scholarly journals QUALITY CONTROL IN ECHOCARDIOGRAPHY REPORTING (PART A)

2022 ◽  
Vol 54 (4) ◽  
pp. 292-299
Author(s):  
Imran Hameed
Keyword(s):  
Quality Control ◽  
High Resolution ◽  
Learning Curve ◽  
Preliminary Data ◽  
Low Cost ◽  
Strain Analysis ◽  
3 Dimensional ◽  
Standardized Report ◽  
Cardiac Evaluation ◽  
Line Analysis

For cardiac evaluation echocardiography is of immense importance. Easy availability, low cost, and portability lands it in the hands of novices at times. It has a learning curve and expertise must be obtained to keep the standard of reports high and reliable. The referring physician must be fully conversant with the indications of echocardiography. The echocardiographic machine should deliver images of high resolution and fully equipped with all the basic modalities. Availability of 3D (3-dimensional) imaging, tissue synchronization imaging and strain analysis are added advantages. Preliminary data of patient must be collected and the study should be recorded for off-line analysis. Finally, the findings should be narrated on a proforma in the form of a standardized report showing all the relevant features, especially directed to the query of referring physician, thus completing the loop.

Lithography Process Optimization for 3D and 2.5D Applications

2013 ◽  
Vol 2013 (1) ◽  
pp. 000790-000793 ◽  
Author(s):  
Doug Shelton ◽  
Tomii Kume
Keyword(s):  
High Resolution ◽  
Process Optimization ◽  
Preliminary Data ◽  
Mass Production ◽  
Low Cost ◽  
High Density ◽  
Through Silicon Via ◽  
Key Technology ◽  
Lithography Process ◽  
Advanced Packaging

Lithography process optimization is a key technology enabling mass production of high-density interconnects using 3D and 2.5D technologies. In this paper, Canon continues its investigation of lithography optimization of thick-resist profiles and overlay accuracy to increase process margins for Through-Silicon Via (TSV) and Redistribution Layer (RDL) applications. Canon will also provide updates on the FPA-5510iV and FPA-5510iZ i-line steppers that are gaining acceptance as high-resolution, and low-cost lithography solutions for aggressive advanced packaging, 3D and 2.5D applications also preliminary data illustrating 450 mm wafer process challenges.

High resolution spot scan imaging of frozen, hydrated actin bundles with 400kV electrons

1992 ◽  
Vol 50 (1) ◽  
pp. 512-513
Author(s):  
J. Jakana ◽  
M.F. Schmid ◽  
P. Matsudaira ◽  
W. Chiu
Keyword(s):  
High Resolution ◽  
Binding Proteins ◽  
Actin Binding ◽  
Eukaryotic Cells ◽  
Dimensional Structure ◽  
Structural Basis ◽  
Actin Bundle ◽  
Actin Bundles ◽  
3 Dimensional ◽  
Macromolecular Assembly

Actin is a protein found in all eukaryotic cells. In its polymerized form, the cells use it for motility, cytokinesis and for cytoskeletal support. An example of this latter class is the actin bundle in the acrosomal process from the Limulus sperm. The different functions actin performs seem to arise from its interaction with the actin binding proteins. A 3-dimensional structure of this macromolecular assembly is essential to provide a structural basis for understanding this interaction in relationship to its development and functions.

scholarly journals Fabrication and Compressive Behavior of a Micro-Lattice Composite by High Resolution DLP Stereolithography

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 785
Author(s):  
Chow Shing Shin ◽  
Yu Chia Chang
Keyword(s):  
High Resolution ◽  
Lattice Structure ◽  
Low Cost ◽  
Hierarchical Structures ◽  
Dip Coating ◽  
Unit Cell ◽  
Digital Light Processing ◽  
Unit Cell Size ◽  
Wide Range ◽  
And Performance

