scholarly journals Turbulent and non-turbulent exchange of scalars between the forest and the atmosphere at night in Amazonia

2017 ◽  
Author(s):  
Pablo E. S. Oliveira ◽  
Otávio C. Acevedo ◽  
Matthias Sörgel ◽  
Anywhere Tsokankunku ◽  
Stefan Wolff ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Low Frequency ◽  
Amazon Forest ◽  
Turbulent Transfer ◽  
Stable Regime ◽  
Stable Conditions ◽  
Weakly Stable ◽  
The Stability ◽  
The Relationship ◽  
Temporal Windows

Abstract. Nocturnal turbulent kinetic energy (TKE) and fluxes of energy, CO2 and O3 between the Amazon forest and the atmosphere are evaluated for a 20-day campaign at the Amazon Tall Tower Observatory (ATTO) site. The distinction of these quantities between fully turbulent (weakly stable) and intermittent (very stable) nights is discussed. Spectral analysis indicates that low-frequency, non-turbulent fluctuations are responsible for a large portion of the variability observed on intermittent nights. In these conditions, the low-frequency exchange may dominate over the turbulent transfer. In particular, we show that within the canopy most of the exchange of CO2 and H2O happens on temporal scales longer than 100 s. At 80 m, on the other hand, the turbulent fluxes are almost absent in such very stable conditions, suggesting a boundary layer shallower than 80 m. The relationship between TKE and mean winds shows that the stable boundary layer switches from the very stable to the weakly stable regime during intermittent bursts of turbulence. In general, fluxes estimated with long temporal windows that account for the low-frequency effects are more dependent on the stability over a deeper layer above the forest than they are on the stability between the top of the canopy and its interior, suggesting that low-frequency processes are controlled over a deeper layer above the forest.

scholarly journals Nighttime wind and scalar variability within and above an Amazonian canopy

2018 ◽  
Vol 18 (5) ◽  
pp. 3083-3099 ◽  
Author(s):  
Pablo E. S. Oliveira ◽  
Otávio C. Acevedo ◽  
Matthias Sörgel ◽  
Anywhere Tsokankunku ◽  
Stefan Wolff ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Low Frequency ◽  
Amazon Forest ◽  
Stable Regime ◽  
Stable Conditions ◽  
Weakly Stable ◽  
The Stability ◽  
The Relationship ◽  
Temporal Windows ◽  
Scalar Variability

Abstract. Nocturnal turbulent kinetic energy (TKE) and fluxes of energy, CO2 and O3 between the Amazon forest and the atmosphere are evaluated for a 20-day campaign at the Amazon Tall Tower Observatory (ATTO) site. The distinction of these quantities between fully turbulent (weakly stable) and intermittent (very stable) nights is discussed. Spectral analysis indicates that low-frequency, nonturbulent fluctuations are responsible for a large portion of the variability observed on intermittent nights. In these conditions, the low-frequency exchange may dominate over the turbulent transfer. In particular, we show that within the canopy most of the exchange of CO2 and H2O happens on temporal scales longer than 100 s. At 80 m, on the other hand, the turbulent fluxes are almost absent in such very stable conditions, suggesting a boundary layer shallower than 80 m. The relationship between TKE and mean winds shows that the stable boundary layer switches from the very stable to the weakly stable regime during intermittent bursts of turbulence. In general, fluxes estimated with long temporal windows that account for low-frequency effects are more dependent on the stability over a deeper layer above the forest than they are on the stability between the top of the canopy and its interior, suggesting that low-frequency processes are controlled over a deeper layer above the forest.

scholarly journals Numerical Simulation of Coherent Structures in the Turbulent Boundary Layer under Different Stability Conditions

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1068
Author(s):  
Shujin Laima ◽  
Hehe Ren ◽  
Hui Li ◽  
Jinping Ou
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Correlation Coefficient ◽  
Wind Velocity ◽  
Coherent Structures ◽  
Stability Conditions ◽  
Velocity Spectrum ◽  
Turbulent Eddy ◽  
Stable Conditions ◽  
The Stability

