scholarly journals Elaboration and Physico-Chemical Characterization of the Gibbsite Li(OH)3 Hybrid Material

2021 ◽  
Vol 11 (1) ◽  
pp. 6740-6744
Author(s):  
N. el H. Belkham ◽  
D. Benachour ◽  
A. Mehamha

A hybrid material can be defined as a combination of two components of different chemical nature. The combination of a mineral matrix and organic matter has multiple significance. From a chemical point of view, it allows the obtaining of bi-functional materials that combine the chemical properties of their components. The development of new materials with specific properties and nanostructured Lamellar Double Hydroxides (LDHs) has been widely investigated due to their great importance. This study focuses on the development of a hybrid material consisting of a matrix of alumina trihydrate Al(OH)3 (gibbsite). Previous studies on the synthesis of suspension LDHs by lithium salts intercalation in a gibbsite matrix were examined, while the obtained samples were characterized by different physicochemical methods.

2001 ◽  
Vol 71 (3) ◽  
pp. 342-349
Author(s):  
Lucian Eva ◽  
Letitia Doina Duceac ◽  
Liviu Stafie ◽  
Constantin Marcu ◽  
Geta Mitrea ◽  
...  

The fourth generation cephalosporin antibacterial agent, cefepime, was loaded into layered double hydroxides for enhancing antibiotic efficiency, reducing side effects, as well as achieving the sustained release property. The intercalation of antibiotic into the inter-gallery of ZnAl-layered double hydroxide (LDH) was carried out using ion exchange method, by this constituting a nano-sized organic-inorganic hybrid material for a controlled release novel formulation. Although cefepime is a broad spectrum antibiotic, it has various adverse effects and a significant degradation rate. Thus, the preparation and physico-chemical characterization of nanomaterials able to intercalate this drug is an important study for medical and pharmaceutical field. The antibiotic inclusion into LDHs nanostructure was confirmed by advanced characterization techniques and the release profile of cefepime was analysed with the respect to pH of the simulated media.


Foods ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 2103
Author(s):  
Saša Prđun ◽  
Lidija Svečnjak ◽  
Mato Valentić ◽  
Zvonimir Marijanović ◽  
Igor Jerković

Chemical characterization of bee pollen is of great importance for its quality estimation. Multifloral and unifloral bee pollen samples collected from continental, mountain and Adriatic regions of Croatia were analyzed by means of physico-chemical, chromatographic (GC-MS), and spectroscopic (FTIR-ATR) analytical tools, aiming to conduct a comprehensive characterization of bee pollen. The most distinctive unifloral bee pollen with regard to nutritional value was Aesculus hippocastanum (27.26% of proteins), Quercus spp. (52.58% of total sugars), Taraxacumofficinale (19.04% of total lipids), and Prunusavium (3.81% of ash). No statistically significant differences between multifloral and unifloral bee pollen from different regions were found for most of the physico-chemical measurement data, with an exception of melezitose (p = 0.04). Remarkable differences were found among the bee pollen HS VOCs. The major ones were lower aliphatic compounds, monoterpenes (mainly linalool derivatives, especially in Prunusmahaleb and P.avium bee pollen), and benzene derivatives (mainly benzaldehyde in T.officinale and Salix spp.). Aldehydes C9 to C17 were present in almost all samples. FTIR-ATR analysis revealed unique spectral profiles of analyzed bee pollen exhibiting its overall chemical composition arising from molecular vibrations related to major macromolecules—proteins, lipids, and carbohydrates (sugars).


2016 ◽  
Vol 13 (2) ◽  
pp. 197-206
Author(s):  
PR Sheel ◽  
MAH Chowdhury ◽  
M Ali ◽  
MA Mahamud

The soil physico-chemical properties have been disturbed due to long continued intensive agricultural practices. Under this situation we are approaching rapidly to a very strong future challenge in sustaining the quality of our soil. This study was conducted to evaluate the physico-chemical properties of the selected soil series. The area covered Mymensingh and Jamalpur districts of Bangladesh. Soil samples were collected randomly from different profiles of Lokdeo, Tarakanda, Silmondi and Melandah soil series during March-May, 2014 and analysed. All soils were acidic and textural classes were sandy loam, silt loam, loam, and clay loam. Organic matter and total N contents low to very low. Available S content in the upper layers of most soils were medium to optimum and in the deeper layer low to medium. The exchangeable K, Ca and Na contents were also low. The upper layers of all the locations contained higher amounts of available Zn. The available Cu and Fe contents of most soils were very high. The soils of all locations contained very high amount of available Mn except the deeper layers (45-75 cm) of Melandah which contained optimum amount of available Mn. Soil pH showed negative correlation with total N and available S. Total N showed positive correlation with soil OM, available Cu and available S. There was positive correlation between available S and available Mn.J. Bangladesh Agril. Univ. 13(2): 197-206, December 2015


