scholarly journals Continuous and autonomous snow water equivalent measurements by a cosmic ray sensor on an alpine glacier

2019 ◽  
Vol 13 (12) ◽  
pp. 3413-3434 ◽  
Author(s):  
Rebecca Gugerli ◽  
Nadine Salzmann ◽  
Matthias Huss ◽  
Darin Desilets

Abstract. Snow water equivalent (SWE) measurements of seasonal snowpack are crucial in many research fields. Yet accurate measurements at a high temporal resolution are difficult to obtain in high mountain regions. With a cosmic ray sensor (CRS), SWE can be inferred from neutron counts. We present the analyses of temporally continuous SWE measurements by a CRS on an alpine glacier in Switzerland (Glacier de la Plaine Morte) over two winter seasons (2016/17 and 2017/18), which differed markedly in the amount and timing of snow accumulation. By combining SWE with snow depth measurements, we calculate the daily mean density of the snowpack. Compared to manual field observations from snow pits, the autonomous measurements overestimate SWE by +2 % ± 13 %. Snow depth and the bulk snow density deviate from the manual measurements by ±6 % and ±9 %, respectively. The CRS measured with high reliability over two winter seasons and is thus considered a promising method to observe SWE at remote alpine sites. We use the daily observations to classify winter season days into those dominated by accumulation (solid precipitation, snow drift), ablation (snow drift, snowmelt) or snow densification. For each of these process-dominated days the prevailing meteorological conditions are distinct. The continuous SWE measurements were also used to define a scaling factor for precipitation amounts from nearby meteorological stations. With this analysis, we show that a best-possible constant scaling factor results in cumulative precipitation amounts that differ by a mean absolute error of less than 80 mm w.e. from snow accumulation at this site.

2019 ◽  
Author(s):  
Rebecca Gugerli ◽  
Nadine Salzmann ◽  
Matthias Huss ◽  
Darin Desilets

Abstract. Snow water equivalent (SWE) measurements are crucial in many research fields. Yet accurate measurements at a high temporal resolution are difficult to obtain in high mountain regions. With a cosmic ray sensor (CRS), SWE can be directly derived from neutron counts. In this study, we present the analyses of temporally continuous SWE measurements by a CRS on a Swiss glacier (Glacier de la Plaine Morte) over two winter seasons (2016/17 and 2017/18), which were markedly different in terms of amount and timing of snow accumulation. By combining the SWE values with snow depth measurements, we calculate the daily mean density of the snowpack. The autonomous measurements overestimate SWE by +2 % ± 12 % compared to manual field observations (snow pits). Snow depth and mean density agree with manual in situ measurements with a standard deviation of ±6 % and ±8 %, respectively. In general, the cosmic ray sensor measured with high reliability during these two winter seasons and is, thus, considered an effective method to measure SWE at remote high alpine sites. We use the daily observations to break down the winter season into days either dominated by accumulation (solid precipitation, snow drift), ablation (snow drift, melt) or snow densification. The prevailing meteorological conditions of these periods are clearly distinct for each of the classified processes. Moreover, we compare daily SWE amounts to precipitation sums from three nearby weather stations located at lower elevations, and to a gridded precipitation dataset. We determine the best-possible scaling factor for these precipitation estimates in order to reproduce the measured accumulation on the glacier. Using only one scaling factor for the whole time series, we find a mean absolute error of less than 8 cm w.e. for the reproduced snow accumulation. By applying temperature-specific scaling factors, this mean absolute error can be reduced to less than 6 cm w.e. for all stations.


2021 ◽  
Vol 11 (18) ◽  
pp. 8365
Author(s):  
Liming Gao ◽  
Lele Zhang ◽  
Yongping Shen ◽  
Yaonan Zhang ◽  
Minghao Ai ◽  
...  

