scholarly journals Analysis of capabilities of fiber separation in the existing parameters of the teeth profile of a disc saw

2021 ◽  
Vol 1 (4) ◽  
pp. 55-61
Author(s):  
Akbar Abrorov ◽  
Orzumurod Ikromov
Keyword(s):  
Cotton Fiber ◽  
Impact Force ◽  
Fiber Separation ◽  
Working Parameters ◽  
The Impact

The article covers the gripping capabilities of cotton fiber by tooth profiles of the disc saw. The working parameters between the teeth have been determined. The process of impact of cottonseeds on the saw teeth has been studied, as well as the regularity of the effect of the impact force on the saw tooth and on the indicators of the hardness of the seed shell have been determined.

Some thought on the Estimating of the Impact Force by an Experiment

2019 ◽  
Vol 7 (2) ◽  
pp. 205-213
Author(s):  
Yong-Doo Kim ◽  
Seung-Jae Lim ◽  
Hyun-Ung Bae ◽  
Kyoung-Ju Kim ◽  
Chin-Ok Lee ◽  
...  
Keyword(s):  
Impact Force ◽  
The Impact

scholarly journals Sandwich panel with in-plane honeycombs in different Poisson's ratio under low to medium impact loads

2021 ◽  
Vol 60 (1) ◽  
pp. 145-157
Author(s):  
Yi Luo ◽  
Ke Yuan ◽  
Lumin Shen ◽  
Jiefu Liu
Keyword(s):  
Poisson’S Ratio ◽  
Sandwich Panel ◽  
Impact Force ◽  
Impact Resistance ◽  
Poisson's Ratio ◽  
Compression Performance ◽  
Post Impact ◽  
Local Impact ◽  
Collapse Behavior ◽  
The Impact

Abstract In this study, a series of in-plane hexagonal honeycombs with different Poisson's ratio induced by topological diversity are studied, considering re-entrant, semi-re-entrant and convex cells, respectively. The crushing strength of honeycomb in terms of Poisson's ratio is firstly presented. In the previous research, we have studied the compression performance of honeycomb with different negative Poisson's ratio. In this study, a comparative study on the local impact resistance of different sandwich panels is conducted by considering a spherical projectile with low to medium impact speed. Some critical criteria (i.e. local indentation profile, global deflection, impact force and energy absorption) are adopted to analyze the impact resistance. Finally, an influential mechanism of Poisson's ratio on the local impact resistance of sandwich panel is studied by considering the variation of core strength and post-impact collapse behavior.

Pre-Impact Configuration Designing of a Robot Manipulator for Impact Minimization

2017 ◽  
Vol 9 (3) ◽  
Author(s):  
Jingchen Hu ◽  
Tianshu Wang
Keyword(s):  
Impact Force ◽  
Robot Manipulator ◽  
Analytical Formula ◽  
Joint Space ◽  
Collision Problem ◽  
Spatial Operator ◽  
Inertia Ellipsoid ◽  
The Impact ◽  
Maximum Minimum ◽  
Simple Analytical Formula

This paper studies the collision problem of a robot manipulator and presents a method to minimize the impact force by pre-impact configuration designing. First, a general dynamic model of a robot manipulator capturing a target is established by spatial operator algebra (SOA) and a simple analytical formula of the impact force is obtained. Compared with former models proposed in literatures, this model has simpler form, wider range of applications, O(n) computation complexity, and the system Jacobian matrix can be provided as a production of the configuration matrix and the joint matrix. Second, this work utilizes the impulse ellipsoid to analyze the influence of the pre-impact configuration and the impact direction on the impact force. To illustrate the inertia message of each body in the joint space, a new concept of inertia quasi-ellipsoid (IQE) is introduced. We find that the impulse ellipsoid is constituted of the inertia ellipsoids of the robot manipulator and the target, while each inertia ellipsoid is composed of a series of inertia quasi-ellipsoids. When all inertia quasi-ellipsoids exhibit maximum (minimum) coupling, the impulse ellipsoid should be the flattest (roundest). Finally, this paper provides the analytical expression of the impulse ellipsoid, and the eigenvalues and eigenvectors are used as measurements to illustrate the size and direction of the impulse ellipsoid. With this measurement, the desired pre-impact configuration and the impact direction with minimum impact force can be easily solved. The validity and efficiency of this method are verified by a PUMA robot and a spatial robot.

Study on Impact Compaction of Aeolian Sand Subgrade and its Effect Evaluation

2011 ◽  
Vol 378-379 ◽  
pp. 370-373
Author(s):  
Yu Qing Yuan ◽  
Xuan Cang Wang ◽  
Hui Jun Shao
Keyword(s):  
Rayleigh Wave ◽  
Impact Force ◽  
Engineering Practice ◽  
Effect Evaluation ◽  
Aeolian Sand ◽  
Field Compaction ◽  
Vibratory Compaction ◽  
Strength And Stiffness ◽  
The Impact ◽  
Elastic Stage

In order to solve the problem of aeolian sand subgrade compaction, we studied the technology of impact compaction, applied it to the engineering practice and analyzed its effect with Rayleigh wave. The technology of impact compaction can combine the compaction of potential energy and kinetic energy and make it easier for the materials to reach their elastic stage. With the combined function of "knead-roll-impact", the impact compaction road roller can compact the soil body and offer 6～10 times impact force and 3～4 times the depth of influence more than the vibratory roller. The impact compaction methods of aeolian sand subgrade were put forward. The comparative field compaction tests between impact and vibratory compaction are carried through, which are detected by Rayleigh wave. The results show that the impact compaction can make the density of the aeolian sand subgrade 2～5% higher than the vibratory compaction, and reach the influence depth of 7 metres. To sum up, the impact compaction can clearly increases the strength and stiffness of aeolian sand subgrade with a dynamic elastic modulus of 202.63MPa.