Coherent structures in the turbulent boundary layer were investigated under different stability conditions. Qualitative analyses of the flow field, spatial correlation coefficient field and pre-multiplied wind velocity spectrum showed that the dominant turbulent eddy structure changed from small-scale motions to large- and very-large-scale motions and then to thermal plumes as the stability changed from strong stable to neutral and then to strong unstable. A quantitative analysis of the size characteristics of the three-dimensional turbulent eddy structure based on the spatial correlation coefficient field showed that under near-neutral stability, the streamwise, wall-normal and spanwise extents remained constant at approximately 0.3 δ , 0.1 δ and 0.2 δ ( δ , boundary layer height), respectively, while for other conditions, the extent in each direction varied in a log-linear manner with stability; only the spanwise extent under stable conditions was also independent of stability. The peak wavenumber of the pre-multiplied wind velocity spectrum moves towards small values from stable conditions to neutral condition and then to unstable conditions; thus, for the wind velocity spectrum, another form is needed that takes account the effects of the stability condition.

Micrometeorological Aspects of Spraying within a Surface Inversion.

2021 ◽  
Author(s):  
Warwick Grace ◽  
Graeme Tepper
Keyword(s):  
Heat Flux ◽  
Turbulent Mixing ◽  
Long Distance ◽  
Maximum Heat ◽  
Stable Case ◽  
Stable Regime ◽  
Stable Conditions ◽  
Order Of Magnitude ◽  
Weakly Stable ◽  
High Concentrations

AbstractPesticide applications during surface inversions can lead to spray drift causing severe damage up to several kilometers off-target. Current regulations in Australia prohibit spray application of certain agricultural chemicals when hazardous surface inversions exist. This severely limits spray opportunities.Surface inversions can be classified as weakly or strongly stable. In the weakly stable case, moderate to strong turbulent mixing is not supportive of long-distance concentrated drift. In the very stable case, weak turbulent mixing can support the transport of high concentrations of fine material over long distances. A review of the literature and our analyses indicate that if the turbulence, as measured by the standard deviation of the vertical wind speed σw, is greater than about 0.2 m/s then turbulence-driven mixing and dispersion is moderate to strong and conversely if σw is less than about 0.2 m/s then turbulence-driven mixing and dispersion is weaker (an order of magnitude). The concept of maximum downward heat flux as a natural division between the regimes is applied within Monin-Obukhov Stability Theory and it is shown that the observed mean σw of 0.2 m/s aligns with the ridge line of maximum heat flux in stable conditions. The level of turbulence in the weakly stable regime is comparable to the turbulence typically observed in near-neutral conditions which are recommended under current guidelines as suitable for spraying and is therefore seen as an acceptable prerequisite to avoid non-dispersive spraying conditions.

scholarly journals Observations of Stably Stratified Shear-Driven Atmospheric Turbulence at Low and High Richardson Numbers

2007 ◽  
Vol 64 (2) ◽  
pp. 645-655 ◽  
Author(s):  
Thorsten Mauritsen ◽  
Gunilla Svensson
Keyword(s):  
Velocity Field ◽  
Kinetic Energy ◽  
Potential Energy ◽  
Richardson Number ◽  
Stability Parameter ◽  
Stable Regime ◽  
Scalar Fluxes ◽  
Gradient Richardson Number ◽  
Weakly Stable ◽  
The Stability

Abstract Stably stratified shear-driven turbulence is analyzed using the gradient Richardson number, Ri, as the stability parameter. The method overcomes the statistical problems associated with the widely used Monin–Obukhov stability parameter. The results of the Ri-based scaling confirm the presence of three regimes: the weakly and the very stable regimes and the transition in between them. In the weakly stable regime, fluxes scale in proportion with variance, while in the very stable regime, stress and scalar fluxes behave differently. At large Ri, the velocity field becomes highly anisotropic and the turbulent potential energy becomes approximately equal to half of the turbulent kinetic energy. It appears that even in the strongly stable regime, beyond what is known as the critical gradient Richardson number, turbulent motions are present.

scholarly journals ANÁLISE DA PERFORMANCE DE UM MODELO DE COLUNA SIMPLES UTILIZANDO DIFERENTES PARAMETRIZAÇÕES PARA A TAXA DISSIPAÇÃO VISCOSA DE ENERGIA CINÉTICA TURBULENTA

2016 ◽  
Vol 38 ◽  
pp. 394
Author(s):  
Janete Gonçalves Lira ◽  
Eduardo Stüker ◽  
Jean Jonathan Schuster ◽  
Cristiano Henrique Schuster ◽  
Daniel Michelon dos Santos ◽  
...  
Keyword(s):  
Numerical Models ◽  
Atmospheric Flow ◽  
Stable Regime ◽  
Stable Conditions ◽  
Single Column ◽  
Weather And Climate ◽  
Single Column Model ◽  
Stable Atmospheric Boundary Layer ◽  
Weakly Stable ◽  
Turbulence Formulations

