensilla: multiporous placoid sensilla (types 1 and 2), basiconic sensilla (types 1 and 2), basiconic capitate peg sensilla, sensilla chaetica (types 1–3), sensilla trichodea, sensilla coeloconica (types 1–3), and one specialized sensillum regarded as a sensillum obscurum. We suggest that five types are chemoreceptors because they are porous and innervated by multiple sensory neurons. Sensilla coeloconica type 1 may also function as chemoreceptors, based on external morphology. Other sensilla may be involved in mechanoreception, thermo- and (or) hygro-reception, or pressure detection. We discuss our results in relation to the lifestyle of C. solmsi marchali.

Ultrastructure of Female Antennal Sensilla of an Endoparasitoid Wasp,Quadrastichus mendeliKim & La Salle (Hymenoptera: Eulophidae: Tetrastichinae)

2018 ◽  
Vol 24 (4) ◽  
pp. 431-441 ◽  
Author(s):  
Zong-You Huang ◽  
Yu-Jing Zhang ◽  
Jun-Yan Liu ◽  
Zhen-De Yang ◽  
Wen Lu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Host Location ◽  
Antennal Sensilla ◽  
Sensory Receptors ◽  
Future Studies ◽  
Sensilla Trichodea ◽  
Internal Morphology ◽  
Transmission Electron ◽  
Host Detection

AbstractThe antennal sensilla of femaleQuadrastichus mendeliKim & La Salle (Hymenoptera: Eulophidae: Tetrastichinae) were observed with scanning and transmission electron microscopy in this study. The antenna ofQ. mendeliwas geniculate, and the flagellum was composed of seven subsegments. Six distinct types of sensory receptors were observed, including sensilla basiconic capitate peg, sensilla böhm, sensilla chaetica, sensilla campaniformia, sensilla placodea and sensilla trichodea. Sensilla basiconic capitate pegs were found on the flagellomeres, and Böhm sensilla were found on the basal part of scape and the pedicel. Two morphological subtypes of sensilla chaetica were found on the antennae, and sensilla campaniformia were only found on the pedicel. Sensilla placodea were divided into two morphological subtypes that were found on the flagellomeres. Sensilla trichodea were found on the 2nd–6th flagellomere. By comparison to existing antennal sensilla, it was found that sensilla basiconic capitate peg, sensilla chaetica, sensilla placodea and sensilla trichodea were the most common sensilla of the parasitoids of Eulophidae. The external and internal morphology, types, number, distribution, length, and width of these sensilla were described, and their possible functions are discussed in conjunction with the host-detection behavior. Future studies on the host location mechanisms inQ. mendeliwill be facilitated by these observations.

Antennal Sensilla of Chrysis shanghalensis (Hymenoptera: Chrysididae), a Larval Ectoparasite of Monema flavescens (Lepidoptera: Limacodidae)

2021 ◽  
Vol 56 (1) ◽  
pp. 1-11
Author(s):  
Shu Z. Yang ◽  
Mei H. Yang ◽  
Yun Xu ◽  
Jin T. Zhang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Natural Enemy ◽  
Tree Species ◽  
External Morphology ◽  
Antennal Sensilla ◽  
Sensilla Basiconica ◽  
Sensilla Trichodea ◽  
Males And Females ◽  
Scanning Electron

Abstract Chrysis shanghalensis Smith (Hymenoptera: Chrysididae) is an ectoparasitoid and important natural enemy of Monema flavescens Walker (Lepidoptera: Limacodidae), a serious defoliator of a number of tree species. The external morphology of the antennal sensilla of this parasitoid was examined by scanning electron microscopy, and types and distribution of sensilla were recorded. The antennae of C. shanghalensis were geniculate in shape and composed of a scape with radicula, a pedicel, and a flagellum divided into 11 flagellomeres in males and females. Cuticular pore and 14 types of sensilla were identified on the antennae of both sexes. These included aporous Böhm's bristles, sensilla trichodea 1, 2, and 3 (nonporous), sensilla trichodea 4 (multiporous), two types of sensilla chaetica (nonporous), four morphological types of sensilla basiconica (multiporous), two morphological types of sensilla coeloconica (multiporous), and one type of sensillum campaniforme (nonporous).

scholarly journals Angiopoietin-1 Promotes the Integrity of Neovascularization in the Subcutaneous Matrigel of Type 1 Diabetic Rats