Lattice structures are superior to stochastic foams in mechanical properties and are finding increasing applications. Their properties can be tailored in a wide range through adjusting the design and dimensions of the unit cell, changing the constituent materials as well as forming into hierarchical structures. In order to achieve more levels of hierarchy, the dimensions of the fundamental lattice have to be small enough. Although lattice size of several microns can be fabricated using the two-photon polymerization technique, sophisticated and costly equipment is required. To balance cost and performance, a low-cost high resolution micro-stereolithographic system has been developed in this work based on a commercial digital light processing (DLP) projector. Unit cell lengths as small as 100 μm have been successfully fabricated. Decreasing the unit cell size from 150 to 100 μm increased the compressive stiffness by 26%. Different pretreatments to facilitate the electroless plating of nickel on the lattice structure have been attempted. A pretreatment of dip coating in a graphene suspension is the most successful and increased the strength and stiffness by 5.3 and 3.6 times, respectively. Even a very light and incomplete nickel plating in the interior has increase the structural stiffness and strength by more than twofold.

scholarly journals Thermogravimetric Analysis (TGA) of Graphene Materials: Effect of Particle Size of Graphene, Graphene Oxide and Graphite on Thermal Parameters

2021 ◽  
Vol 7 (2) ◽  
pp. 41
Author(s):  
Farzaneh Farivar ◽  
Pei Lay Yap ◽  
Ramesh Udayashankar Karunagaran ◽  
Dusan Losic
Keyword(s):  
Particle Size ◽  
Quality Control ◽  
Graphene Oxide ◽  
Thermogravimetric Analysis ◽  
Low Cost ◽  
Thermal Parameters ◽  
Carbon Decomposition ◽  
Size Number ◽  
Carbon Combustion ◽  
Oxygen Groups

Thermogravimetric analysis (TGA) has been recognized as a simple and reliable analytical tool for characterization of industrially manufactured graphene powders. Thermal properties of graphene are dependent on many parameters such as particle size, number of layers, defects and presence of oxygen groups to improve the reliability of this method for quality control of graphene materials, therefore it is important to explore the influence of these parameters. This paper presents a comprehensive TGA study to determine the influence of different particle size of the three key materials including graphene, graphene oxide and graphite on their thermal parameters such as carbon decomposition range and its temperature of maximum mass change rate (Tmax). Results showed that Tmax values derived from the TGA-DTG carbon combustion peaks of these materials increasing from GO (558–616 °C), to graphene (659–713 °C) and followed by graphite (841–949 °C) The Tmax values derived from their respective DTG carbon combustion peaks increased as their particle size increased (28.6–120.2 µm for GO, 7.6–73.4 for graphene and 24.2–148.8 µm for graphite). The linear relationship between the Tmax values and the particle size of graphene and their key impurities (graphite and GO) confirmed in this study endows the use of TGA technique with more confidence to evaluate bulk graphene-related materials (GRMs) at low-cost, rapid, reliable and simple diagnostic tool for improved quality control of industrially manufactured GRMs including detection of “fake” graphene.

3-Dimensional Characterization of Polycrystalline Bulk Materials Using High-Energy Synchrotron Radiation

2007 ◽  
Vol 539-543 ◽  
pp. 2353-2358 ◽  
Author(s):  
Ulrich Lienert ◽  
Jonathan Almer ◽  
Bo Jakobsen ◽  
Wolfgang Pantleon ◽  
Henning Friis Poulsen ◽  
...  
Keyword(s):  
High Resolution ◽  
Synchrotron Radiation ◽  
High Energy ◽  
Mapping Technique ◽  
X Ray Diffraction ◽  
Bulk Materials ◽  
Reciprocal Space Mapping ◽  
3 Dimensional ◽  
Individual Grains

The implementation of 3-Dimensional X-Ray Diffraction (3DXRD) Microscopy at the Advanced Photon Source is described. The technique enables the non-destructive structural characterization of polycrystalline bulk materials and is therefore suitable for in situ studies during thermo-mechanical processing. High energy synchrotron radiation and area detectors are employed. First, a forward modeling approach for the reconstruction of grain boundaries from high resolution diffraction images is described. Second, a high resolution reciprocal space mapping technique of individual grains is presented.

