Study of charge carrier transport properties and lifetimes in HR GaAs:Cr with Timepix3

The response of a Timepix3 (256 × 256 pixels, pixel pitch 55 μm) detector with a 500 μm thick HR GaAs:Cr sensor was studied in proton beams of 125 MeV at the Danish Centre for Particle Therapy in Aarhus, Denmark and in a 120 GeV/c pion beam at the Super-Proton Synchrotron (SPS) at CERN. The sensor was biased at different voltages and irradiated at different angles. The readout chip was configured to operate in electron and hole collection modes. Measurements at grazing angles allowed to see elongated tracks with well-defined impact and exit points, so that charge carrier production depths could be determined in each pixel. We extracted the charge collection efficiencies and the charge carrier drift times as a function of the distance to the pixel plane. It was found that measured proton tracks are shorter in hole collection than in the case of electron collection, which is explained by the shorter lifetime of holes. At an angle of 60 degrees with respect to the sensor normal, the average track length in hole collection was ∼700 μm and 950 μm in electron collection mode. To understand the experimental findings, models describing the properties of HR GaAs:Cr were implemented into the Allpix2 simulation framework. We added previously presented experimental results describing the dependence of the electron drift velocity on the electric field and validated the response by comparing measurement and simulation for various X- and gamma-ray sources in the energy range of 10–60 keV. By comparison of the experimental and the simulated results, the mobility μ h and the lifetime of holes τ h were estimated as μ h = (320 ± 10) cm2/V/s and τ h = (4.5 ± 0.5) ns.

A novel non-adiabatic approach to transition crossing in a circular hadron accelerator

Crossing the transition energy is always a delicate process, representing a potential source of strong perturbations of the dynamics of charged particle beams in a hadron circular accelerator. Since the first generation of multi-GeV rings, intense studies have been devoted to understanding the possible harmful mechanisms involved in transition crossing and to devise mitigation measures. Nowadays, several circular particle accelerators are successfully operating across the transition energy and this process is well mastered. In a completely different context, stable resonances of the traverse phase space have been proposed as new means of manipulating charged particle beams. While the original aim of such a proposal was multi-turn extraction from the CERN Proton Synchrotron to the Super Proton Synchrotron, many more applications have been proposed and studied in detail. In this paper, the two topics, i.e. transition crossing and stable resonances, have been brought together with the goal of providing a novel and non-adiabatic approach to perform a clean transition crossing. The idea presented here is that by judiciously using sextupoles and octupoles it is possible to generate stable islands of the horizontal phase space. These islands represent a second closed orbit whose properties can be selected independently of those of the standard, i.e. central, closed orbit. This provides a means of performing a non-adiabatic change of the transition energy experienced by the charged particles by displacing the beam between the two closed orbits.

Omnidirectional Robotic Platform for Surveillance of Particle Accelerator Environments with Limited Space Areas

Intelligent robotic systems are becoming essential for inspections and measurements in harsh environments. This article presents the design of an omnidirectional robotic platform for tunnel inspection with spatial limitations. This robot was born from the need to automate the surveillance process of the Super Proton Synchrotron (SPS) accelerator of the European Organization for Nuclear Research (CERN), where there is remaining radiation. The accelerator is located within a tunnel that is divided by small doors of 400 × 200 mm dimensions, through which the robot has to cross. The designed robot brings a robotic arm, and the needed devices to carry out the inspection. Thanks to this design, the robot application may vary by replacing certain devices and tools. In addition, this paper presents the kinematic and dynamic control models for the robotic platform.

CERN-MEDICIS: A Review Since Commissioning in 2017

The CERN-MEDICIS (MEDical Isotopes Collected from ISolde) facility has delivered its first radioactive ion beam at CERN (Switzerland) in December 2017 to support the research and development in nuclear medicine using non-conventional radionuclides. Since then, fourteen institutes, including CERN, have joined the collaboration to drive the scientific program of this unique installation and evaluate the needs of the community to improve the research in imaging, diagnostics, radiation therapy and personalized medicine. The facility has been built as an extension of the ISOLDE (Isotope Separator On Line DEvice) facility at CERN. Handling of open radioisotope sources is made possible thanks to its Radiological Controlled Area and laboratory. Targets are being irradiated by the 1.4 GeV proton beam delivered by the CERN Proton Synchrotron Booster (PSB) on a station placed between the High Resolution Separator (HRS) ISOLDE target station and its beam dump. Irradiated target materials are also received from external institutes to undergo mass separation at CERN-MEDICIS. All targets are handled via a remote handling system and exploited on a dedicated isotope separator beamline. To allow for the release and collection of a specific radionuclide of medical interest, each target is heated to temperatures of up to 2,300°C. The created ions are extracted and accelerated to an energy up to 60 kV, and the beam steered through an off-line sector field magnet mass separator. This is followed by the extraction of the radionuclide of interest through mass separation and its subsequent implantation into a collection foil. In addition, the MELISSA (MEDICIS Laser Ion Source Setup At CERN) laser laboratory, in service since April 2019, helps to increase the separation efficiency and the selectivity. After collection, the implanted radionuclides are dispatched to the biomedical research centers, participating in the CERN-MEDICIS collaboration, for Research & Development in imaging or treatment. Since its commissioning, the CERN-MEDICIS facility has provided its partner institutes with non-conventional medical radionuclides such as Tb-149, Tb-152, Tb-155, Sm-153, Tm-165, Tm-167, Er-169, Yb-175, and Ac-225 with a high specific activity. This article provides a review of the achievements and milestones of CERN-MEDICIS since it has produced its first radioactive isotope in December 2017, with a special focus on its most recent operation in 2020.

Spectral index-flux relation for investigating the origins of steep decay in γ-ray bursts

Abstractγ-ray bursts (GRBs) are short-lived transients releasing a large amount of energy (1051 − 1053 erg) in the keV-MeV energy range. GRBs are thought to originate from internal dissipation of the energy carried by ultra-relativistic jets launched by the remnant of a massive star’s death or a compact binary coalescence. While thousands of GRBs have been observed over the last thirty years, we still have an incomplete understanding of where and how the radiation is generated in the jet. Here we show a relation between the spectral index and the flux found by investigating the X-ray tails of bright GRB pulses via time-resolved spectral analysis. This relation is incompatible with the long standing scenario which invokes the delayed arrival of photons from high-latitude parts of the jet. While the alternative scenarios cannot be firmly excluded, the adiabatic cooling of the emitting particles is the most plausible explanation for the discovered relation, suggesting a proton-synchrotron origin of the GRB emission.

Study of energy response and resolution of the ATLAS Tile Calorimeter to hadrons of energies from 16 to 30 GeV

Three spare modules of the ATLAS Tile Calorimeter were exposed to test beams from the Super Proton Synchrotron accelerator at CERN in 2017. The detector’s measurements of the energy response and resolution to positive pions and kaons, and protons with energies ranging from 16 to 30 GeV are reported. The results have uncertainties of a few percent. They were compared to the predictions of the Geant4-based simulation program used in ATLAS to estimate the response of the detector to proton-proton events at the Large Hadron Collider. The determinations obtained using experimental and simulated data agree within the uncertainties.