Eco-Friendly, Simple, Fast, and Sensitive UPLC-MS/MS Method for Determination of Pexidartinib in Plasma and Its Application to Metabolic Stability

Pexidartinib is the first drug approved by the U.S. Food and Drug Administration specifically to treat the rare joint tumor tenosynovial giant cell tumor. In the current study, a validated, selective, and sensitive UPLC-MS/MS assay was developed for the quantitative determination of pexidartinib in plasma samples using gifitinib as an internal standard (IS). Pexidartinib and IS were extracted by liquid-liquid extraction using methyl tert-butyl ether and separated on an acquity BEH C18 column kept at 40 °C using a mobile phase of 0.1% formic acid in acetonitrile: 0.1% formic acid in de-ionized water (70:30). The flow rate was 0.25 mL/min. Multiple reaction monitoring (MRM) was operated in electrospray (ESI)-positive mode at the ion transition of 418.06 > 165.0 for the analyte and 447.09 > 128.0 for the IS. FDA guidance for bioanalytical method validation was followed in method validation. The linearity of the established UPLC-MS/MS assay ranged from 0.5 to 1000 ng/mL with r > 0.999 with a limit of quantitation of 0.5 ng/mL. Moreover, the metabolic stability of pexidartinib in liver microsomes was estimated.

EFFECT OF AN EXTRAGENT ON THE COMPOSITION OF THE LIPOPHILIC CONSTITUENTS OF THE EXTRACTS OF RHODIOLA ROSEA L. AND ON THE EXTRACTS ACTIVITY

The composition of the plant Rhodiola rosea L. lipophylic substances was studied. Acidic and neutral components were identified by gas-chromatography-mass-spectrometry. With methyl-tert-butyl ether (MTBE) as an extractant instead of the volatile solvent diethyl ether, lipophylic extract was obtained. Methyl-tert-butyl ether used as an extraction solvent for raw materials has all the advantages of diethyl ether, being free of its disadvantages. It does not form peroxides or produce elevated partial gas pressure due to its higher boiling point. As a result, comparison with databases identified some triterpene, phenolic and aliphatic acids with chain lengths 12 to 30 carbon atoms, including saturated, unsaturated, and dibasic acids. In addition to the components known from the literature, more than 50 triterpene and aliphatic compounds were detected in the unsaponifiable residue and acidic fractions for the first time. The hexane extract and the product obtained by the stepwise extraction of MTBE after the extraction of low-polarity compounds with hexane were investigated in a similar way. In the case of an extract obtained using MTBE after the extraction of low-polarity components with hexane, there was shown a more efficient extraction of benzoic and cinnamic acids compared to the exhaustive extraction of MTBE. These acids are absent in the hexane extract. Ethanol extraction was also carried out to test bioactivity: exhaustive and after hexane and MTBE extraction. Extracts obtained using MTBE and ethanol showed anti-virus activity against Ebola psevdovirus.

Novel Extraction Method for Combined Lipid and Metal Speciation From Caenorhabditis elegans With Focus on Iron Redox Status and Lipid Profiling

Parkinson´s disease progression is linked to iron redox status homeostasis via reactive oxygen species (ROS) formation, and lipids are the primary targets of ROS. The determination of iron redox status in vivo is challenging and requires specific extraction methods, which are so far tedious and very time-consuming. We demonstrated a novel, faster, and less laborious extraction method using the chelator ethylene glycol l-bis(β-aminoethyl ether)-N,N,N′,N′-tetra acetic acid (EGTA) as a stabilizing agent and synthetic quartz beads for homogenization under an argon atmosphere. Additionally, we combined the metal extraction with a well-established lipid extraction protocol using methyl-tert-butyl ether (MTBE) to avoid the problems of lipid precipitation in frozen samples and to determine lipid profiles and metal species from the same batch. The nonextractable matrix, such as the debris, is removed by centrifugation and digested to determine the total metal content of the sample as well. Lipid profiling using RP-LC–MS demonstrated high accordance of the modified extraction method to the reference method, and the organic solvent does not affect the iron redox status equilibrium. Furthermore, rigorous testing demonstrated the stability of the iron redox status equilibrium during the extraction process, secured by complexation, inert atmosphere, fast preparation, and immediately deep frozen extracts.

