Exploring in vitro release and digestion of commercial DHA microcapsules from algae oil and tuna oil with whey protein and casein as wall materials

Microencapsulation is a promising technique to improve bioavailability and mask unpleasant smell of DHA oils. Yet, how the encapsulated DHA oils are ‘released’ and ‘digested’ within the gastrointestinal tract (GIT)...

Reaction of Sulfur and Sustainable Algae Oil for Polymer Synthesis and Enrichment of Saturated Triglycerides

There is growing interest in the bio-based production of lipids from algae. These lipids have a range of uses including nutritional supplements and precursors to biodiesel. Single-cell thraustochytrids are especially attractive in this regard in that they can produce over 50% of their weight as triglycerides. Furthermore, the distribution of saturated and unsaturated triglycerides can be modulated by changes in strain variation and modulation of fermentation conditions. Nonetheless, there remains a need for versatile downstream processing to enrich these so-called “single cell oils” into classes based on degree of unsaturation. In this study, we report a novel strategy for enriching saturated triglycerides produced in thraustochytrids. The method features direct reaction of elemental sulfur with the algae oil extract. The sulfur copolymerizes with >90% of the unsaturated triglycerides, providing a new route to a class of materials previously used in environmental remediation, Li-S battery cathodes, slow-release fertilisers, and insulation. The unreacted oil is enriched in saturated triglycerides, which can be isolated by extraction for potential use in biodiesel production. In this way, a single batch of sustainably produced algae oil can be converted into multiple useful products in a single step.

Synthesis and Characterization of Polyurethanes from Residual Palm Oil with High Poly-Unsaturated Fatty Acid Oils as Additive

In the effort to produce renewable and biodegradable polymers, more studies are being undertaken to explore environmentally friendly sources to replace petroleum-based sources. The oil palm industry is not only the biggest vegetable-oil producer from crops but also one the biggest producers of residual oil that cannot be used for edible purposes due to its low quality. In this paper the development of biopolymers from residual palm oil, residual palm oil with 10% jatropha oil, and residual palm oil with 10% algae oil as additives were explored. Polyols from the different oils were prepared by epoxydation with peroxyacetic acid and alcoholysis under the same conditions and further reacted with poly isocyanate to form polyurethanes. Epoxidized oils, polyols and polyurethanes were analyzed by different techniques such as TGA, DSC, DMA, FTIR and H-NMR. Overall, although the IV of algae oil is slightly higher than that of jatropha oil, the usage of algae oil as additive into the residual palm oil was shown to significantly increase the hard segments and thermal stability of the bio polyurethane compared to the polymer with jatropha oil. Furthermore, when algae oil was mixed with the residual palm oil, it was possible to identify phosphate groups in the polyol which might enhance the fire-retardant properties of the final biopolymer.

Docosahexaenoic acid-rich algae oil supplementation on breast milk fatty acid profile of mothers who delivered prematurely: a randomized clinical trial

Preterm infants are deficient in long-chain polyunsaturated fatty acids, especially docosahexaenoic acid (DHA), a fatty acid (FA) associated with an increase in bronchopulmonary dysplasia (BPD). In two previous randomized control trials, DHA supplementation did not reduce the risk of BPD. We examined the breast milk FA profile, collected 14 days after birth, of mothers who delivered before 29 weeks of gestation and who were supplemented with DHA-rich algae oil or a placebo within 72 h after birth as part of the MOBYDIck trial. Milk FA were analyzed by gas chromatography. The total amount of FA (mg/mL) was similar in both groups but the supplementation increased DHA (expressed as % of total FA, mean ± SD, treatment vs placebo, 0.95 ± 0.44% vs 0.34 ± 0.20%; P < 0.0001), n-6 docosapentaenoic acid (DPA) (0.275 ± 0.14% vs 0.04 ± 0.04%; P < 0.0001) and eicosapentaenoic acid (0.08 ± 0.08% vs 0.07 ± 0.07%; P < 0.0001) while decreasing n-3 DPA (0.16 ± 0.05% vs 0.17 ± 0.06%; P < 0.05). Supplementation changed the ratio of DHA to arachidonic acid (1.76 ± 1.55% vs 0.60 ± 0.31%; P < 0.0001) and n-6 to n-3 FA (0.21 ± 0.06% vs 0.17 ± 0.04%; P < 0.0001). DHA-rich algae supplementation successfully increased the DHA content of breast milk but also included secondary changes that are closely involved with inflammation and may contribute to changing clinical outcomes.

Environmental Emission Analysis of Biodiesel with Al2O3 Nanometal Additives as Fuel in a Diesel Engine

The exploitation of fossil fuels has fueled the modern world’s development since the industrial revolution. Other energy sources, such as wood, charcoal, and animal power, were displaced by these fuels, which were relatively easy to obtain, had low cost of production, and were easily transportable. The possibility of these fossil reserves being depleted in the medium term, combined with an increase in environmental awareness and the reality of environmental degradation, has changed the situation, reactivating the search for alternative fuels. Biofuels such as bioethanol, biomethanol, and biodiesel are among the alternative fuels gaining popularity due to their environmental benefits. This research investigates the behaviour of a diesel engine that runs on biodiesel (a fuel made from new and unrefined algae oil), ethanol (an essential raw nanomaterial that is readily available in India), and nanometal additives.