scholarly journals Synthesis Carboxyl Methyl Cellulose (CMC) from Rice Straw (Oryza Sativa L.) Waste

2021 ◽  
Vol 2 (1) ◽  
pp. 24-29
Author(s):  
Masrullita Masrullita ◽  
Rizka Nurlaila ◽  
Zulmiardi Zulmiardi ◽  
Ferri Safriwardy ◽  
Auliani Auliani ◽  
...  
Keyword(s):  
Rice Straw ◽  
Carboxymethyl Cellulose ◽  
Oryza Sativa L ◽  
Economic Value ◽  
Chemical Properties ◽  
Methyl Cellulose ◽  
Basic Material ◽  
Cellulose Content ◽  
Total Production ◽  
Two Stages

Rice straw is one of material containing cellulose to produce Carboxymethyl Cellulose (CMC). CMC is a non toxic polysaccharide that produces from cellulose that widely used in the pharmaceutical, food, textile, detergent, and cosmetic products industries. There are two stages usually use to produce CMC which are mercerization and esterification processes. Rice straw waste is one of the materials to produce CMC, it has a cellulose content of 37.7%, hemi-cellulose 21.99%, and lignin 16.62 %.  BPS Aceh shown that the total rice harvested area was 310.01 hectares, with a total production of 1.71 million tons, and rice produced at 982.57 thousand ton. This study aims to reduce waste and environmental pollution caused by rice straw and collects information of rice straw as a basic material to produce of carboxymethyl cellulose and to increase the economic value of rice straw.  The effects of various wieght parameters sodium monochloroacetate on chemical properties of CMC that produce from rice straw were investigated in this research. Rice straw was collected from a rice field in Nisam, North Aceh. The research conducted by synthesizing 5 grams rice straw for 5.5 hours using NaOH and Sodium Monochloroacetate solutions. With variations weight of sodium monochloroacetate are 5,6,7,8 and 9 grams. The characterization of CMC was carried out by Fourier Transform Infrared (FTIR), CMC yield, DS, Viscosity, water content, pH. The result shows that addition of sodium monochloroacetate was significant factors influence the chemical properties on CMC. The CMC that produced in this study achieved to National Indonesia Standard (SNI).

scholarly journals Preparation and Characterization of Chitosan-Gelatin-Glycerol Biocomposite for Primary Wound Dressing

2021 ◽  
Vol 2 (1) ◽  
pp. 64-69
Author(s):  
Suryati Suryati ◽  
Meriatna Meriatna ◽  
Sulhatun Sulhatun ◽  
Dwi Ayu Lestari
Keyword(s):  
Rice Straw ◽  
Carboxymethyl Cellulose ◽  
Economic Value ◽  
Chemical Properties ◽  
Basic Material ◽  
Cellulose Content ◽  
Total Production ◽  
Two Stages ◽  
Significant Factors

Rice straw is one of material containing cellulose to produce Carboxymethyl Cellulose (CMC). CMC is a non toxic polysaccharide that produces from cellulose that widely used in the pharmaceutical, food, textile, detergent, and cosmetic products industries. There are two stages usually use to produce CMC which are mercerization and esterification processes. Rice straw waste is one of the materials to produce CMC, it has a cellulose content of 37.7%, hemi-cellulose 21.99%, and lignin 16.62 %.  BPS Aceh shown that the total rice harvested area was 310.01 hectares, with a total production of 1.71 million tons, and rice produced at 982.57 thousand ton. This study aims to reduce waste and environmental pollution caused by rice straw and collects information of rice straw as a basic material to produce of carboxymethyl cellulose and to increase the economic value of rice straw.  The effects of various wieght parameters sodium monochloroacetate on chemical properties of CMC that produce from rice straw were investigated in this research. Rice straw was collected from a rice field in Nisam, North Aceh. The research conducted by synthesizing 5 grams rice straw for 5.5 hours using NaOH and Sodium Monochloroacetate solutions. With variations weight of sodium monochloroacetate are 5,6,7,8 and 9 grams. The characterization of CMC was carried out by Fourier Transform Infrared (FTIR), CMC yield, DS, Viscosity, water content, pH. The result shows that addition of sodium monochloroacetate was significant factors influence the chemical properties on CMC. The CMC that produced in this study achieved to National Indonesia Standard (SNI).

