Improving the cold quark-matter pressure via soft interactions at N3LO

The propagation of long-wavelength gluons through a dense QCD medium at high baryon chemical potential μB is qualitatively modified by the effects of screening, arising from scatterings off the high-momentum quarks in the medium. This same screening phenomenon also impacts gluons occurring in loop corrections to the pressure of cold quark matter, leading to contributions from the parametric scale αs1/2μB, starting at next-to-next-to-leading order (N2LO) in the strong coupling constant αs. At next-to-next-to-next-to-leading order (N3LO), interactions between these long-wavelength gluonic modes contribute to the pressure. These interaction corrections have recently been computed in Ref [1, 2], and the inclusion of these interactions slightly improves the convergence of the equation of state of cold quark matter. In these proceedings, we present these results and provide details summarizing how this lengthy calculation was performed.

Tension testing of additively manufactured specimens of 17-4 PH processed by Bound Metal Deposition

In contrast to the traditional ways of subtractive manufacturing, additive manufacturing (AM), also known as 3D printing, adapts computer-aided design to iteratively build the component or part layer by layer. The technology has recently gained a high momentum, both within academia, but also within the industrial sector. However, it is common that parts produced by AM will have more defects than parts produced by traditional methods. The objective of this paper is to investigate a new method of additive manufacturing, namely the bound metal deposition method (BMD). This method seemed promising from the perspective that the metal is not iteratively being melted, similar to such as welding. In fact, the part is first printed, then washed, for then to be sintered. Consequently, avoiding the complex thermal histories/cycles. It was found that the material will exhibit anisotropic behaviour, and have a mesh of crack like defects, related to the printing orientation.

Assessment of Dynamic High Momentum Slug Loads on Piping Following STHE Tube Rupture

Transient fluid loads in process piping have gained renewed focus recently with the design and construction of many LNG plants. The case of the shockwave (waterhammer) in piping following the rupture of a tube in a STHE has been well studied. Less attention has been paid to the high momentum slug flow which can occur when liquid slugs are accelerated in the piping by the gas. This paper will examine some of the practical considerations for assessing the dynamic loads resulting from this high momentum slug flow. A method to obtain the force vector for any 3-dimensional change in direction will be presented. The use of DLFs for loads where a detailed time history profile is available will be discussed. The possibility of taking credit for simultaneously acting forces will be investigated. The applicability of the B31.3 allowable stress for occasional loads will be examined and compared against advanced finite element models using shell elements.

Influence of Opposing Dilution Jets on Effusion Cooling

The gas turbine combustion process reaches gas temperatures that exceed the melting temperature of the combustor liner materials. Cooling the liner is critical to combustor durability and is often accomplished with double-walled liners that contain both impingement and effusion holes. The liner cooling is complicated with the interruption of the effusion cooling by large dilution jets that facilitate the combustion process. Given the presence of the dilution jets, it is important to understand the effect that the dilution jet has on the opposing wall in respect to the effusion film. This research includes measurements of the local static pressure distribution for a range of dilution jet momentum flux ratios to investigate the impact that the opposing dilution jet has on the effusion film. The interactions with the effusion cooling were also evaluated by measuring the overall cooling effectiveness across the panel. Measurements show that the opposing dilution jets did impact the liner at dilution jet momentum flux ratios that were greater than 20. The impacts at high momentum flux ratios were indicated through increased local static pressures measured on the surface of the combustor liner. Furthermore, the dilution touchdown decreased the overall cooling effectiveness of the effusion cooling. Results also indicated that the opposing dilution jets changed position on the liner as the dilution jet momentum flux ratio changes.

On secondary atomization and blockage of surrogate cough droplets in single- and multilayer face masks

Face masks prevent transmission of infectious respiratory diseases by blocking large droplets and aerosols during exhalation or inhalation. While three-layer masks are generally advised, many commonly available or makeshift masks contain single or double layers. Using carefully designed experiments involving high-speed imaging along with physics-based analysis, we show that high-momentum, large-sized (>250 micrometer) surrogate cough droplets can penetrate single- or double-layer mask material to a significant extent. The penetrated droplets can atomize into numerous much smaller (<100 micrometer) droplets, which could remain airborne for a significant time. The possibility of secondary atomization of high-momentum cough droplets by hydrodynamic focusing and extrusion through the microscale pores in the fibrous network of the single/double-layer mask material needs to be considered in determining mask efficacy. Three-layer masks can effectively block these droplets and thus could be ubiquitously used as a key tool against COVID-19 or similar respiratory diseases.