scholarly journals HPLC Method Development for the Fast Separation of a Complex Explosive Mixture

2021 ◽  
Vol 1 (1) ◽  
pp. 75-83
Author(s):  
Benmalek BOULESNAM ◽  
Fahima HAMI ◽  
Djalal TRACHE ◽  
Toudert AHMED ZAID
Keyword(s):  
Mobile Phase ◽  
High Performance ◽  
Method Development ◽  
Hplc Method ◽  
Column Temperature ◽  
Nitrate Esters ◽  
Forensic Scientists ◽  
Robust Separation ◽  
Chromatographic Parameters ◽  
Hplc Method Development

The growing threat of terrorism in many parts of the world has called for the urgent need to find rapid and reliable means of analyzing explosives. This is in view to help forensic scientists to identify different swabs from post-blast debris. The present study aims to achieve an efficient separation and identification of a mixture of sixteen explosive compounds (including nitroaromatics, nitramines, and nitrate esters) by high performance liquid chromatography using a diode array detection (HPLC/DAD) and an Agilent Poroshell 120 EC-120 C18 column at two wavelengths (235 and 214 nm). Relevant chromatographic parameters such as capacity factors, resolution, selectivity and number of theoretical plates have been optimized in order to achieve the best separation of the different components. In this respect, the effects of various parameters such as gradient time, column temperature, flow rate of mobile phase and initial percentage organic mobile phase on the separation of these compounds were investigated. It was revealed that the method allowed a fairly acceptable separation of all the compounds in less than 15 minutes except for two isomers, namely 4-A-2,6-DNT, 2-A-4,6-DNT and 2,6- DNT which could not be resolved by the used C18 column. This shortcoming notwithstanding, the developed method produced satisfactory results and demonstrated sensitive and robust separation, furthermore indicating that the HPLC developed method can be both fast and efficient for the analysis of complex mixtures of explosive compounds.

High performance liquid chromatography (HPLC) method development and validation for the determination of flunixin: Animal plasma based study

2021 ◽  
pp. 1-11
Author(s):  
Sultan M. Alshahrani ◽  
John Mark Christensen
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
High Performance ◽  
Method Development ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Limit Of Quantification ◽  
Mobile Phases ◽  
Hplc Method Development ◽  
Development And Validation

This study was designed to develop and validate a simple and efficient high performance liquid chromatography (HPLC) method to determine flunixin concentrations in Asian elephant’s (Elephas maximus) plasma. Flunixin was administered orally at a dose of 0.8 mg/kg, and blood samples were collected. Flunixin extraction was performed by adding an equal amount of acetonitrile to plasma and centrifuging at 4500 rpm for 25 minutes. The supernatant was removed, and flunixin was analyzed using HPLC-UV detection. Two methods were developed and tested utilizing two different mobile phases either with or without adding methanol (ACN: H2O vs. ACN: H2O: MeOH). Both methods showed excellent linearity and reproducibility. The limit of detection was 0.05 ug/ml and limit of quantification was 0.1 ug/ml. the efficiency of flunixin recovery was maximized by the addition of methanol to mobile phase (ACN: H2O: MeOH as 50:30:20) at 95% in comparison to 23% without methanol. In conclusion, adding methanol to HPLC methods for extraction of flunixin from elephants’ plasma yielded higher recovery rate than without methanol.

RP-HPLC METHOD DEVELOPMENT FOR THE ASSAY OF AMPHOTERICIN B

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (02) ◽  
pp. 16-20
Author(s):  
L Mohankrishna ◽  
◽  
P. J. Reddy ◽  
B. P Reddy. ◽  
P. Navya
Keyword(s):  
Amphotericin B ◽  
Mobile Phase ◽  
Method Development ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Ich Guidelines ◽  
Relative Standard ◽  
Phase Combination ◽  
Hplc Method Development

A sensitive and precise HPLC procedure has been developed for the assay of amphotericin B in bulk samples and pharmaceutical formulations by using a C18 column [Kromosil, C18, (5 µm, 4.6mm x 250 mm; Make. Waters)], and mobile phase combination is 1% formic acid in water and acetonitrile in ratio of 45:55 V/V. The procedure has been validated as per the ICH guidelines. The λmax of detection was fixed at 407 nm, so that there was less interference from mobile phase with highest sensitivity according to UV analysis. Calibration plots were linear in the range of 10-100 µg/mL and the LOD and LOQ were 0.02 µg/mL and 0.06 µg/mL respectively. The high recovery and low relative standard deviation confirm the suitability of the method for routine quality control determination of amphotericin B in different formulations.