A HIGH-RESOLUTION 2D IMAGING LASER RADAR FOR OCCLUDED HARD TARGET VIEWING AND IDENTIFICATION

2008 ◽  
Vol 18 (02) ◽  
pp. 393-400 ◽  
Author(s):  
ROBERT J. GRASSO ◽  
JOHN C. WIKMAN ◽  
DAVID P. DROUIN ◽  
GEORGE F. DIPPEL ◽  
PAUL I. EGBERT
Keyword(s):  
High Resolution ◽  
Target Identification ◽  
Low Cost ◽  
System Size ◽  
Operating Conditions ◽  
Array Technology ◽  
Diode Pumped ◽  
Target Ranging ◽  
2D Imaging ◽  
Gated Imaging

BAE SYSTEMS has developed a Low Cost Targeting System (LCTS) consisting of a FLIR for target detection, laser-illuminated, gated imaging for target identification, laser rangefinder and designator, GPS positioning, and auto-tracking capability within a small compact system size. The system is based upon BAE Systems proven micro-bolometer passive LWIR camera coupled with Intevac's new EBAPS camera. A dual wavelength diode pumped laser provides eyesafe ranging and target illumination, as well as designation; a custom detector module senses the return pulse for target ranging and to set the range gates for the gated camera. Trials show that the current detectors offer complete extinction of signals outside of the gated range, thus, providing high resolution within the gated region. The images have shown high spatial resolution arising from the use of solid state focal plane array technology. Imagery has been collected in both the laboratory and the field to verify system performance during a variety of operating conditions.

High-Resolution Monitoring of Atmospheric Pollutants Using a System of Low-Cost Sensors

2014 ◽  
Vol 52 (7) ◽  
pp. 3823-3832 ◽  
Author(s):  
Sutharshan Rajasegarar ◽  
Timothy C. Havens ◽  
Shanika Karunasekera ◽  
Christopher Leckie ◽  
James C. Bezdek ◽  
...  
Keyword(s):  
High Resolution ◽  
Low Cost ◽  
Atmospheric Pollutants

scholarly journals High-Resolution Atmospheric Sensing of Multiple Atmospheric Variables Using the DataHawk Small Airborne Measurement System

2013 ◽  
Vol 30 (10) ◽  
pp. 2352-2366 ◽  
Author(s):  
Dale A. Lawrence ◽  
Ben B. Balsley
Keyword(s):  
High Resolution ◽  
Measurement System ◽  
Current System ◽  
Low Cost ◽  
Structure Constant ◽  
Turbulence Structure ◽  
Quality Of Data ◽  
Airborne Measurement ◽  
Atmospheric Measurement ◽  
Atmospheric Variables

Abstract The DataHawk small airborne measurement system provides in situ atmospheric measurement capabilities for documenting scales as small as 1 m and can access reasonably large volumes in and above the atmospheric boundary layer at low cost. The design of the DataHawk system is described, beginning with the atmospheric measurement requirements, and articulating five key challenges that any practical measurement system must overcome. The resulting characteristics of the airborne and ground support components of the DataHawk system are outlined, along with its deployment, operating, and recovery modes. Typical results are presented to illustrate the types and quality of data provided by the current system, as well as the need for more of these finescale measurements. Particular focus is given to the DataHawk's ability to make very-high-resolution measurements of a variety of atmospheric variables simultaneously, with emphasis given to the measurement of two important finescale turbulence parameters, (the temperature turbulence structure constant) and ɛ (the turbulent energy dissipation rate). Future sensing possibilities and limitations using this approach are also discussed.

Sign in / Sign up

Export Citation Format

Share Document