The proper description of the atmospheric flow in the stable atmospheric boundary layer is one of the most complex tasks to be performed by numerical models of weather and climate prediction. Most of the parameterizations used in these models are based on the statistical theory of turbulence in their conception. However, this theory is valid only for a flow in which turbulence is homogeneous, isotropic and stationary, a conditions that are not commonly found overnight. Basically, the nighttime flow can be classified in two major regimes: very stable, where turbulence is almost entirely suppressed; and weakly stable regime, with intense turbulent mixing. The transition between these regimes is known as atmospheric coupling, and it can happens a lot of times along the same night. In this work, we implemented a single column model with turbulence closure 1.5, in three different configurations and three different turbulence formulations. In general, the model results show that, all the configurations are able to reproduce the average characteristics of the flow in the weakly stable conditions.

Practical High Resolution Microscopy

1968 ◽  
Vol 26 ◽  
pp. 302-303
Author(s):  
P. A. Marsh ◽  
T. Mullens ◽  
D. Price
Keyword(s):  
High Resolution ◽  
Magnetic Fields ◽  
Low Frequency ◽  
Resolving Power ◽  
Careful Attention ◽  
Electron Microscopes ◽  
The Relationship ◽  
High Resolution Microscopy ◽  
New Facilities

It is possible to exceed the guaranteed resolution on most electron microscopes by careful attention to microscope parameters essential for high resolution work. While our experience is related to a Philips EM-200, we hope that some of these comments will apply to all electron microscopes.The first considerations are vibration and magnetic fields. These are usually measured at the pre-installation survey and must be within specifications. It has been our experience, however, that these factors can be greatly influenced by the new facilities and therefore must be rechecked after the installation is completed. The relationship between the resolving power of an EM-200 and the maximum tolerable low frequency interference fields in milli-Oerstedt is 10 Å - 1.9, 8 Å - 1.4, 6 Å - 0.8.

A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater: Part I

TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 20-26 ◽  
Author(s):  
PEEYUSH TRIPATHI ◽  
MARGARET JOYCE ◽  
PAUL D. FLEMING ◽  
MASAHIRO SUGIHARA
Keyword(s):  
Boundary Layer ◽  
Experimental Design ◽  
High Speed ◽  
Statistical Study ◽  
Process Variables ◽  
High Speeds ◽  
The Stability ◽  
Air Removal ◽  
Removal System

Using an experimental design approach, researchers altered process parameters and material prop-erties to stabilize the curtain of a pilot curtain coater at high speeds. Part I of this paper identifies the four significant variables that influence curtain stability. The boundary layer air removal system was critical to the stability of the curtain and base sheet roughness was found to be very important. A shear thinning coating rheology and higher curtain heights improved the curtain stability at high speeds. The sizing of the base sheet affected coverage and cur-tain stability because of its effect on base sheet wettability. The role of surfactant was inconclusive. Part II of this paper will report on further optimization of curtain stability with these four variables using a D-optimal partial-facto-rial design.

An Experimental Investigation on Thermal Conductivity and Viscosity of Graphene doped CNTs /TiO2 Nanofluid

2020 ◽  
Vol 17 (3) ◽  
Author(s):  
A.M. Zetty Akhtar ◽  
M.M. Rahman ◽  
K. Kadirgama ◽  
M.A. Maleque
Keyword(s):  
Thermal Conductivity ◽  
Zeta Potential ◽  
Base Fluid ◽  
Minimum Quantity Lubrication ◽  
Cutting Fluid ◽  
Cutting Zone ◽  
Observation Method ◽  
The Stability ◽  
The Relationship ◽  
Zeta Potential Analysis