scholarly journals Pemanfaatan Jerami Padi (Oryza Sativa L.) Sebagai Bahan Baku Dalam Pembuatan CMC (Carboximetil Cellulose)

2021 ◽  
Vol 15 (2) ◽  
pp. 194
Author(s):  
RIZKA NURLAILA
Keyword(s):  
Oryza Sativa ◽  
Reaction Time ◽  
Rice Straw ◽  
Carboxymethyl Cellulose ◽  
Oryza Sativa L ◽  
Raw Material ◽  
Cellulose Content ◽  
Cosmetic Products ◽  
High Cellulose

Rice straw is a waste from rice plants that contains 37.71% cellulose, 21.99% hemicellulose, and 16.62% lignin. High cellulose content in rice straw can be used as raw material for the manufacture of Carboxymethyl Cellulose (CMC). CMC is a cellulose derivative widely used in food, pharmaceutical, detergent, textile and cosmetic products industries as a thickener, stabilizer of emulsions, or suspensions and bonding. This study aims to process rice straw waste into CMC with variations in sodium monochloroacetate of 5,6,7,8 and 9 grams. The method used in this research is by synthesis using 15% NaOH solvent, with a reaction time of 3.5 hours and 5 grams of rice straw. The results showed that the best CMC was obtained at a concentration of 9 grams of sodium monochloroacete with a yield characterization of 94%, pH 6, water content of 13.39%, degree of substitution (Ds) of 0.80, and viscosity of 1.265 cP.

scholarly journals Pengaruh Pretreatment Secara Alkalisasi-Resistive Heating terhadap Kandungan Lignoselulosa Jerami Padi

2017 ◽  
Vol 37 (2) ◽  
pp. 132
Author(s):  
Dewi Maya Maharani ◽  
Lisa Normalasari ◽  
Dianita Kumalasari ◽  
Chandra Ardin Hersandi Prakoso ◽  
Mutiara Kusumaningtyas ◽  
...  
Keyword(s):  
Rice Straw ◽  
Heating Temperature ◽  
Combine Method ◽  
Degradation Process ◽  
Raw Material ◽  
Basic Material ◽  
Heating Process ◽  
Cellulose Content ◽  
Bioethanol Production ◽  
Resistive Heating

Cellulose is a potential biomass that is used for bioethanol production and commonly present in agricultural residues like rice straw. Cellulose is an important material to produce glucose and bioethanol, but it is covered by lignin and hemicellulose bonds to form a lignocellulose.  Bioethanol production using basic material containing cellulose requires special attention in the process of pretreatment for lignin degradation process and increase the accessible surface and decrystallize cellulose. The aim of this research was to apply alkalization and resistive heating combine method for rice straw pretreatment process before further being converted into bioethanol and to determine the effects of heating temperature and NaOH concentration on the content of  lignin, cellulose, and hemicellulose. The reactor had been designed for resistive heating process. Rice straw that was resized into 100 mesh has dissolved with 0.03 M, 0.05 M, and 0.07 M NaOH and heated with resistive heating temperature of 75 oC, 85 oC, and 99 oC. Cellulose is a raw material that will be further converted into glucose. So that, the selected optimum conditions of this study were  pretreatment with the highest increase of cellulose content level until 8.88% and resulted decreasing levels of lignin (1.39%) and hemicellulose (4.33%) by temperature  75 oC and 0.07 M NaOH concentration. Resistive heating that combine with alkalization can be used for rice straw pretreatment process that reduce lignin and hemicellulose content as well as increasing cellulose content. ABSTRAKSelulosa merupakan biomassa yang potensial digunakan untuk produksi bioetanol dan banyak ditemukan di residu pertanian seperti jerami padi. Selulosa merupakan material penting yang dapat dikonversi menjadi glukosa kemudian dikonversi menjadi bioetanol, namun selulosa pada alam dilapisi oleh ikatan lignin dan hemiselulosa menjadi lignoselulosa. Pembuatan bioetanol berbasis selulosa membutuhkan proses pretreatment yang berfungsi untuk mendegradasi ikatan lignin, meningkatkan luas permukaan biomassa dan dekristalisasi selulosa. Tujuan dari penelitian ini adalah mengetahui pengaruh alkalisasi resistive heating pada proses pretreatment jerami padi sebelum dikonversi lebih lanjut menjadi bioetanol dan mengetahui pengaruh suhu pemanasan serta konsentrasi NaOH selama pretreatment terhadap perubahan kandungan lignin, selulosa dan hemiselulosa. Sebelum dilakukan penelitian dilakukan perancangan reaktor resistive heating. Jerami padi ukuran 100 mesh dilarutkan pada larutan NaOH dengan variasi konsentrasi 0,03 M, 0,05 M, dan 0,07 M, selanjutnya dipanaskan pada reaktor resistive heating dengan variasi suhu pemanasan 75 oC, 85 oC, dan 99 oC. Selulosa merupakan senyawa yang akan dikonversi lebih lanjut menjadi glukosa. Sehingga pada penelitian ini dipilih kondisi optimum berdasarkan peningkatan selulosa tertinggi hingga 8,88% serta penurunan lignin dan hemiselulosa sebesar 1,39% dan 4,33% pada perlakuan suhu pemanasan 75 oC dan konsentrasi NaOH 0,07 M. Alkalisasi resistive heating dapat diterapkan pada pretreatment jerami padi karena dapat mengurangi kandungan lignin dan hemiselulosa serta meningkatkan kandungan selulosa.

