scholarly journals Study on the Performance of the Separate type Heat Pipe Using the Parallel Flow type Heat Exchanger

2015 ◽  
Vol 16 (8) ◽  
pp. 5045-5050 ◽  
Author(s):  
Sung-Taek Jeon ◽  
Jin-Pyo Cho
Keyword(s):  
Heat Exchanger ◽  
Heat Pipe ◽  
Parallel Flow ◽  
Separate Type ◽  
Flow Type

scholarly journals Thermodynamic Analysis of Efficiency- NTU Parameters for Parallel Flow Type Heat Exchanger under the Effect of External Heat Leak

2018 ◽  
Vol 7 (1) ◽  
pp. 59-65
Author(s):  
Roopesh Tiwari
Keyword(s):  
Heat Capacity ◽  
Heat Exchanger ◽  
External Heat ◽  
Parallel Flow ◽  
Heat Leak ◽  
Cold Side ◽  
Flow Type ◽  
Opposite Behavior ◽  
Minimum Capacity ◽  
Minimum Heat

The work presented here analyses theoretically a parallel flow type heat exchanger which is subjected to external heat leak, from the cold fluid side or from the hot fluid side. Efficiency-NTU relations are developed and the results obtained are presented graphically, reflecting the effect of heat capacity ratios and the heat leak on the efficiency of the heat exchanger. The graphs follow the similar pattern with increasing heat capacity ratios. Also, as the heat leak is increased, the graphs show opposite behavior when the minimum heat capacity is on the hot side to that when the minimum capacity is on the cold side. The derived expressions are reduced to the classical effectiveness-efficiency-NTU relations for the parallel flow type heat exchangers as the heat leak approaches zero.

scholarly journals Kaji efisiensi temperatur penukar panas dengan variasi aliran untuk aplikasi pengering

2018 ◽  
Vol 16 (2) ◽  
pp. 39
Author(s):  
Syukran Syukran
Keyword(s):  
Fluid Flow ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
Cross Flow ◽  
Fluid Phase ◽  
Parallel Flow ◽  
Small Scale ◽  
Counter Flow ◽  
Flow Type ◽  
Temperature Efficiency

Abstrak Heat exchanger atau alat penukar panas adalah alat-alat yang digunakan untuk mengubah temperatur fluida atau mengubah fasa fluida dengan cara mempertukarkan panasnya dengan fluida lain. Pada sebuah penukar panas kemampuan mempertukarkan panas sangat ditentukan oleh tipe dan jenis aliran fluida yang melewati penukar panas. Secara garis besar penukar panas dibagi berdasarkan arah aliran fluidanya. Berdasarkan arah aliran fluida penukar panas  dibedakan menjadi 3 (tiga) jenis aliran, yaitu aliran searah (parallel flow), aliran berlawanan (counter flow) dan aliran silang (cross flow). Saat ini penukar panas banyak dipakai dalam  industri pengeringan produk-produk pertanian, perkebunan dan perikanan skala kecil dan menengah. Penggunaan penukar panas dalam bidang pengeringan saat ini sudah menjadi kebutuhan untuk mengatasi permasalahan produktifitas pengeringan. Umumnya penukar panas yang digunakan adalah tipe aliran berlawanan. Beberapa penelitian telah dilakukan untuk mengetahui efektifitas penukar panas tersebut yang umumnya berfokus pada jenis aliran berlawanan. Penelitian penelitian spesifik yang mengkaji perbandingan efisiensi penukar panas  untuk ketiga jenis aliran belum ditemukan. Penelitian ini dilakukan untuk mengetahui efisiensi temperatur penukar panas untuk jenis aliran jenis aliran melintang, sejajar, dan  berlawanan. Metode penelitian dilakukan fabrikasi 3 unit exchanger tipe gas-gas dengan dimensi 50 (P) x 10 (L) x 30 (T) dengan jumlah tube 17 susunan. Hasil  penelitian menunjukkan bahwa efisiensi temperatur untuk ketiga jenis penukar panas tersebut adalah 21,3% aliran melintang, 17,3% aliran berlawanan dan 15,9%  aliran sejajar. Hasil penelitian menyimpulkan bahwa efisiensi temperatur tertinggi diperoleh jenis penukar panas aliran melintang. Kata kunci : Penukar panas, aliran sejajar, aliran berlawanan, aliran silang, temperatur.  Abstrack Heat exchangers or heat exchangers are the means used to change the temperature of the fluid or to change the fluid phase by exchanging heat with other fluids. In a heat exchanger the heat exchange ability is greatly determined by the type and type of fluid flow passing through the heat exchanger. Broadly speaking the exchanger is divided based on the direction of fluid flow. Based on the direction of fluid flow exchanger is divided into 3 (three) types of flow, namely parallel flow, counter flow and cross flow. Currently, heat exchangers are widely used in the drying industry of small and medium-sized agricultural and small-scale plantation and fishery products. The use of exchangers in the field of drying is now a need to overcome the problems of drying productivity. Generally the exchanger used is the opposite flow type (counter flow). Several studies have been conducted to determine the effectiveness of these exchangers which generally focus on the opposite type of flow. Specific research studies that reviewed the efficiency of exchangers for the three types of flow have not been found. This research was conducted to find out the efficiency of heat exchanger temperature for flow type of cross flow, parallel flow and counter flow type. The research method was fabricated 3 units of gas-gas exchanger type with dimension 50 (P) x 10 (L) x 30 (T) with the number of tubes 17 staggered arrangement. The results show that the temperature efficiency for the three types of heat exchanger is 21.3% cross flow flow, 17.3% flow counter flow and 15.9% parallel flow flow. The results concluded that the highest temperature efficiency obtained by cross flow flow type exchanger. Keywords: Heat exchanger, parallel flow, counter flow, cross flow, temperature

Optimal design of the separate type heat pipe heat exchanger

2005 ◽  
Vol 6 (S1) ◽  
pp. 23-28 ◽  
Author(s):  
Zi-tao Yu ◽  
Ya-cai Hu ◽  
Ke-fa Cen
Keyword(s):  
Heat Exchanger ◽  
Optimal Design ◽  
Heat Pipe ◽  
Separate Type ◽  
Pipe Heat

EXPERIMENTAL INVESTIGATION OF HEAT PIPE HEAT EXCHANGER (HPHE) FOR WASTE HEAT RECOVERY APPLICATION

2019 ◽  
Author(s):  
Sakil Hossen ◽  
AKM M. Morshed ◽  
Amitav Tikadar ◽  
Azzam S. Salman ◽  
Titan C. Paul
Keyword(s):  
Experimental Investigation ◽  
Heat Exchanger ◽  
Heat Pipe ◽  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Pipe Heat
Sign in / Sign up

Export Citation Format

Share Document