Accurate simulation of snow cover process is of great significance to the study of climate change and the water cycle. In our study, the China Meteorological Forcing Dataset (CMFD) and ERA-Interim were used as driving data to simulate the dynamic changes in snow depth and snow water equivalent (SWE) in the Irtysh River Basin from 2000 to 2018 using the Noah-MP land surface model, and the simulation results were compared with the gridded dataset of snow depth at Chinese meteorological stations (GDSD), the long-term series of daily snow depth dataset in China (LSD), and China’s daily snow depth and snow water equivalent products (CSS). Before the simulation, we compared the combinations of four parameterizations schemes of Noah-MP model at the Kuwei site. The results show that the rainfall and snowfall (SNF) scheme mainly affects the snow accumulation process, while the surface layer drag coefficient (SFC), snow/soil temperature time (STC), and snow surface albedo (ALB) schemes mainly affect the melting process. The effect of STC on the simulation results was much higher than the other three schemes; when STC uses a fully implicit scheme, the error of simulated snow depth and snow water equivalent is much greater than that of a semi-implicit scheme. At the basin scale, the accuracy of snow depth modeled by using CMFD and ERA-Interim is higher than LSD and CSS snow depth based on microwave remote sensing. In years with high snow cover, LSD and CSS snow depth data are seriously underestimated. According to the results of model simulation, it is concluded that the snow depth and snow water equivalent in the north of the basin are higher than those in the south. The average snow depth, snow water equivalent, snow days, and the start time of snow accumulation (STSA) in the basin did not change significantly during the study period, but the end time of snow melting was significantly advanced.


2020 ◽  
Vol 15 (6) ◽  
pp. 688-697
Author(s):  
Hiroyuki Hirashima ◽  
Tsutomu Iyobe ◽  
Katsuhisa Kawashima ◽  
Hiroaki Sano ◽  
◽  
...  

This study developed a snow load alert system, known as the “YukioroSignal”; this system aims to provide a widespread area for assessing snow load distribution and the information necessary for aiding house roof snow removal decisions in snowy areas of Japan. The system was released in January 2018 in Niigata Prefecture, Japan, and later, it was expanded to Yamagata and Toyama prefectures in January 2019. The YukioroSignal contains two elements: the “Quasi-Real-Time Snow Depth Monitoring System,” which collects snow depth data, and the numerical model known as SNOWPACK, which can calculate the snow water equivalent (SWE). The snow load per unit area is estimated to be equivalent to SWE. Based on the house damage risk level, snow load distribution was indicated by colors following the ISO 22324. The system can also calculate post-snow removal snow loads. The calculated snow load was validated by using the data collected through snow pillows. The simulated snow load had a root mean square error (RMSE) of 21.3%, which was relative to the observed snow load. With regard to residential areas during the snow accumulation period, the RMSE was 13.2%. YukioroSignal received more than 56,000 pageviews in the snowheavy 2018 period and 26,000 pageviews in the less snow-heavy 2019 period.


2020 ◽  
Vol 21 (12) ◽  
pp. 2943-2962
Author(s):  
Rebecca Gugerli ◽  
Marco Gabella ◽  
Matthias Huss ◽  
Nadine Salzmann

AbstractThe snow water equivalent (SWE) is a key component for understanding changes in the cryosphere in high mountain regions. Yet, a reliable quantification at a high spatiotemporal resolution remains challenging in such environments. In this study, we investigate the potential of an operational weather radar–rain gauge composite (CombiPrecip) to infer the daily evolution of SWE on seven Swiss glaciers. To this end, we validate cumulative CombiPrecip estimates with glacier-wide manual SWE observations (snow probing, snow pits) obtained around the time of the seasonal peak during four winter seasons (2015–19). CombiPrecip underestimates the end-of-season snow accumulation by factors of 2.2 up to 3.7, depending on the glacier site. These factors are consistent over the four winter seasons. The regional variability can be mainly attributed to the empirical visibility of the Swiss radar network within the Alps. To account for the underestimation, we investigate three approaches to adjust CombiPrecip for the applicability to glacier sites. Thereby, we combine the factor of underestimation with a precipitation-phase parameterization. For further comparison, we apply a rain gauge catch-efficiency function based on wind speed. We validate these approaches with 14 manual point observations of SWE obtained on two glaciers during three winter seasons. All approaches show a similar improvement of CombiPrecip estimates. We conclude that CombiPrecip has great potential to estimate SWE on glaciers at a high temporal resolution, but further investigations are necessary to understand the regional variability of the bias throughout the Swiss Alps.


2017 ◽  
Author(s):  
Esteban Alonso-González ◽  
J.¬Ignacio López-Moreno ◽  
Simon Gascoin ◽  
Matilde García-Valdecasas Ojeda ◽  
Alba Sanmiguel-Vallelado ◽  
...  

