The Effects of Storage Time and Environmental Storage Conditions on Flour Quality, Dough Rheology, and Biscuit Characteristics: The Case Study of a Traditional Italian Biscuit (Biscotto di Prato)

Many types of baked goods are firmly rooted in the food habits of many people in different countries. Although there have been great strides in improving milling, kneading, and baking, given the lack of essential studies, further steps forward need to be taken to understand the effects of storage time and environmental storage conditions, thus motivating this work. The aim of this study is to assess the effects of storage time, using one-way ANOVA, and environmental storage conditions (environmental temperature and humidity), using MOLS analysis, on flour composition, dough rheology, and biscuit characteristics. Seven levels of storage time were tested: T0 (control), T1, T2, T3, T4, T5, and T6. The results showed that flour storage time significantly increased dough tenacity (P) and curve configuration ratio (P/L), and decreased the biscuit volume (best at T0). However, 2–3 weeks of storage highlighted a significant increase in deformation energy (W), an essential alveograph parameter that is closely correlated to the technological success of leavened products. This optimum found for W might be considered as a great stride in understanding the effects of storage time, confirming that wheat flour can reach its optimal performance after two-three weeks of storage, in particular for W. Moreover, this information could be useful, not only for biscuits production, but also for bread and bakery products (and, thus, the entire bakery industry). MOLS analysis highlighted that dough rheology and biscuit characteristics are mainly affected by flour composition (primarily from starch content) rather than environmental storage parameters. In conclusion, to optimize the biscuit characteristics, it is necessary to use flours with a low content of damaged starch by selecting the most suitable milling technique and carefully managing the operative parameters.

Influence of Buckwheat Seed Fractions on Dough and Baking Performance of Wheat Bread

The study was conducted to determine the influence of buckwheat fractions (BF) on the physicochemical characteristics of wheat flour (WF), dough rheology, and bread quality parameters. Buckwheat seeds’ fractionation influenced the microstructure and molecular conformation depending on the particle size (PS). The protein content of the WF–BF improved when the medium PS was added and decreased for large and small PS. Lipids and ash increased with the increase in BF amount in all samples in comparison with the control. Dough tenacity increased with BF addition, being higher than in WF dough only when large PS were added, while samples with medium and small PS presented a lower tenacity in comparison with the control. Dough extensibility decreased significantly in all samples when BF increased, as follows: M ˃ S ˃ L. Dough viscoelastic moduli increased proportionally when adding large PS, while the addition of medium PS (5–15%) and small PS decreased it. Bread firmness, springiness, and gumminess rose proportionally with the addition level. Bread volume decreased when BF increased, and medium PS had a good influence on this parameter. Bread porosity and elasticity presented higher values than for the control bread, but these decreased when the BF amount increased. Flour and bread crust and crumb color parameters were also influenced by different fractions of BF addition.

The Role of Hydrocolloids in Gluten-Free Bread and Pasta; Rheology, Characteristics, Staling and Glycemic Index

Hydrocolloids are important ingredients controlling the quality characteristics of the final bakery products. Hydrocolloids are frequently used in gluten-free (GF) recipes, mimicking some rheological properties of gluten, improving dough properties, delaying starch retrogradation and improving bread texture, appearance and stability. Hydrocolloids addition increases viscosity and incorporation of air into the GF dough/batter. Besides their advantages for the technological properties of the GF bread, hydrocolloids addition may impact the glycemic index (GI) of the final product, thus answering the demand of people requiring products with low GI. This review deals with the application of hydrocolloids in GF bread and pasta with a focus on their effect on dough rheology, bread hardness, specific volume, staling and GI.

Unravelling consensus genomic regions associated with quality traits in wheat (Triticum aestivum L.) using meta-analysis of quantitative trait loci