HPLC METHOD DEVELOPMENT, VALIDATION, AND FORCED DEGRADATION FOR SIMULTANEOUS ANALYSIS OF OXYCODONE AND NALTREXONEIN PHARMACEUTICAL DOSAGE FORM

INDIAN DRUGS ◽  
2019 ◽  
Vol 56 (02) ◽  
pp. 31-38
Author(s):  
R. S. Ch Phani ◽  
◽  
K. R. S. Prasad ◽  
R. M Useni
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Forced Degradation ◽  
Solution Stability ◽  
Pharmaceutical Dosage Form ◽  
Column Temperature ◽  
Degradation Study ◽  
Ich Guidelines ◽  
Hplc Method Development

A simple, precise and stability-indicating RP-HPLC method was developed for simultaneous quantification of oxycodone (OXCD) and naltrexone (NTRX) in combined dosage form. The developed method was validated with respect to precision, linearity, accuracy, robustness, ruggedness, sensitivity and solution stability. The method was developed with ammonium di hydrogen phosphate buffer (pH 5.0) and acetonitrile in a ratio of 55:45 (v/v) as mobile phase at a flow rate of 1.0 mL/minute over Intersil ODS C18 column (250 mm × 4.6 mm×5μ).The UV detection wavelength was fixed at 235 nm. The column temperature was maintained at ambient temperature. The method showed good linearity with correlation coefficient values of 0.9990 and 0.9994 for OXCD and NTRX. The percent recoveries of the two drugs found within the limits of 98.0–102.0%. The LOQ concentrations of OXCD and NTRX are 0.625 μg/ mL and 0.075 μg/mL, respectively. The LOD concentrations of OXCD and NTRX are 0.3125 μg/mL and 0.0375 μg/mL, respectively. According to ICH guidelines forced degradation study was validated.

scholarly journals NOVEL RP-HPLC METHOD DEVELOPMENT AND VALIDATION FOR ESTIMATION OF TELMISARTAN AND NEBIVOLOL HCL IN PHARMACEUTICAL DOSAGE FORM

2018 ◽  
Vol 11 (9) ◽  
pp. 431 ◽  
Author(s):  
Heena Ar Shaikh ◽  
Vandana Jain
Keyword(s):  
High Performance ◽  
Dosage Form ◽  
Method Development ◽  
Limit Of Detection ◽  
Hplc Method ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Form ◽  
Rp Hplc ◽  
Validation Parameters ◽  
Hplc Method Development

Objective: A simple, accurate, precise, robust reverse phase high performance liquid chromatography (RP-HPLC) method was developed for the estimation of telmisartan and nebivolol hydrochloride (HCl) simultaneously in its combined dosage form.Methods: The compounds were well resolved in an isocratic method using the mobile phase composition of acetonitrile: Buffer (potassium dihydrogen orthophosphate pH adjusted 3.1 with orthophosphoric acid) in a ratio of 40:60 v/v at a flow rate of 1.2 ml/min using C18 Shim-pack (150 mm × 4.6 mm, 5 μ) column. The detection was carried out at 280 nm.Results: The retention time of telmisartan and nebivolol HCl was 4.8 min and 6.5 min, respectively. The developed method was validated by evaluating various validation parameters such as linearity, precision, accuracy, robustness, specificity, limit of detection, and limit of quantification according to the international council for harmonization guidelines. The standard calibration curve was obtained in the concentration range of 24–56 μg/ml for telmisartan and 3–7 μg/ml for nebivolol HCl. The overall average % recovery was found out to be 100.35 for telmisartan and 98.84 for nebivolol HCl.Conclusion: Statistical analysis of the data showed that the method is reproducible and selective for the estimation of telmisartan and nebivolol HCl. The proposed method could be used for analysis of telmisartan and nebivolol HCl in their dosage form.

scholarly journals An HPLC method for the determination of digoxin in dissolution samples

2010 ◽  
Vol 75 (11) ◽  
pp. 1583-1594 ◽  
Author(s):  
Miroslav Milenkovic ◽  
Valentina Marinkovic ◽  
Predrag Sibinovic ◽  
Radosav Palic ◽  
Dragan Milenovic
Keyword(s):  
Mobile Phase ◽  
Hplc Method ◽  
Stability Testing ◽  
Column Length ◽  
Column Temperature ◽  
Chromatographic Parameters ◽  
The Impact ◽  
Full Factorial ◽  
Phase Column