Abstract. We present snow observations and a validated daily gridded snowpack dataset that was simulated from downscaled reanalysis of data for the Iberian Peninsula. The Iberian Peninsula has long-lasting seasonal snowpacks in its different mountain ranges, and winter snowfalls occur in most of its area. However, there are only limited direct observations of snow depth (SD) and snow water equivalent (SWE), making it difficult to analyze snow dynamics and the spatiotemporal patterns of snowfall. We used meteorological data from downscaled reanalyses as input of a physically based snow energy balance model to simulate SWE and SD over the Iberian Peninsula from 1980 to 2014. More specifically, the ERA-Interim reanalysis was downscaled to 10 × 10 km resolution using the Weather Research and Forecasting (WRF) model. The WRF outputs were used directly, or as input to other submodels, to obtain data needed to drive the Factorial Snow Model (FSM). We used lapse-rate coefficients and hygrobarometric adjustments to simulate snow series at 100 m elevations bands for each 10 × 10 km grid cell in the Iberian Peninsula. The snow series were validated using data from MODIS satellite sensor and ground observations. The overall simulated snow series accurately reproduced the interannual variability of snowpack and the spatial variability of snow accumulation and melting, even in very complex topographic terrains. Thus, the presented dataset may be useful for many applications, including land management, hydrometeorological studies, phenology of flora and fauna, winter tourism and risk management. The data presented here are available for free download from Zenodo (DOI: https://doi.org/10.5281/zenodo.854618).This paper fully describes the work flow, data validation, uncertainty assessment and possible applications and limitations of the database.


2021 ◽  
Author(s):  
David N. Wagner ◽  
Matthew D. Shupe ◽  
Ola G. Persson ◽  
Taneil Uttal ◽  
Markus M. Frey ◽  
...  

Abstract. Data from the Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition allowed us to investigate the temporal dynamics of snowfall, snow accumulation, and erosion in great detail for almost the whole accumulation season (November 2019 to May 2020). We computed cumulative snow water equivalent (SWE) over the sea ice based on snow depth (HS) and density retrievals from a SnowMicroPen (SMP) and approximately weekly-measured snow depths along fixed transect paths. Hence, the computed SWE considers surface heterogeneities over an average path length of 1469 m. We used the SWE from the snow cover to compare with precipitation sensors installed during MOSAiC. The data were compared with ERA5 reanalysis snowfall rates for the drift track. Our study shows that the simple fitted HS-SWE function can well be used to compute SWE along a transect path based on SMP SWE retrievals and snow-depth measurements. We found an accumulated snow mass of 34 mm SWE until 26 April 2020. Further, we found that the Vaisala Present Weather Detector 22 (PWD22), installed on a railing on the top deck of research vessel Polarstern was least affected by blowing snow and showed good agreements with SWE retrievals along the transect, however, it also systematically underestimated snowfall. The OTT Pluvio2 and the OTT Parsivel2 were largely affected by wind and blowing snow, leading to higher measured precipitation rates, but when eliminating drifting snow periods, especially the OTT Pluvio2 shows good agreements with ground measurements. A comparison with ERA5 snowfall data reveals a good timing of the snowfall events and good agreement with ground measurements but also a tendency towards overestimation. Retrieved snowfall from the ship-based Ka-band ARM Zenith Radar (KAZR) shows good agreements with SWE of the snow cover and comparable differences as ERA5. Assuming the KAZR derived snowfall as an upper limit and PWD22 as a lower limit of a cumulative snowfall range, we estimate 72 to 107 mm measured between 31 October 2019 and 26 April 2020. For the same period, we estimate the precipitation mass loss along the transect due to erosion and sublimation as between 53 and 68 %. Until 7 May 2020, we suggest a cumulative snowfall of 98–114 mm.


2021 ◽  
Vol 18 ◽  
pp. 7-20
Author(s):  
Rebecca Gugerli ◽  
Matteo Guidicelli ◽  
Marco Gabella ◽  
Matthias Huss ◽  
Nadine Salzmann

Abstract. Accurate and reliable solid precipitation estimates for high mountain regions are crucial for many research applications. Yet, measuring snowfall at high elevation remains a major challenge. In consequence, observational coverage is typically sparse, and the validation of spatially distributed precipitation products is complicated. This study presents a novel approach using reliable daily snow water equivalent (SWE) estimates by a cosmic ray sensor on two Swiss glacier sites to assess the performance of various gridded precipitation products. The ground observations are available during two and four winter seasons. The performance of three readily-available precipitation data products based on different data sources (gauge-based, remotely-sensed, and re-analysed) is assessed in terms of their accuracy compared to the ground reference. Furthermore, we include a data set, which corresponds to the remotely-sensed product with a local adjustment to independent SWE measurements. We find a large bias of all precipitation products at a monthly and seasonal resolution, which also shows a seasonal trend. Moreover, the performance of the precipitation products largely depends on in situ wind direction during snowfall events. The varying performance of the three precipitation products can be partly explained with their compilation background and underlying data basis.


