Manufacturing of Bellows Compensator by Pulsed-Magnetic Field Pressure

Bellows are a cylindrical shell with a corrugated part, widely used in aviation engineering as a movable sealing element to balance pressure and temperature differences, which ensure continuous and accurate system operation. The use of bellows expansion joints provides reliable and effective protection of pipelines from static and dynamic loads arising from deformations and vibration. Welded-edge bellows are a popular choice for regulating and controlling fuel supply in aircraft devices. The ability of the compensator to perceive deformations is determined by its assigned operating time, which describes how many cycles, and with what amplitude, the bellows compensator perceives without damage. A method for stamping bellows from tubular billets by using magnetic-pulse field in rigid dies, including sequential shaping of corrugations by distributing the internal magnetic pressure with axial movement of the free end of a tubular billet, characterized in that the material of the tubular billet for shaping corrugations is selected in accordance with its relative elongation.

Impact of Magnetic-Pulse and Chemical-Thermal Treatment on Alloyed Steels’ Surface Layer

The relevant problem is searching for up-to-date methods to improve tools and machine parts’ performance due to the hardening of surface layers. This article shows that, after the magnetic-pulse treatment of bearing steel Cr15, its surface microhardness was increased by 40–50% compared to baseline. In this case, the depth of the hardened layer was 0.08–0.1 mm. The magnetic-pulse processing of hard alloys reduces the coefficient of microhardness variation from 0.13 to 0.06. A decrease in the coefficient of variation of wear resistance from 0.48 to 0.27 indicates the increased stability of physical and mechanical properties. The nitriding of alloy steels was accelerated 10-fold that of traditional gas upon receipt of the hardened layer depth of 0.3–0.5 mm. As a result, the surface hardness was increased to 12.7 GPa. Boriding in the nano-dispersed powder was accelerated 2–3-fold compared to existing technologies while ensuring surface hardness up to 21–23 GPa with a boride layer thickness of up to 0.073 mm. Experimental data showed that the cutting tool equipped with inserts from WC92Co8 and WC79TiC15 has a resistance relative to the untreated WC92Co8 higher by 183% and WC85TiC6Co9—than 200%. Depending on alloy steel, nitriding allowed us to raise wear resistance by 120–177%, boriding—by 180–340%, and magneto-pulse treatment—by more than 183–200%.

Магнитно-импульсное деформирование сплава TiNi: эксперимент и расчет

Magnetic-pulse loading methods have been known since the 80s of the XX century and, as a rule, are used to determine the laws of destruction of materials under the action of pressure pulses with a duration of several microseconds. A modified scheme of a magnetic-pulse setup for high strain rate uniaxial tension is used in this work. The application of the scheme with the possibility of experimental measurement of the strain accumulation time and strain rate is shown on samples of TiNi alloy. The paper presents the results of finite element modeling and analytical description. Both approaches have demonstrated good agreement between the calculated residual strain and experimental results, even on samples of TiNi alloy with a specific stress-strain diagram. The analytical solution showed good qualitative agreement in assessing the strain accumulation time. On the basis of the analytical solution, an assessment of the capabilities of the magnetic-pulse loading method for uniaxial high strain rate tension is presented.

Specific features of thermal deforming of composite inductors during magnetic-pulse processing of materials

The problem of taking into account a non-stationary inhomogeneous temperature field in the analysis of the stress-strain state of inductor systems for magnetic-pulse processing of materials is considered. It follows from the analysis of open information sources that the problem of analyzing a non-stationary temperature field arising from the presence of a non-uniform electromagnetic field and its effect on deformation has been sufficiently studied in relation to induction heating. At the same time, during other operations of magnetic-pulse processing of materials, heating of equipment can cause additional deformations of a significant magnitude, which, in turn, can lead to a loss of equipment performance due to destruction or irreversible deformation. A general approach to the analysis of such problems is proposed, which involves the determination of the spatial-temporal distributions of the quantitative characteristics of the electromagnetic field, temperature field and stress-strain state. The necessity of using numerical methods for carrying out such an analysis has been substantiated. The most effective numerical method is the finite element method, which makes it possible to analyze the unsteady electromagnetic field, temperature field, and stress-strain state within the same calculation scheme. In this case, within the framework of the finite element method, iterative schemes can be created that allow taking into account nonlinear effects. Here, nonlinear effects can be due to the dependence of the mechanical and electro-physical properties of the material on temperature, the plastic nature of deformation, and the need to take into account contact phenomena. The results of complex analysis for a composite single-turn inductor with a dielectric band are presented. The features of contact interaction were taken into account by introducing layers of contact finite elements. The stress-strain state of the inductor is estimated for two variants of the materials used: copper and non-magnetic steel.