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
ShaoBin LI ◽  
HeQin Zou ◽  
MinMin Gong ◽  
YuQin Chen ◽  
XiaoYong Yan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Treatment Group ◽  
Abdominal Cavity ◽  
Vascular Endothelial Cell ◽  
Diabetic Rats ◽  
Vascular Endothelial ◽  
Transmission Electron ◽  
Junction Protein

Objective. This study aimed to investigate the effects of Ang-1 on neovascularization of diabetic organs by subcutaneous Matrigel angiogenesis model, established in type 1 diabetic rats. Methods. Ang-1 adenoviral vector was constructed. The rat model was established by STZ and divided into four group. The Matrigel was inserted subcutaneously into the abdominal cavity of rats at 8 weeks, the treatment group was injected with Ang-1 adenovirus vector via tail vein, and the rats were sacrificed at 10 weeks. Neovascularization of Matrigel was observed with transmission electron microscopy. The marker of vascular endothelial cell and pericyte were detected by immunofluorescence. Immunohistochemical detection of the neovascular endothelial junction protein was performed. RT-PCR was used to determine protein expression of neovascular in Matrigel. Results. Vascular cavity-like structure could be seen in subcutaneous Matrigel of diabetic rats, and the cavity was filled with a lot of red blood cells. Transmission electron microscopy showed that neovascular endothelial structure of the Matrigel was incomplete, while the Ang-1 treatment group had more vascular cavity-like structures, intact vascular endothelial structure, and reduced inflammatory cell infiltration in Matrigel. Additionally, the integrity of vascularization improved, and the marker of pericyte and the cell tight junctions protein was upregulated in Ang-1 treatment group. Conclusion. Hyperglycemia could induce pathological angiogenesis in subcutaneous Matrigel of diabetic rats, and Ang-1 could upregulate the expression of intercellular junction protein in subcutaneous Matrigel of diabetic rats and promote the integrity of neovascularization in the subcutaneous Matrigel of diabetic rats.

scholarly journals Thickening of T1 Precipitates during Aging of a High Purity Al–4Cu–1Li–0.25Mn Alloy

Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 30 ◽  
Author(s):  
Ines Häusler ◽  
Reza Kamachali ◽  
Walid Hetaba ◽  
Birgit Skrotzki
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Purity ◽  
External Load ◽  
Volume Fraction ◽  
Single Layer ◽  
Age Hardening ◽  
Defect Type ◽  
Transmission Electron

The age hardening response of a high-purity Al–4Cu–1Li–0.25Mn alloy (wt. %) during isothermal aging without and with an applied external load was investigated. Plate shaped nanometer size T1 (Al2CuLi) and θ′ (Al2Cu) hardening phases were formed. The precipitates were analyzed with respect to the development of their structure, size, number density, volume fraction and associated transformation strains by conducting transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) studies in combination with geometrical phase analysis (GPA). Special attention was paid to the thickening of T1 phase. Two elementary types of single-layer T1 precipitate, one with a Li-rich (Type 1) and another with an Al-rich (Defect Type 1) central layer, were identified. The results show that the Defect Type 1 structure can act as a precursor for the Type 1 structure. The thickening of T1 precipitates occurs by alternative stacking of these two elementary structures. The thickening mechanism was analyzed based on the magnitude of strain associated with the precipitation transformation normal to its habit plane. Long-term aging and aging under load resulted in thicker and structurally defected T1 precipitates. Several types of defected precipitates were characterized and discussed. For θ′ precipitates, a ledge mechanism of thickening was observed. Compared to the normal aging, an external load applied to the peak aged state leads to small variations in the average sizes and volume fractions of the precipitates.

scholarly journals Morphological and Ultrastructural Characterization of Antennal Sensilla and the Detection of Floral Scent Volatiles in Eupeodes corollae (Diptera: Syrphidae)

2021 ◽  
Vol 15 ◽  
Author(s):  
Wan-Ying Dong ◽  
Bing Wang ◽  
Gui-Rong Wang
Keyword(s):  
Electron Microscopy ◽  
Floral Scent ◽  
Sensory Cells ◽  
Ultrastructural Organization ◽  
Antennal Sensilla ◽  
Olfactory Sensilla ◽  
Sensilla Basiconica ◽  
Sensilla Trichodea ◽  
Transmission Electron ◽  
Olfactory Organs