An HPLC method for digoxin quantification in dissolution samples obtained as per the official British Pharmacopeia (BP) method is presented in this paper. The chromatography was performed at 20 ?C on a Symmetry C18; 3.5 ?m, 75 x 4.6 mm column with water - acetonitrile (72 : 28, v/v), as the mobile phase and UV detection at 220 nm. The method was found to be selective, linear, accurate and precise in the specified ranges. The LOD and LOQ were 0.015 ?g mL-1 and 0.050 ?g mL-1, respectively. Robustness testing was conducted to evaluate the impact of minor changes in the chromatographic parameters (i.e., acetonitrile fraction, flow rate of the mobile phase, column temperature and column length) on the characteristics of the digoxin peak. A. full factorial design (24) was used to investigate the influence of the four variables The presented HPLC method was applied in quality and stability testing of Digoxin tablets 0.25 mg.

scholarly journals RP-HPLC Method Development and Its Validation for Quantitative Determination of Rimonabant in Human Plasma

2012 ◽  
Vol 2012 ◽  
pp. 1-4 ◽  
Author(s):  
Shravan Bankey ◽  
Ganesh Tapadiya ◽  
Jasvant Lamale ◽  
Deepti Jain ◽  
Shweta Saboo ◽  
...  
Keyword(s):  
Human Plasma ◽  
Mobile Phase ◽  
Method Development ◽  
Bioequivalence Study ◽  
Hplc Method ◽  
Liquid Extraction ◽  
Liquid Liquid Extraction ◽  
Rp Hplc ◽  
Hplc Method Development

A simple, accurate, and precise HPLC method was developed and validated for determination of rimonabant in human plasma. Following liquid-liquid extraction, chromatographic separation was accomplished using C18 column with mobile phase consisting of acetonitrile : water (90 : 10, v/v), drug was detected at 260 nm using UVdetector. The LOD and LOQ were 3.0 and 10.0 μg/L, respectively. The method is linear in the interval 50.0–1000.0 μg/L. The average extraction recovery of drug from plasma was found to be 92.2%. The percent CV of the method was found to be less than 10.8%, and accuracy was found between 94.5 and 106.7%. The assay may be applied to a pharmacokinetic and bioequivalence study of rimonabant.

scholarly journals RP-HPLC Method Development and Validation for Simultaneous Estimation of Clarithromycin and Paracetamol

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Sadana Gangishetty ◽  
Surajpal Verma
Keyword(s):  
High Performance ◽  
Method Development ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Uv Detector ◽  
Rp Hplc ◽  
Ich Guidelines ◽  
Hplc Method Development ◽  
Development And Validation

The present work describes a simple, rapid, and reproducible reverse phase high performance liquid chromatography (RP-HPLC) method for the simultaneous estimation of clarithromycin (CLA) and paracetamol (PCM). C18 column (Kromasil ODS, 5 µm, 250 × 4.6 mm) and a mobile phase containing phosphate buffer (0.05 M) along with 1-octane sulphonic acid sodium salt monohydrate (0.005 M) adjusted to pH 3.2: acetonitrile (50 : 50 v/v) mixture was used for the separation and quantification. The flow rate was 1.0 mL/min and the eluents were detected by UV detector at 205 nm. The retention times were found to be 2.21 and 3.73 mins, respectively. The developed method was validated according to ICH guidelines Q2 (R1) and found to be linear within the range of 75–175 µg/mL for both drugs. The developed method was applied successfully for assay of clarithromycin and paracetamol in their combined in-house developed dosage forms and in vitro dissolution studies.

scholarly journals RP-HPLC Method Development and Validation for the Estimation of Midostaurin in Bulk and Pharmaceutical Dosage Form

2020 ◽  
Vol 11 (4) ◽  
pp. 5108-5112
Author(s):  
Narayanaswamy Harikrishnan ◽  
Gejalakshmi Subramanian ◽  
Hemalatha C N ◽  
Pavankumar V
Keyword(s):  
Mobile Phase ◽  
Dosage Form ◽  
Method Development ◽  
Hplc Method ◽  
Area Measurement ◽  
Internal Diameter ◽  
Limit Values ◽  
Pharmaceutical Dosage Form ◽  
Validation Parameters ◽  
Hplc Method Development

An elementary, Valid, speedy and decisive strategy was developed to determine Midostaurin quantitatively in a fixed dosage form. Effective Chromatographic separation of Midostaurin was achieved by using Hypersil C18 Column (250 mm X 4.6 mm internal diameter, five μm particle size) using a mobile phase composed of Methanol and Buffer in the proportion of 75:25(by volume). The Mobile phase was siphoned using a gradient HPLC system at a flow rate of 1.0 ml/min, and quantification was based on peak area measurement at 270 nm. RT (Retention Time) for Midostaurin was 2.142 min, and dimensionality of Midostaurin was found to be linear with a statistic value of 0.999. The acceptance criteria of precision were relative variance should be less than 2.0%, and also the strategy showed precision 0.3 for Midostaurin, which shows that the tactic was precise. The full Recovery was found to be 99.96 %. Detection Limit and Quantitation Limit values for Midostaurin were found as 0.439 & 1.466. The exactness and authenticity were assessed by evaluation of validation parameters like linearity, precision, specificity, accuracy, LOD, LOQ values as per ICH guidelines. The proposed strategy has been applied to the formulation without additives interference and specific for the estimation of Midostaurin.