Design and simulation analysis of impact-resistant flexible drill pipe for rock-breaking rig

2021 ◽  
pp. 095745652110307
Author(s):  
Kangping Gao ◽  
Xinxin Xu ◽  
Ning Shi ◽  
Shengjie Jiao
Keyword(s):  
Impact Force ◽  
Drill Pipe ◽  
Rock Breaking ◽  
Control Model ◽  
Simulation Software ◽  
System Stability ◽  
Series Elastic Actuator ◽  
Pipe Model ◽  
The Impact ◽  
Series Elastic

In the process of drilling and coring by the rock-breaking rig, the drill rod is affected by the intermittent impact force, which reduces the efficiency of the rig to break the rock and increases the cost of the drilling and coring. Therefore, it is very important to improve the impact resistance of the drill pipe during the rock-breaking process. To achieve this goal, a flexible design of the drill pipe was carried out, and a dynamical model of the drilling rig based on a series elastic actuator was established. Considering the dynamic performance of the system, a torque feedforward link is introduced and a control model based on the force source is established. The influence of the equivalent inertia of the transmission system and the series elastic actuator damping coefficient on the system stability was analyzed by drawing the frequency domain characteristic curve of the system. By using the control and Simulink simulation software, the electromechanical simulation of the model is carried out, and the torque step tracking response of the system is obtained. A torque feedforward link is introduced to establish the control model of the system based on force source. Through dynamic simulation software ADAMS, dynamic and static impact simulation experiments were carried out on the system. The results show that when a force of 200 N is applied to the output end of the drill pipe in the tangential direction, the maximum moments received by the joint under static and dynamic environments are 34.1 N·m and 57.9 N·m, respectively. When the impact force disappears, the time required for the flexible drill pipe to reach a stable state is only 0.15 s, which verifies that the series elastic actuator–based drill pipe model can alleviate the impact of the external environment and protect the internal structure of the rig.

The Effects of Upstream Flexible Barrier on the Debris Flow Entrainment and Impact Dynamics on a Terminal Barrier

2021 ◽  
Author(s):  
Hervé Vicari ◽  
C.W.W. Ng ◽  
Steinar Nordal ◽  
Vikas Thakur ◽  
W.A. Roanga K. De Silva ◽  
...  
Keyword(s):  
Debris Flow ◽  
Debris Flows ◽  
Impact Force ◽  
Dynamic Pressure ◽  
Pressure Coefficient ◽  
Flexible Barrier ◽  
Impact Forces ◽  
Flexible Barriers ◽  
The Impact ◽  
Bed Entrainment

The destructive nature of debris flows is mainly caused by flow bulking from entrainment of an erodible channel bed. To arrest these flows, multiple flexible barriers are commonly installed along the predicted flow path. Despite the importance of an erodible bed, its effects are generally ignored when designing barriers. In this study, three unique experiments were carried out in a 28 m-long flume to investigate the impact of a debris flow on both single and dual flexible barriers installed in a channel with a 6 m-long erodible soil bed. Initial debris volumes of 2.5 m<sup>3</sup> and 6 m<sup>3</sup> were modelled. For the test setting adopted, a small upstream flexible barrier before the erodible bed separates the flow into several surges via overflow. The smaller surges reduce bed entrainment by 70% and impact force on the terminal barrier by 94% compared to the case without an upstream flexible barrier. However, debris overflowing the deformed flexible upstream barrier induces a centrifugal force that results in a dynamic pressure coefficient that is up to 2.2 times higher than those recommended in guidelines. This suggests that although compact upstream flexible barriers can be effective for controlling bed entrainment, they should be carefully designed to withstand higher impact forces.

scholarly journals Effects of dynamic fragmentation on the impact force exerted on rigid barrier: centrifuge modelling

2019 ◽  
Vol 56 (9) ◽  
pp. 1215-1224 ◽  
Author(s):  
C.W.W. Ng ◽  
C.E. Choi ◽  
D.K.H. Cheung ◽  
Y. Cui
Keyword(s):  
Volume Fraction ◽  
Impact Force ◽  
Inertial Particles ◽  
Size Segregation ◽  
Centrifuge Modelling ◽  
Rigid Barrier ◽  
Flow Energy ◽  
Dynamic Fragmentation ◽  
Large Particles ◽  
The Impact

Bi-dispersity is a prerequisite for grain-size segregation, which transports the largest particles to the flow front. These large and inertial particles can fragment upon impacting a barrier. The amount of fragmentation during impact strongly influences the force exerted on a rigid barrier. Centrifuge modelling was adopted to replicate the stresses for studying the effects of bi-dispersity in a granular assembly and dynamic fragmentation on the impact force exerted on a model rigid barrier. To study the effects of bi-dispersity, the ratio between the diameters of small and large particles (δs/δl), characterizing the particle-size distribution (PSD), was varied as 0.08, 0.26, and 0.56. The volume fraction of the large particles was kept constant. A δs/δl tending towards unity characterizes inertial flow that exerts sharp impulses, and a diminishing δs/δl characterizes the progressive attenuation of these sharp impulses by the small particles. Flows dominated by grain-contact stresses (δs/δl < 0.26), as characterized by the Savage number, are effective at attenuating dispersive stresses of the large particles, which are responsible for reducing dynamic fragmentation. By contrast, flows dominated by grain-inertial stresses (δs/δl > 0.26) exhibit up to 66% more impulses and 4.3 times more fragmentation. Dynamic fragmentation of bi-disperse flows impacting a rigid barrier can dissipate about 30% of the total flow energy.

Sign in / Sign up

Export Citation Format

Share Document