The olfactory sensing system of the syrphid fly Eupeodes corollae is essential in pollination and prey localization, but little is known about the ultrastructural organization of their olfactory organs. In this study, the morphology, distribution, and ultrastructural organization of antennal sensilla of E. corollae in both sexes were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Neuronal responses of a subtype of sensilla basiconica to floral scent compounds were recorded by single sensillum recording (SSR). Ten morphological types, including Böhm bristles, sensilla chaetica, microtrichiae, sensilla trichodea, sensilla basiconica, sensilla clavate, sensilla coeloconica, sensilla styloconica, sensilla placodea, and sensory pit, were identified. Except for Böhm bristles and sensilla chaetica, which were distributed on the scape and pedicel of E. corollae antennae, innervated sensilla were densely distributed on the flagellum, a vital sensory organ. Further, observing ultrastructural organization showed that the sensilla trichodea, basiconica, and clavate are single-walled with multiple nanoscale pores perforating the cuticle. Sensilla coeloconica are double-walled and have no wall pores, but instead, have longitudinal grooves along with the pegs. Sensilla chaetica, Böhm bristles, and microtrichiae did not have wall pores on the cuticle or sensory cells at the base. The SSR results indicated that neuron B housed in the subtype of sensilla basiconica I (SBI) mainly responded to methyl eugenol and other aromatic compounds. Overall, our results provide valuable information to understand the morphology and ultrastructure of antennal sensilla from E. corollae. These findings are beneficial for the studies of the neuronal function map of olfactory sensilla and for determining evolutionary relationships in Diptera.

Techniques for Transmission Electron Microscopy of Fiber-Matrix Interfaces in Aluminum Alloy-Boron Composites by Ion Erosio

1971 ◽  
Vol 29 ◽  
pp. 204-205
Author(s):  
G. G. Shaw
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Aluminum Alloy ◽  
Electron Beam ◽  
Pure Aluminum ◽  
Ion Milling ◽  
Transmission Electron ◽  
Fiber Matrix ◽  
Ion Erosion ◽  
Row Of Fibers

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.

Direct Observation of Heat Exchanger Deposits by Cross Sectioning

1967 ◽  
Vol 25 ◽  
pp. 364-365
Author(s):  
R. W. Anderson ◽  
D. L. Senecal
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Heat Exchanger ◽  
Direct Observation ◽  
Cross Sections ◽  
Preparation Method ◽  
Specimen Preparation ◽  
Flowing Water ◽  
Transmission Electron ◽  
Deposit Layer

A problem was presented to observe the packing densities of deposits of sub-micron corrosion product particles. The deposits were 5-100 mils thick and had formed on the inside surfaces of 3/8 inch diameter Zircaloy-2 heat exchanger tubes. The particles were iron oxides deposited from flowing water and consequently were only weakly bonded. Particular care was required during handling to preserve the original formations of the deposits. The specimen preparation method described below allowed direct observation of cross sections of the deposit layers by transmission electron microscopy.The specimens were short sections of the tubes (about 3 inches long) that were carefully cut from the systems. The insides of the tube sections were first coated with a thin layer of a fluid epoxy resin by dipping. This coating served to impregnate the deposit layer as well as to protect the layer if subsequent handling were required.

Phase Transformations in Ti-7w/oMo-3w/oMe Alloy

1974 ◽  
Vol 32 ◽  
pp. 514-515
Author(s):  
S. Fujishiro
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Transmission Electron Microscopy ◽  
Tensile Strength ◽  
Mechanical Processing ◽  
Ray Method ◽  
X Ray ◽  
Transmission Electron ◽  
Water Quench ◽  
Alpha Beta

The mechanical properties of three titanium alloys (Ti-7Mo-3Al, Ti-7Mo- 3Cu and Ti-7Mo-3Ta) were evaluated as function of: 1) Solutionizing in the beta field and aging, 2) Thermal Mechanical Processing in the beta field and aging, 3) Solutionizing in the alpha + beta field and aging. The samples were isothermally aged in the temperature range 300° to 700*C for 4 to 24 hours, followed by a water quench. Transmission electron microscopy and X-ray method were used to identify the phase formed. All three alloys solutionized at 1050°C (beta field) transformed to martensitic alpha (alpha prime) upon being water quenched. Despite this heavily strained alpha prime, which is characterized by microtwins the tensile strength of the as-quenched alloys is relatively low and the elongation is as high as 30%.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Sign in / Sign up

Export Citation Format

Share Document