scholarly journals NaCl- and Na2SO4-Induced Salinity Differentially Affect Clay Soil Chemical Properties and Yield Components of Two Rice Cultivars (Oryza sativa L.) in Burundi

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 571
Author(s):  
Willy Irakoze ◽  
Hermann Prodjinoto ◽  
Séverin Nijimbere ◽  
Jean Berchmans Bizimana ◽  
Joseph Bigirimana ◽  
...  
Keyword(s):  
Oryza Sativa L ◽  
Stomatal Density ◽  
Tap Water ◽  
Chemical Properties ◽  
Soil Chemical Properties ◽  
Control Treatment ◽  
Saline Stress ◽  
Plant Responses ◽  
Rice Grain ◽  
Resistance Level

Salinity may strongly influence the interaction between plant roots and surrounding soil, but this has been poorly studied for sodium sulfate (Na2SO4). The aim of this study was to investigate the effect of sodium chloride (NaCl) and Na2SO4 salinities on the soil chemical properties as well as rice physiological- and yield-related parameters of two contrasted cultivars (V14 (salt-sensitive) and Pokkali (salt-resistant)). Pot experiments were conducted using soil and electrolyte solutions, namely NaCl and Na2SO4, inducing two electrical conductivity levels (EC: 5 or 10 dS m−1) of the soil solutions. The control treatment was water with salt-free tap water. Our results showed that soil pH increased under Na2SO4 salinity, while soil EC increased as the level of saline stress increased. Salinity induced an increase in Na+ concentrations on solid soil complex and in soil solution. NaCl reduced the stomatal density in salt-sensitive cultivar. The total protein contents in rice grain were higher in V14 than in Pokkali cultivar. Saline stress significantly affected all yield-related parameters and NaCl was more toxic than Na2SO4 for most of the studied parameters. Pokkali exhibited a higher tolerance to saline stress than V14, whatever the considered type of salt. It is concluded that different types of salts differently influence soil properties and plant responses and that those differences partly depend on the salt-resistance level of the considered cultivar.

scholarly journals Assessment of Pellets from Three Forest Species: From Raw Material to End Use

Forests ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 447
Author(s):  
Miguel Alfonso Quiñones-Reveles ◽  
Víctor Manuel Ruiz-García ◽  
Sarai Ramos-Vargas ◽  
Benedicto Vargas-Larreta ◽  
Omar Masera-Cerutti ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Ash Content ◽  
Hot Water ◽  
Raw Material ◽  
Chemical Components ◽  
Energy Yield ◽  
Cellulose Content ◽  
Fixed Carbon ◽  
End Use ◽  
The Impact