A meta-analysis of quantitative trait loci (QTLs) associated with following six major quality traits (i) arabinoxylan, (ii) dough rheology properties, (iii) nutritional traits, (iv) polyphenol content, (v) processing quality traits, and (vi) sedimentation volume was conducted in wheat. For this purpose, as many as 2458 QTLs were collected from the 50 mapping studies published during 2013-20. Of the total QTLs, 1126 QTLs were projected on to the consensus map saturated with 2,50,077 markers resulting into the identification of 110 meta-QTLs (MQTLs) with average confidence interval (CI) of 5.6 cM. These MQTLs had 18.84 times reduced CI compared to CI of initial QTLs. Fifty-one (51) MQTLs were also verified with the marker-trait associations (MTAs) detected in earlier genome-wide association studies (GWAS). Physical region occupied by a single MQTL ranged from 0.12 to 749.71 Mb with an average of 130.25 Mb. Candidate gene mining allowed the identification of 2533 unique gene models from the MQTL regions. In-silico expression analysis discovered 439 differentially expressed gene models with >2 transcripts per million (TPM) expression in grains and related tissues which also included 44 high-confidence candidate genes known to be involved in the various cellular and biochemical processes related to quality traits. Further, nine functionally characterized wheat genes associated with grain protein content, high molecular weight glutenin and starch synthase enzymes were also found to be co-localized with some of the MQTLs. In addition, synteny analysis between wheat and rice MQTL regions identified 23 wheat MQTLs syntenic to 16 rice MQTLs. Furthermore, 64 wheat orthologues of 30 known rice genes were detected in 44 MQTL regions. These genes encoded proteins mainly belonging to the following families: starch synthase, glycosyl transferase, aldehyde dehydrogenase, SWEET sugar transporter, alpha amylase, glycoside hydrolase, glycogen debranching enzyme, protein kinase, peptidase, legumain and seed storage protein enzyme.

Characteristics of Dough Rheology and the Structural, Mechanical, and Sensory Properties of Sponge Cakes with Sweeteners

Changes in the rheological properties of dough, as well as the microstructural, mechanical, and sensory properties of sponge cakes, as a function of the substitution of sucrose in a formulation with maltitol, erythritol, and trehalose are described. Moreover, the relationship between the examined properties was investigated. The replacement of sucrose with maltitol or trehalose did not affect the consistency index, whereas erythritol caused a decrease in its value. X-ray tomography was used to obtain the 2D and 3D microstructures of sponge cakes. All studied sweeteners caused the sponge cakes to have a typical porous structure. Erythritol and maltitol resulted in about 50% of the pores being smaller than 0.019 mm2 and 50% of the pores being larger than 0.032 mm2. Trehalose resulted in a homogeneous microstructure, 98% of whose pores were similar in size (0.019 to 0.032 mm2). The sponge cakes with polyols had a higher structure index than did the trehalose and sucrose samples. There were also significant differences in color parameters (lightness and chromaticity). The crust of the sponge cake with sweeteners was lighter and had a less saturated color than the crust of the sponge cake with sucrose. The sponge cake with maltitol was the most similar to the sponge cake with sucrose, mainly due to the mechanical and sensory properties. Trehalose led to the samples having high adhesiveness, which may limit its application as a sucrose substitute in sponge cake. Sensory properties were strongly correlated to cohesiveness, adhesiveness, and springiness and did not correlate to the 2D and 3D microstructures. It was found that 100% replacement of sucrose allows for a porous structure to be obtained. These results confirm that it is not the structure, but most of all the flavor, that determines the sensory perception of the sponge cakes.

The Characteristics of Steamed Bread from Reconstituted Whole Wheat Flour (WWF) of Different Hard Wheat Classes with Different Bran Particle Size Distributions

The purpose of this study was to investigate the effects of reconstituted whole wheat flour (WWF) particle size on flour characteristics and northern-type steamed bread (NTSB) quality. In this study, hard white (HW), hard red winter (HRW), and hard red spring (HRS) wheat classes, and four different bran particle size distributions [D(50) values of 53 μm, 74 μm, 105 μm, and 125 μm] were blended at a ratio of 85% refined flour + 15% bran to create reconstituted WWF and make reconstituted WWF NTSB. Farinograph water absorption and water solvent retention capacity (SRC) increased as bran particle size decreased. Flour and dough strength tests such as lactic acid SRC and Farinograph and Mixolab development time and stability did not show any clear trends with bran particle size. HRW WWF tended to be the exception as Farinograph development time and stability generally increased as particle size increased. Resistance to extension increased as bran particle size decreased for HRW WWF and increased as particle size increased for HW and HRS. These differences in WWF dough rheology trends were likely due to differences in gluten characteristics between the classes. The results showed that larger particle sizes (105 μm and 125 μm) were more conducive to achieving desirable whole wheat NTSB specific volume, color, and texture.