This paper presents the findings of the stability, thermal conductivity and viscosity of CNTs (doped with 10 wt% graphene)- TiO2 hybrid nanofluids under various concentrations. While the usage of cutting fluid in machining operation is necessary for removing the heat generated at the cutting zone, the excessive use of it could lead to environmental and health issue to the operators. Therefore, the minimum quantity lubrication (MQL) to replace the conventional flooding was introduced. The MQL method minimises the usage of cutting fluid as a step to achieve a cleaner environment and sustainable machining. However, the low thermal conductivity of the base fluid in the MQL system caused the insufficient removal of heat generated in the cutting zone. Addition of nanoparticles to the base fluid was then introduced to enhance the performance of cutting fluids. The ethylene glycol used as the base fluid, titanium dioxide (TiO2) and carbon nanotubes (CNTs) nanoparticle mixed to produce nanofluids with concentrations of 0.02 to 0.1 wt.% with an interval of 0.02 wt%. The mixing ratio of TiO2: CNTs was 90:10 and ratio of SDBS (surfactant): CNTs was 10:1. The stability of nanofluid checked using observation method and zeta potential analysis. The thermal conductivity and viscosity of suspension were measured at a temperature range between 30˚C to 70˚C (with increment of 10˚C) to determine the relationship between concentration and temperature on nanofluid’s thermal physical properties. Based on the results obtained, zeta potential value for nanofluid range from -50 to -70 mV indicates a good stability of the suspension. Thermal conductivity of nanofluid increases as an increase of temperature and enhancement ratio is within the range of 1.51 to 4.53 compared to the base fluid. Meanwhile, the viscosity of nanofluid shows decrements with an increase of the temperature remarks significant advantage in pumping power. The developed nanofluid in this study found to be stable with enhanced thermal conductivity and decrease in viscosity, which at once make it possible to be use as nanolubricant in machining operation.

A FORECAST OF PRODUCTIVE LONGEVITY OF HOLSTEIN COWS BY INDIRECT SIGNS

2020 ◽  
Author(s):  
З.С. САНОВА
Keyword(s):  
Correlation Coefficient ◽  
Aging Process ◽  
Direct Relationship ◽  
Stability Index ◽  
Age At First Calving ◽  
Group I ◽  
Predicted Values ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship

В статье представлены материалы о взаимосвязи продолжительности продуктивного использования коров с характеристикой устойчивости к деградации, с возрастом отела и удоем. В исследованной, разнородной по происхождению, группе животных для прогноза продуктивного периода коров, обусловленного устойчивостью к деградации и возрастом первого отела, пригодно уравнение регрессии, аргументами в котором являются индекс устойчивости, возраст первого отела в первой и второй степенях. Коэффициент корреляции межу предсказанными значениями продуктивного периода и его фактическими величинами в I группе составляет 0,502, во II - 0,604. При этом крайние варианты прогнозируются со статистическими ошибками 5 мес при оценке индекса устойчивости по 2 лактациям и 4,1 мес по 3, а средние варианты, соответственно, 1,6 и 1,51 мес. Индекс устойчивости к процессу старения является важной характеристикой биологических особенностей коров, определяющий их продуктивное долголетие. Его оценка по первым 2 и 3 лактациям имеет прямолинейную связь с продуктивным периодом (r=0,4109 и r=0,5270), соответственно. Зависимость продуктивного периода от возраста первого отела криволинейная — с увеличением возраста первого отела сокращается срок продуктивного использования, при возрасте первого отела более 1400 дней срок продуктивного использования колеблется от 1,33 до 1,41 лактации. Коэффициент корреляции между этими характеристиками коров составляет - 0,2164 в I и - 0,2620 во II группах. The article presents materials about the relationship of the duration of productive use of cows with the characteristic of resistance to degradation, with the age of calving and milk yield. In the studied group of animals, which is heterogeneous in origin, the regression equation is suitable for predicting the productive period of cows due to resistance to degradation and the age of the first calving, the arguments of which are the stability index, the age of the first calving in the first and second degrees. The correlation coefficient between the predicted values of the productive period and its actual values in group I is 0.502, in group II - 0.604. At the same time, the extreme variants are predicted with statistical errors of 5 months when evaluating the stability index for 2 lactations and 4.1 months for 3, and the average variants, respectively, are 1.6 and 1.51 months. The index of resistance to the aging process is an important characteristic of the biological characteristics of cows, which determines their productive longevity. Its estimate for the first 2 and 3 lactations has a direct relationship with the productive period (r=0.4109 and r=0.5270), respectively. The dependence of the productive period age at first calving curvilinear with increasing age at first calving reduces the time to productive use, while age at first calving of more than 1400 days, the period of productive use ranges from 1.33 to 1.41 lactation. The correlation coefficient between these characteristics of cows is-0.2164 in I and-0.2620 in II groups.

Sign in / Sign up

Export Citation Format

Share Document