Identification and Content of Astaxanthin and Its Esters from Microalgae Haematococcus pluvialis by HPLC-DAD and LC-QTOF-MS after Extraction with Various Solvents

Haematococcus pluvialis, a unicellular green microalga that produces a secondary metabolite under stress conditions, bears one of the most potent antioxidants, namely xanthophyll astaxanthin. The aim of our study was to determine the content of astaxanthin and its esterified forms using three different solvents—methyl tert-butyl ether (MTBE), hexane isopropanol (HEX -IPA) and acetone (ACE)—and to identify them by using high performance liquid chromatography coupled with diode array detection and the quadrupole time-of-flight mass spectrometry (HPLC-DAD and LC-QTOF-MS) technique. We identified eleven astaxanthin monoesters, which accounted for 78.8% of the total astaxanthin pool, six astaxanthin diesters (20.5% of total), while free astaxanthin represented the smallest fraction (0.7%). Astaxanthin monoesters (C16:2, C16:1, C16:0), which were the major bioactive compounds in the H. pluvialis samples studied, ranged from 10.2 to 11.8 mg g−1 DW. Astaxanthin diesters (C18:4/C18:3, C18:1/C18:3) were detected in the range between 2.3 and 2.6 mg g−1 DW. All three solvents were found to be effective for extraction, but MTBE and hexane-isopropanol extracted the greatest amount of free bioactive astaxanthin. Furthermore, MTBE extracted more low-chain astaxanthin monoesters (C16), and hexane-isopropanol extracted more long-chain monoesters (C18 and above) and more diesters. We can conclude that MTBE is the solvent of choice for the extraction of monoesters and hexane-isopropanol for diesters.

Exposure Profile to Traffic Related Pollution in Pediatric Age: A Biomonitoring Study

The aim of this study was to trace an exposure profile to traffic-derived pollution during pediatric age. For this purpose, two biomonitoring campaigns for the determination of urinary (u-) methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME), and diisopropyl ether (DIPE) were carried out in two different periods of the year (summer 2017 and winter 2018), among a large sample of healthy children (n = 736; 5–11 years old) living in rural and urban areas in central Italy. The quantification of u-MTBE, u-ETBE, u-TAME, and u-DIPE was performed by HS-SPME-GC/MS technique and information on participants was collected by a questionnaire. u-DIPE concentrations resulted always under the LOQ. u-TAME mean levels were similar in both seasons (18.7 ng L−1 in summer vs. 18.9 ng L−1 in winter), while u-MTBE and u-ETBE levels were, respectively, 69.9 and 423.5 ng L−1 (summer) and 53.3 and 66.2 ng L−1 (winter). Main predictors of urinary excretion resulted the time spent in motor vehicles, being male and younger.

Synthesis of fatty 1,2,4-trioxanes by peracetalisation of β-hydroxy hydroperoxides

The peracetalisation of a β-hydroxy hydroperoxide derived from methyl oleate was studied using benzaldehyde as a model substrate to give the corresponding fatty 1,2,4-trioxane. The desired product was obtained as a mixture of regioisomers but only one diastereoisomer of each was formed. The nature of the acid catalyst was studied and both para-toluene sulfonic acid (PTSA) and Amberlyst A35 (A35) were found to be efficient homogeneous and heterogeneous catalysts, respectively. The nature of the solvent was also investigated and ethereal solvents such as 2-methyltetrahydrofuran (2-MeTHF), methyl tert-butyl ether (MTBE) and cyclopentyl methyl ether (CPME) gave the best NMR yield (85%) for the preparation of the fatty trioxane. The optimized conditions were applied to a range of aromatic and aliphatic aldehydes and the corresponding 1,2,4-trioxanes were isolated with 30-91% yields (21 examples). The antimalarial activity of 3 trioxanes was studied against Plasmodium falciparum, however, no significant activity was detected (IC50 > 1600 nM).

HPLC-DAD-APCI-MS as a Tool for Carotenoid Assessment of Wild and Cultivated Cherry Tomatoes

Carotenoids are naturally occurring fat-soluble pigments found in many organisms. Because of their extensively conjugated carbon–carbon double bond system, carotenoids are potent antioxidants. Although the most abundant carotenoid and best singlet oxygen quencher found in red tomatoes is lycopene, carotenoid profiles may vary between genotypes. The objective of this work was to perform carotenoid profile indentification using HPLC-DAD-APCI-MS in ten wild cherry tomato accessions and one cultivated tomato. A mixture of hexane/acetone/ethanol (50:25:25) and 0.1% BHT was used for carotenoid extraction. For separation, a C30 column at 30 °C with a gradient consisting of methanol, methyl-tert-butyl ether, and water was used for their analysis. Ten major carotenoids were quantified within cherry tomato samples. All accessions present different profiles and quantities of carotenoids. Wild red tomatoes had more lycopene content that commercial tomato, whereas yellow tomatoes present no lycopene. From a functional viewpoint, higher concentrations of carotenoids that could play an antioxidant activity were measured from accessions IAC401, IAC426, LA1480, IAC391, and LA2692. This trait means that these germplasms may be targets for commercial activities. To the best of our knowledge, this is the first time that HPLC-DAD-APCI-MS has been used to analyze these accessions of wild cherry tomatoes that are both functionally promising and suitable for projects with social implementation at a local scale.