scholarly journals QbD approach to HPLC method development and validation of ceftriaxone sodium

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Krunal Y. Patel ◽  
Zarna R. Dedania ◽  
Ronak R. Dedania ◽  
Unnati Patel
Keyword(s):  
Mobile Phase ◽  
Method Development ◽  
Quality By Design ◽  
Hplc Method ◽  
Design Expert ◽  
Ceftriaxone Sodium ◽  
Method Development And Validation ◽  
Hplc Method Development ◽  
Development And Validation ◽  
Central Composite

Abstract Background Quality by design (QbD) refers to the achievement of certain predictable quality with desired and predetermined specifications. A quality-by-design approach to method development can potentially lead to a more robust/rugged method due to emphasis on risk assessment and management than traditional or conventional approach. An important component of the QbD is the understanding of dependent variables, various factors, and their interaction effects by a desired set of experiments on the responses to be analyzed. The present study describes the risk based HPLC method development and validation of ceftriaxone sodium in pharmaceutical dosage form. Results An efficient experimental design based on central composite design of two key components of the RP-HPLC method (mobile phase and pH) is presented. The chromatographic conditions were optimized with the Design Expert software 11.0 version, i.e., Phenomenex ODS column C18 (250 mm × 4.6 mm, 5.0 μ), mobile phase used acetonitrile to water (0.01% triethylamine with pH 6.5) (70:30, v/v), and the flow rate was 1 ml/min with retention time 4.15 min. The developed method was found to be linear with r2 = 0.991 for range of 10–200 μg/ml at 270 nm detection wavelength. The system suitability test parameters, tailing factor and theoretical plates, were found to be 1.49 and 5236. The % RSD for intraday and inter day precision was found to be 0.70–0.94 and 0.55–0.95 respectively. The robustness values were less than 2%. The assay was found to be 99.73 ± 0.61%. The results of chromatographic peak purity indicate the absence of any coeluting peaks with the ceftriaxone sodium peak. The method validation parameters were in the prescribed limit as per ICH guidelines. Conclusion The central composite design experimental design describes the interrelationships of mobile phase and pH at three different level and responses to be observed were retention time, theoretical plates, and peak asymmetry with the help of the Design Expert 11.0 version. Here, a better understanding of the factors that influence chromatographic separation with greater confidence in the ability of the developed HPLC method to meet their intended purposes is done. The QbD approach to analytical method development was used for better understanding of method variables with different levels.

scholarly journals RP-HPLC Method Development and Validation for the Estimation of Mirabegron in Bulk and Dosage Form

2020 ◽  
Vol 10 (1) ◽  
pp. 31-38
Author(s):  
Rahul Suryawanshi ◽  
Siddiqua Shaikh ◽  
Snehal Patil
Keyword(s):  
High Performance ◽  
Method Development ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Simultaneous Estimation ◽  
Limit Of Quantification ◽  
Rp Hplc ◽  
Hplc Method Development ◽  
Tablet Dosage

A new, simple, precise, accurate and reproducible Reverse Phase High Performance Liquid Chromatography (RP-HPLC) method for Simultaneous estimation of bulk and pharmaceutical formulations. Separation of Mirabegron was successfully achieve , C18, 250X4.6mm, 5µm or equivalent in an isocratic mode utilizing methanol water (70:30) at pH 5.0 Adjusted to OPA at a flow rate of 1.0ml/min and eluate was monitored at 243nm, with a retention time of 2.584 minutes for Mirabegron. The method was validated and the response was found to be linear in the drug concentration range of 50µg/ml to150 µg/ml for Mirabegron. The values of the correlation coefficient were found to 0.999for Mirabegron. The Limit of Detection(LOD) and Limit of Quantification (LOQ) for Mirabegron were found to be 0.149 and 0.498 respectively. This method was found to be good percentage recovery were found to be 99 indicates that the proposed method is highly accurate. The specificity of the method shows good correlation between retention times of standard with the sample so, the method specifically determines the analyte in the sample without interference from excipients of tablet dosage forms. The method was extensively validated according to International Council for Harmonisation(ICH) guidelines for Linearity, Accuracy, Precision, Specificity and

Sign in / Sign up

Export Citation Format

Share Document