Heat generation in devices for magnetic-pulse processing of materials

The problem of analysis of non-stationary heat generation due to the flow of electric current in devices for magnetic-pulse processing of materials is considered. An analysis of the available information sources led to the conclusion that a large number of studies in this area are devoted to the study of heat transfer processes during technological operations of induction heating. In other technological operations of magnetic-pulse processing of materials, heat release is also significant. In this case, a non-stationary inhomogeneous temperature field can lead to significant temperature deformations. This, in turn, can cause a loss in the performance of the device due to destruction or irreversible deformation. Adequate modeling of non-stationary temperature propagation in this case is an obligatory step in carrying out computational analysis in the process of designing technological devices. A general strategy is proposed for determining the propagation of a non-stationary temperature field in the presence of a non-stationary non-uniform electromagnetic field. The proposed strategy presupposes a general solution of the problems of the propagation of the electromagnetic field and the temperature field within the framework of a unified design scheme. The use of the finite element method is proposed as a numerical method. The finite element method, when used in such problems, allows one to draw up iterative procedures that can be used to take into account the nonlinear effects associated with the influence of temperature on the electro-physical properties of materials. The problem of sequential determination of a non-stationary, non-uniform electromagnetic field and a non-stationary temperature field in composite matrices intended for electromagnetic pressing of powders of super-strong refractory materials is considered. The distribution of some quantitative characteristics of the electromagnetic field, as well as the dependence of temperature on time are presented.

Application and schemes of induction preliminary heating in magnetic-pulse treatment of metals

The features of the processes of magnetic-pulse processing of metals in traditional schemes of technological processes of modern industrial production are highlighted. The work is a brief description of the state, application, and also proposed induction pre-heating schemes in industrial magnetic-pulse processing of metals. A method for increasing the efficiency of performing specified production operations is considered. The use of preheating leads to a significant improvement in the quality of production operations while reducing energy consumption. New directions of magnetic-pulse processing of metals are noted, implying the transformation of the natural repulsive forces of the metal of the processed object into the forces of magnetic-pulse attraction with a decrease in the operating frequencies of the acting fields. A significant decrease in operating frequencies makes it possible not only to go from repulsion to attraction, but also to go from working with ferromagnetic metals to non-ferromagnetic ones. For example, it becomes possible to attract aluminum blanks. Examples of the use of induction heating of metal blanks in modern industry are given. Various devices used for these operations, offered on the modern market, by both domestic and foreign manufacturers, are considered. The physics of Lenz-Joule heat release is described, the result of which is the induction heating of conductors by Foucault currents in the external electromagnetic field of the instrument. Schemes are proposed for the practical implementation of preliminary induction heating during magnetic-pulse processing of metal blanks, allowing the use of both autonomous devices for exciting eddy currents and a stationary connection, for the same purpose, of an additional source of electricity. As a result of the work, the possibility of increasing the efficiency by increasing the plasticity of the metal when heating the workpiece, as well as possible limitations of the described technology associated with an increase in the active resistance of metals with an increase in the Lenz-Joule heat release is noted.

Application of intelligently controlled technologies in designing of technological processes for explosive forming of shell parts

The object of research is the processes of pulse metalworking (hydroexplosive, magnetic pulse, electrohydraulic, gas detonation forming, etc.). Among these methods of forming for the production of aircrafts engines parts from cylindrical and conical blanks, the most efficient in terms of its energy capabilities and overall dimensions is explosive. The modern level of theory and practice of metal forming processes allows, on the basis of a systematic approach and control theory, to determine the optimal parameters of plastic forming processes, select the best technical solutions, and create a precondition for the transition to complex automation. The most difficult task of metals forming methods optimizing is to find the best solution among many potentially possible ones, considering the introduced restrictions and efficiency criteria, environmental, economic, technical, ergonomic, and other requirements. The most problematic is that it is impossible to optimize the process of forming post-factum (finishing works, elimination of defects in shape and size, welding of cracks, etc. are required), therefore, when solving optimization problems, the implementation of the feedback principle is required - comparison of the value of the controlled variable, determined by the control program, with the desired value. In general, the processes of metal forming by pressure are characterized by a variety of problems of the theory of optimal control, the solution of which is carried out by methods of mathematical programming. And, although the equipment for pulse processing can have a different design, it necessarily includes structural elements that make it possible to convert the energy of the source and with its help (through the action of a solid body, transmitting medium, or field) to deform the metal of the workpiece. Due to this, in this work, it is proposed to control the quality of the obtained parts by varying the degree of deformation of the workpiece in the process of forming. The result of the work is the development of an integrated intelligent system, with the help of which it is possible to carry out the computer-aided design of almost all pulse-action processes based on the intelligent selection of suitable forming parameters.

An Efficient Computational Model for Magnetic Pulse Forming of Thin Structures

Electromagnetic forming (EMF) is one of the most popular high-speed forming processes for sheet metals. However, modeling this process in 3D often requires huge computational time since it deals with a strongly coupled multi-physics problem. The numerical tools that are capable of modeling this process rely either on shell elements-based approaches or on full 3D elements-based approaches. The former leads to reduced computational time at the expense of the accuracy, while the latter favors accuracy over computation time. Herein, a novel approach was developed to reduce CPU time while maintaining reasonable accuracy through building upon a 3D finite element analysis toolbox which was developed in CEMEF. This toolbox was used to solve magnetic pulse forming (MPF) of thin sheets. The problem was simulated under different conditions and the results were analyzed in-depth. Innovative techniques, such as developing a termination criterion and using adaptive re-meshing, were devised to overcome the encountered problems. Moreover, a solid shell element was implemented and tested for thin structure problems and its applicability was verified. The results of this element type were comparable to the results of the standard tetrahedral MINI element but with reduced simulation time.