This study aimed to evaluate and compare the relationship between chemical properties, energy efficiency, and emissions of wood and pellets from madroño Arbutus xalapensis Kunth, tázcate Juniperus deppeana Steud, and encino colorado Quercus sideroxyla Humb. & Bonpl. in two gasifiers (top-lit-up-draft (T-LUD) and electricity generation wood camp stove (EGWCS)) in order to determine the reduction of footprint carbon. In accordance with conventional methodologies, we determined the extracts and chemical components (lignin, cellulose, holocellulose), and the immediate analyses were carried out (volatile materials, fixed carbon, ash content and microanalysis of said ash), as well as the evaluation of emission factors (total suspended particulate matter (PM2.5), CO, CO2, CH4, black carbon (BC), elemental carbon (EC), and organic carbon (OC)). The results were statistically analyzed to compare each variable among species and gasifiers. The raw material analyzed showed how the pH ranged from 5.01 to 5.57, and the ash content ranged between 0.39 and 0.53%. The content values of Cu, Zn, Fe, Mg, and Ca ranged from 0.08 to 0.22, 0.18 to 0.19, 0.38 to 0.84, 1.75 to 1.90, and 3.62 to 3.74 mg kg−1, respectively. The extractive ranges from cyclohexane were 2.48–4.79%, acetone 2.42–4.08%, methanol 3.17–7.99%, and hot water 2.12–4.83%. The range of lignin was 18.08–28.60%. The cellulose content ranged from 43.30 to 53.90%, and holocellulose from 53.50 to 64.02%. The volatile material range was 81.2–87.42%, while fixed carbon was 11.30–17.48%; the higher heating value (HHV) of raw material and pellets presented the ranges 17.68–20.21 and 19.72–21.81 MJ kg−1, respectively. Thermal efficiency showed statistically significant differences (p < 0.05) between pellets and gasifiers, with an average of 31% Tier 3 in ISO (International Organization for Standardization) for the T-LUD and 14% (ISO Tier 1) for EGWCS, with Arbutus xalapensis being the species with the highest energy yield. The use of improved combustion devices, as well as that of selected raw material species, can reduce the impact of global warming by up to 33% on a cooking task compared to the three-stone burner.

scholarly journals Reducing Substrate Moisture Content during Greenhouse Production of Poinsettia Improves Postproduction Quality and Economic Value

HortScience ◽  
2018 ◽  
Vol 53 (11) ◽  
pp. 1618-1628
Author(s):  
Yanjun Guo ◽  
Terri Starman ◽  
Charles Hall
Keyword(s):  
Moisture Content ◽  
Economic Value ◽  
Growth Index ◽  
Dry Weight ◽  
Leaf Number ◽  
Stem Length ◽  
Total Production ◽  
Greenhouse Production ◽  
Ethylene Concentration ◽  
Substrate Moisture

The objective was to determine the effect of substrate moisture content (SMC) during poinsettia (Euphorbia pulcherrima) greenhouse production on plant quality, postproduction longevity, and economic value. Two experiments were conducted, one in 2016 with ‘Freedom Red’ and the other in 2017 with ‘Christmas Eve Red’. Treatments included two SMC levels (20% or 40%) applied in four timing of application combinations. Total production (TP) time was 14 (2016) or 12 (2017) weeks in which vegetative production (VP) occurred from week 33 (2016) or 35 (2017) to week 39 and reproductive production (RP) continued from week 40 to 47. The four timing of application treatments were 40/40 = TP at 40% SMC; 20/40 = VP at 20% + RP at 40%; 40/20 = VP at 40% + RP at 20%; 20/20 = TP at 20% SMC. After simulated shipping in the dark, plants were evaluated in a simulated retail environment with two packaging treatments: no sleeve covering or plastic perforated plant sleeves covering container and plant. At the end of greenhouse production, plants grown in 20% SMC during RP (20/20 and 40/20) had shorter bract internode length, stem length, and smaller growth index (GI), decreased shoot and root dry weight (DW), and bract and leaf surface area compared with those in 40% SMC during RP (40/40 and 20/40). Photosynthetic rate was higher when plants were watered at 40% SMC regardless of production stage compared with those in 20% SMC. Leaf thickness, petiole thickness, total bract and leaf number were unaffected by SMC treatments. Plants in 20% SMC during RP (20/20 or 40/20) had earlier bract coloring despite days to anthesis being the same for all SMC treatments. Compared with 40/40, 40/20, and 20/20 could save 44.2% or 43.6%, respectively, irrigation and fertilizer usage, and 39.1% and 47.8%, respectively, labor time. During postharvest, ethylene concentration was unaffected by packaging method. Sleeved plants, regardless of SMC treatment, received lower light intensity in the middle of the plant canopy, causing plants to have lower total leaf number due to abscission and SPAD reading at the end of postproduction. The 40/40 treatment abscised more bracts during five weeks (in 2016) of postproduction and with no sleeve had higher number of bracts with bract edge burn (BEB). In summary, reducing SMC to 20% during TP or RP reduced water usage during production and produced more compact plants with increased postproduction quality.

