residual carbon
Recently Published Documents


TOTAL DOCUMENTS

237
(FIVE YEARS 54)

H-INDEX

27
(FIVE YEARS 5)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Syed Kamran Haider ◽  
Dongsoo Kim ◽  
Young Soo Kang

AbstractComplete recycling of Nd2Fe14B sludge by chemical methods has gained significance in recent years, however, it is not easy to recycle highly contaminant sludge and obtain product with good magnetic properties. Herein we report a simple four-step process to recycle the Nd2Fe14B sludge containing ~ 10% of contaminants. Sludge was leached in H2SO4 and selectively co-precipitated in two steps. In the first co-precipitation, Al3+ and Cu2+ were removed at pH 6. Thereafter, in the second co-precipitation Fe2+ and RE3+ sulfates were converted to the Fe and RE hydroxides. By annealing at 800 °C RE and Fe hydroxides precipitates were converted to the oxides and residual carbon was oxidized to CO2. After the addition of boric acid, Fe and RE oxides were reduced and diffused to the (Nd-RE)2Fe14B by calciothermic reduction diffusion. Removal of CaO by washing with D.I. water in glove box reduced the oxygen content (~ 0.7%), improved crystallinity and enhanced the magnetic properties significantly. Coercivity increased more than three times (from 242.71 to 800.55 kA/m) and Mr value was also enhanced up to more than 20% (from 0.481 to 0.605 T). In this green process Na2SO4 and Ca(OH)2 were produced as by-product those are non-hazardous and were removed conveniently.


Molecules ◽  
2021 ◽  
Vol 26 (20) ◽  
pp. 6116
Author(s):  
Yixin Zhang ◽  
Rumeng Wang ◽  
Guofeng Qiu ◽  
Wenke Jia ◽  
Yang Guo ◽  
...  

A large amount of coal gasification slag is produced every year in China. However, most of the current disposal is into landfills, which causes serious harm to the environment. In this research, coal gasification fine slag residual carbon porous material (GFSA) was prepared using gasification fine slag foam flotation obtained carbon residue (GFSF) as raw material and an adsorbent to carry out an adsorption test on waste liquid containing methylene blue (MB). The effects of activation parameters (GFSF/KOH ratio mass ratio, activation temperature, and activation time) on the cation exchange capacity (CEC) of GFSA were investigated. The total specific surface area and pore volume of GSFA with the highest CEC were 574.02 m2/g and 0.467 cm3/g, respectively. The degree of pore formation had an important effect on CEC. The maximum adsorption capacity of GFSA on MB was 19.18 mg/g in the MB adsorption test. The effects of pH, adsorption time, amount of adsorbent, and initial MB concentration on adsorption efficiency were studied. Langmuir isotherm and quasi second-order kinetic model have a good fitting effect on the adsorption isotherm and kinetic model of MB.


Catalysts ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1142
Author(s):  
Yang Guo ◽  
Jianjun Wu ◽  
Wenke Jia ◽  
Fanhui Guo ◽  
Guofeng Qiu ◽  
...  

The conversion of solid waste into energy through combustion is sustainable and economical. This study aims to comprehensively evaluate and quantify the co-combustion characteristics, synergistic catalysis, and gaseous pollutant emission patterns of sewage sludge (SS) and coal gasification fine slag residual carbon (RC) as well as their blends through thermogravimetry coupled with mass spectrometry (TG-MS). The results showed that the co-combustion of SS and RC can not only improve the ignition and burnout property but also maintain the combustion stability and comprehensive combustion performance at a better level. The kinetic analysis results showed that a first-order chemical reaction and three-dimensional diffusion are the reaction mechanisms during the co-combustion of SS and RC. The synergistic catalysis between SS and RC can well explain the changes in activation energy and reaction mechanism. Furthermore, the blending ratio of SS is recommended to be maintained at 40% because of the lowest activation energy (Ea = 81.6 kJ/mol) and the strongest synergistic effect (Xi = 0.36). The emission of gaseous pollutants is corresponding to the primary combustion stages of SS, RC, and their blends. In co-combustion, the NH3, HCN, NOx, and SO2 emissions gradually rise with the increase of SS proportion in the blends due to the high content of organic compounds in SS.


Sign in / Sign up

Export Citation Format

Share Document