Sustainable Materials Production for Oily Wastewater Treatment

The discharge of water from oil fields It has become one of the most significant environmental concerns associated with the oil sector. Hydrocarbon spills and crude oil fuel spills are a continual hazard to aquatic ecosystems. Inexpensive and sustainable sorbent materials are needed to mitigate the environmental damage of this pollution. To meet this need, this study features a low-density polysulfide polymer prepared by Sulfur and used cooking oils react directly. Since both sulfur and cooking oils are hydrophobic, the polymer is close to hydrocarbons such as crude oil and diesel fuel and can easily remove them from seawater. Oil can be recovered and polymer can be reused in oil spill treatment. Polysulfide is unique in that it is prepared from completely recycled waste. Sulfur is a by-product of the petroleum industry, and used cooking oil can also be used as a raw material. Therefore, waste sulfur from the petroleum industry is used to make effective anti-pollution adsorbents from the same sector According to the study’s findings, 98.55 percent of the oil was removed from the north.

Coco Peat as Agricultural Waste Sorbent for Sustainable Diesel-Filter System

Oil spill incidents are hazardous and have prolonged damage to the marine environment. Management and spill clean-up procedures are practical and rapid, with several shortcomings. Coco peat (CP) and coco fibre (CF) are refined from coconut waste, and their abundance makes them desirable for diesel spillage treatment. Using a filter-based system, the selectivity of coco peat sorbent was tested using CP, CF and peat-fibre mix (CPM). CP exhibited maximal diesel sorption capacity with minimal seawater uptake, thus being selected for further optimisation analysis. The heat treatment considerably improved the sorption capacity and efficiency of diesel absorbed by CP, as supported by FTIR and VPSEM–EDX analysis. Conventional one-factor-at-a-time (OFAT) examined the performance of diesel sorption by CP under varying parameters, namely temperature, time of heating, packing density and diesel concentration. The significant factors were statistically evaluated using response surface methodology (RSM) via Plackett–Burman design (PB) and central composite design (CCD). Three significant (p < 0.05) factors (time, packing density and diesel concentration) were identified by PB and further analysed for interactions among the parameters. CCD predicted efficiency of diesel absorbed at 59.92% (71.90 mL) (initial diesel concentration of 30% v/v) and the experimental model validated the design with 59.17% (71.00 mL) diesel sorbed at the optimised conditions of 14.1 min of heating (200 °C) with packing density of 0.08 g/cm3 and 30% (v/v) of diesel concentration. The performance of CP in RSM (59.17%) was better than that in OFAT (58.33%). The discoveries imply that natural sorbent materials such as CP in oil spill clean-up operations can be advantageous and environmentally feasible. This study also demonstrated the diesel-filter system as a pilot study for the prospective up-scale application of oil spills.

Management of mining wastes through their transformation into useful sorbent

Abstract Every year a few hundred million or so tons of industrial waste are generated all over Europe. A considerable share is attributable to exploratory wastes from the mining sector and combustion byproducts. The process of their reprocessing and utilization fits into the following rules subject to intensive development, viz.: zero waste economy (Zero Waste Europe), effective use of resources (Resource Efficient Europe) as well as closed-circuit economy (Circular Economy). The article shows some research results to corroborate the concept of industrial waste processing of carbonaceous shales into sorbent materials. The applied process of carbonaceous shale calcination led to the obtaining of a material containing metakaolinite, then used in the synthesis of zeolites. The specific surface of the sorbent obtained in the aforesaid way exceeded 100 m2/g.

Global potential for harvesting drinking water from air using solar energy

Access to safely managed drinking water (SMDW) remains a global challenge, and affects 2.2 billion people1,2. Solar-driven atmospheric water harvesting (AWH) devices with continuous cycling may accelerate progress by enabling decentralized extraction of water from air3–6, but low specific yields (SY) and low daytime relative humidity (RH) have raised questions about their performance (in litres of water output per day)7–11. However, to our knowledge, no analysis has mapped the global potential of AWH12 despite favourable conditions in tropical regions, where two-thirds of people without SMDW live2. Here we show that AWH could provide SMDW for a billion people. Our assessment—using Google Earth Engine13—introduces a hypothetical 1-metre-square device with a SY profile of 0.2 to 2.5 litres per kilowatt-hour (0.1 to 1.25 litres per kilowatt-hour for a 2-metre-square device) at 30% to 90% RH, respectively. Such a device could meet a target average daily drinking water requirement of 5 litres per day per person14. We plot the impact potential of existing devices and new sorbent classes, which suggests that these targets could be met with continued technological development, and well within thermodynamic limits. Indeed, these performance targets have been achieved experimentally in demonstrations of sorbent materials15–17. Our tools can inform design trade-offs for atmospheric water harvesting devices that maximize global impact, alongside ongoing efforts to meet Sustainable Development Goals (SDGs) with existing technologies.