scholarly journals Effects of Paint Industry Effluent on Soil Productivity

1970 ◽  
Vol 32 (1) ◽  
pp. 41-53
Author(s):  
YN Jolly ◽  
A Islam ◽  
SB Quraishi ◽  
AI Mustafa
Keyword(s):  
Dry Matter ◽  
Oryza Sativa L ◽  
Chemical Properties ◽  
Water Soluble ◽  
Soil Productivity ◽  
High Concentration ◽  
Effluent Concentration ◽  
Paint Industry ◽  
Industry Effluent ◽  
The Impact

The impact of various dilutions (2.5, 5, 10, 25 and 50%) of paint industry effluent on physico-chemical properties of soil and the germination, growth and dry matter productions of corn (Zea mays L.) and rice (Oryza sativa L.) have been studied. The effluent was acidic and had low BOD and COD values because of its low content of suspended solid. It contained high concentration of calcium, medium concentrations of nitrogen, sodium, potassium, sulphate, chloride and low concentrations of phosphorus, magnesium and bicarbonate. The trace element like Mn, Ni, Cu, Zn and Pb were measured in the μg L-1 level. On irrigation of soil with the effluent an increase in the water soluble salts, pH, electrical conductivity, cation exchange capacity, nitrogen, phosphorus potassium, sodium, calcium, magnesium and iron contents of the soil for effluent concentrations of 2.5, 5 and 10% were observed but all these parameters were found to decrease on treatment of the soil with the effluent concentration of 25% and above. The effluent of the lower concentrations (2.5, 5 and 10%) enhanced the growth of both crops. However, negative effects on seed germination, dry matter production and the yield of both crops were found for the effluent concentration of 25% and above. doi: 10.3329/jbas.v32i1.2441 Journal of Bangladesh Academy of Sciences, Vol. 32, No. 1, 41-53, 2008

scholarly journals Selection of drought tolerant rice varieties for the western mid hills of Nepal

2018 ◽  
pp. 195-206
Author(s):  
B. B. Adhikari ◽  
B. Mehera ◽  
S. M. Haefele
Keyword(s):  
Oryza Sativa L ◽  
Block Design ◽  
Cropping System ◽  
Root Weight ◽  
Total Production ◽  
Wet Season ◽  
Growth Duration ◽  
Rice Varieties ◽  
Participatory Varietal Selection ◽  
Drought Tolerant

Rice (Oryza sativa L) is the most important staple food crop in Nepal, but current yields are low and total production varies, mostly due to drought. To evaluate high yielding and drought tolerant rice genotypes in typical rainfed lowland conditions, a participatory varietal selection trials was conducted with farmers in farmer’s field at Sundarbazar, Lamjung, Nepal during the wet season 2009 and 2010. Trials were laid out in a Randomized Complete Block Design with six replications. Results obtained from two years’ experiment indicated that the genotypes IR-74371-54-1 and IR74371-70-1 matured at the same duration as the local check Radha-4 (120-123 days growth duration). Both genotypes had a high average chlorophyll content (SPAD reading of 15.9-16.1), were medium tall (110-112 cm), non-lodging, had a high number of filled grains and little sterility, and a high grain yield (mean yield 5.0 and 4.8 t ha-1, respectively). They also had the highest root length (22.4-26.2 cm) and root weight (9.5-10 g hill-1) which could tolerate more drought than the other genotypes tested. The maximum cost/benefit ratio was found in IR-74371-54-1 (1:1.72) followed by IR-74371-70-1 (1:1.66) and IR-74371-46-1-1 (1:1.65). All three lines were highly preferred by farmers in preference rankings during field visits and were released in Nepal in 2011 as Sookhadhan-2, Sookhadhan-3 and Sookhadhan-1 varieties, respectively. They fit easily into the existing cropping system in rainfed lowlands, are economically viable and safe to cultivate for the farmers in the mid hills of Nepal.Journal of the Institute of Agriculture and Animal Science.Vol. 33-34, 2015, page: 195-206

Sign in / Sign up

Export Citation Format

Share Document