Author(s):  
Olufunso O. Abosede

Abstract: In the recent past, the pharmaceutical modification of drug molecules by complexation with biologically relevant metals to improve their properties such as stability, dissolution rate, absorption and bioavailability has been extensively studied. In order to achieve better and enhanced medicinal activity, vanadyl complexes of the widely used lincomycin (Lin-van) and neomycin (Neo-van) have been synthesized and their physico-chemical properties examined. The UV-Vis absorption properties of these complexes were determined and their antimicrobial activities were tested against some pathogenic organisms viz: Proteus vulgaris, Klebsiella pneumonae, Escherichia coli and Staphylococcus aureus. In all cases, Neo-van showed better antimicrobial activity than Lin-van while both complexes showed better activity than the antibiotic lincomycin and the previously reported Cu-Lin. Keywords: lincomycin, neomycin, UV-Vis spectroscopy, Physico-chemical, Oxovanadyl, synthesis


2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Arif Ali Baig Moghal

In order to explore the possibility of using low-lime fly ashes, the physical and chemical properties which have a direct bearing on their geotechnical and geoenvironmental behaviors have been investigated. In this paper, two types of low-lime fly ashes, originating from India, have been used. A brief account of various methods adopted in characterizing their physical, chemical, and geotechnical properties is presented. The relative importance of each of these properties in enhancing the bulk applicability of fly ashes has been brought out.


2008 ◽  
Vol 59 (2) ◽  
pp. 165-167
Author(s):  
Mihaela Frunza ◽  
Gabriela Lisa ◽  
Marcel Ionel Popa

The paper presents the tailoring synthesis and physico-chemical characterization of layered double hydroxides (LDH) intercalated with 4,6-dinitro-o-cresol (DNOC) by coprecipitation method. The X-ray diffraction (DRX), Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric (TG -DTG) analysis point out the presence of the organic compound in the network structure of the synthesized materials. Considering together the pesticide activity of 4,6-dinitro-o-cresol and the biocompatibility of the layered double hydroxides the new synthesized materials could open interesting perspectives for obtaining more environmentally friendly insecticides.


2007 ◽  
Vol 64 (1) ◽  
pp. 19-22 ◽  
Author(s):  
Silvia Antoniali ◽  
Paulo Ademar Martins Leal ◽  
Ana Maria de Magalhães ◽  
Rogério Tsuyoshi Fuziki ◽  
Juliana Sanches

The bell pepper presents alterations in its composition and its properties with the process of senescence during ripening. These composition and textual factors are part of the quality of the fruit and therefore of the selection. This permits the correct knowledge of the factors necessary for post-harvest measures, so that they can be adequately applied. The aim of this study is to analyze the 'Zarco HS' yellow pepper at various levels of ripeness taking into account its physico-chemical properties (titratable acidity, pH, total soluble solids, water content, and ascorbic acid), in order to understand this behavior during the ripening process. Bell peppers were separated based on their yellow percentage, which varied from 0% to 100%, and for each percentage five fruits were chosen as replicates. They were compared to 0%, 25%, 50%, 75% and 100% levels of ripening, due to the difficulty of the methodology in identifying the smaller differences between coloring. The 'Zarco HS' yellow bell pepper presents greater levels of soluble solids and lower levels of malic acid as the percentage of external yellow coloring increases. The yellow bell peppers, especially when totally yellow, represent an important source of vitamin C.


Alergologia ◽  
2020 ◽  
Vol 1 (4) ◽  
pp. 7
Author(s):  
Mariana Vieru ◽  
Florin-Dan Popescu ◽  
Laura Haidar ◽  
Carmen Bunu-Panaitescu

Sign in / Sign up

Export Citation Format

Share Document