Behavior of KCl sorbent traps and KCl trapping solutions used for atmospheric mercury speciation: stability and specificity

Atmospheric mercury speciation is of paramount importance for understanding the behavior of mercury once it is emitted into the atmosphere as gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM) and particulate-bound mercury (PBM). GOM and PBM can also be formed in the atmosphere; their sampling is the most problematic step in the atmospheric mercury speciation. GOM sampling with speciation traps composed of KCl sorbent materials and KCl trapping solutions are commonly used sampling methods, although the research conducted with them at ambient air concentrations is limited. The results of the specificity test demonstrated that the KCl sorbent traps are highly specific when using new traps, while their specificity drops dramatically when they are reused. The results of the stability test indicated that the highest Hg2+ losses (up to 5.5 % of Hg2+ loss) occur when low amounts of Hg2+ (< 1 ng) are loaded, due to a reduction of Hg2+ to Hg0. KCl trapping solutions have also been considered as a selective trapping media for GOM in atmospheric samples. A dimensionless Henry law constant was experimentally derived and was used to calculate the solubility of elemental Hg in KCl solution. The degree of GEM oxidation was established by purging elemental Hg calibration gas into a KCl solution and determining the GOM trapped using aqueous-phase propylation liquid–liquid extraction and gas chromatography–atomic fluorescence spectrometry (GC-AFS) measurement. A positive GOM bias was observed due to the solubility and oxidation of GEM in KCl trapping solutions, strongly suggesting that this approach is unsuitable for atmospheric mercury speciation measurements.

The fascinating world of mayenite (Ca12Al14O33) and its derivatives

Mayenite (12CaO·7Al2O3) is a mesoporous calcium aluminum oxide, with a characteristic crystalline structure. The framework of mayenite is composed of interconnected cages with a positive electric charge per unit cell that includes two molecules [Ca24Al28O64]4+, and the remaining two oxide ions O2−, often labelled “free oxygen”, are trapped in the cages defined by the framework. Starting from mayenite structure several derivatives have been prepared through advanced synthetic protocols by free oxygen substitution with various anions. Mayenite and its derivates have been intensively investigated in many applications which include catalysis (oxidation and reduction, ammonia synthesis, pinacol coupling), environmental sensors and CO2 sorbent materials. In this review, we summarize our recent results on the main applications of mayenite and its derivatives.

Analytical Extraction Methods and Sorbents’ Development for Simultaneous Determination of Organophosphorus Pesticides’ Residues in Food and Water Samples: A Review

Extensive use of organophosphorus pesticides in agriculture leads to adverse effects to the environment and human health. Sample preparation is compulsory to enrich target analytes prior to detection as they often exist at trace levels and this step is critical as it determines the concentration of pollutants present in samples. The selection of a suitable extraction method is of great importance. The analytical performance of the extraction methods is influenced by the selection of sorbents as sorbents play a vital role in the sensitivity and selectivity of an analytical method. To date, numerous sorbent materials have been developed to cater to the needs of selective and sensitive pesticides’ detection. Comprehensive details pertaining to extraction methods, developed sorbents, and analytical performance are provided. This review intended to provide a general overview on different extraction techniques and sorbents that have been developed in the last 10 years for organophosphorus pesticides’ determinations in food and water samples.

A review on oil spill clean-up using bio-sorbent materials with special emphasis on utilization of kenaf core fibers

Thousands of oil spill incidents regrettably have occurred on a daily basis around the globe. Oil spills are a form of pollution that poses major catastrophic threats to marine ecosystems. Oil spill incidents commonly occur in the middle of the ocean, and the process to remove the oil becomes a great challenge. Absorbents, due to their good oil-absorbing characteristics, are becoming more popular nowadays as one of the effective oil spill clean-up methods. Among the many types of oil absorbents, plant fibers were also being studied to remove the oil spills from the sea surface. This paper reviews factors leading to oil spills, the detrimental effect of the oil spill on the environment, the oil spill removal methods, and the application of plant fibers as oil absorbent material. The paper also will highlight the latest development on the utilization of kenaf core fibers as oil-absorbent material and the use of oil absorbed kenaf core fibers as fuel briquette by taking advantage the high calorific value of the oil spill.