2018 ◽  
Vol 10 (1) ◽  
pp. 303-315 ◽  
Author(s):  
Esteban Alonso-González ◽  
J. Ignacio López-Moreno ◽  
Simon Gascoin ◽  
Matilde García-Valdecasas Ojeda ◽  
Alba Sanmiguel-Vallelado ◽  
...  

Abstract. We present snow observations and a validated daily gridded snowpack dataset that was simulated from downscaled reanalysis of data for the Iberian Peninsula. The Iberian Peninsula has long-lasting seasonal snowpacks in its different mountain ranges, and winter snowfall occurs in most of its area. However, there are only limited direct observations of snow depth (SD) and snow water equivalent (SWE), making it difficult to analyze snow dynamics and the spatiotemporal patterns of snowfall. We used meteorological data from downscaled reanalyses as input of a physically based snow energy balance model to simulate SWE and SD over the Iberian Peninsula from 1980 to 2014. More specifically, the ERA-Interim reanalysis was downscaled to 10 km  ×  10 km resolution using the Weather Research and Forecasting (WRF) model. The WRF outputs were used directly, or as input to other submodels, to obtain data needed to drive the Factorial Snow Model (FSM). We used lapse rate coefficients and hygrobarometric adjustments to simulate snow series at 100 m elevations bands for each 10 km  ×  10 km grid cell in the Iberian Peninsula. The snow series were validated using data from MODIS satellite sensor and ground observations. The overall simulated snow series accurately reproduced the interannual variability of snowpack and the spatial variability of snow accumulation and melting, even in very complex topographic terrains. Thus, the presented dataset may be useful for many applications, including land management, hydrometeorological studies, phenology of flora and fauna, winter tourism, and risk management. The data presented here are freely available for download from Zenodo (https://doi.org/10.5281/zenodo.854618). This paper fully describes the work flow, data validation, uncertainty assessment, and possible applications and limitations of the database.


2020 ◽  
Vol 12 (23) ◽  
pp. 3905
Author(s):  
Kegen Yu ◽  
Yunwei Li ◽  
Taoyong Jin ◽  
Xin Chang ◽  
Qi Wang ◽  
...  

Snow depth and snow water equivalent (SWE) are two parameters for measuring snowfall. By exploiting the Global Navigation Satellite System reflectometry (GNSS-R) technique and thousands of existing GNSS Continuous Operating Reference Stations (CORS) deployed in the cryosphere, it is possible to improve the temporal and spatial resolutions of the SWE measurement. In this paper, a fusion model for combining multi-satellite SNR (Signal to Noise Ratio) snow depth estimations is proposed, which uses peak spectral powers associated with each of the snow depth estimations. To simplify the estimation of SWE, the complete snowfall period over a winter season is split into snow accumulation, transition, and melting period in accordance with the variation characteristics of snow depth and SWE. By extensively using in situ snow depth and SWE observations recorded by snow telemetry network (SNOTEL) and regression analysis, three empirical models are developed to describe the relationship between snow depth and SWE for the three periods, respectively. Based on the snow depth fusion model and the SWE empirical models, an SWE estimation algorithm is proposed. Three data sets recorded in different environments are used to test the proposed method. The results demonstrate that there exists good agreement between the in situ SWE measurements and the SWE estimates produced by the proposed method; the root-mean-square error of SWE estimations is smaller than 6 cm when the SWE is up to 80 cm.


2021 ◽  
Author(s):  
Rebecca Gugerli ◽  
Darin Desilets ◽  
Nadine Salzmann

Abstract. Monitoring the snow water equivalent (SWE) in the harsh environments of high mountain regions is a challenge. Here, we explore the use of muon counts to infer SWE. We deployed a muonic cosmic ray snow gauge (µ-CRSG) on a Swiss glacier during the snow rich winter season 2020/21 (almost 2000 mm w.e.). The µ-CRSG measurements agree well with measurements by a neutronic cosmic ray snow gauge (n-CRSG) and they lie within the uncertainty of manual observations. We conclude that the µ-CRSG is a highly promising method to monitor SWE in remote high mountain environments with several advantages over the n-CRSG.


Sign in / Sign up

Export Citation Format

Share Document