Structure and Crystallization of High-Calcium, CMAS Glass Ceramics Synthesized with a High Content of Slag

In this work, more than 70 wt % of ferromanganese slag (containing 40 wt % CaO) was used to synthesize high-calcium, CaO-MgO-Al2O3-SiO2 (CMAS) glass ceramics. The effect of SiO2/CaO on the structure, crystallization behavior and microstructure of high-calcium, CMAS, slag glass ceramics was studied by IR, NMR, DSC, XRD and SEM. The results showed that in the high-calcium, CMAS glass ceramics, the main existing forms of silicon–oxygen tetrahedra (Qn) were Q0 and Q1. With the increase in the SiO2/CaO, Qn changed from Q0 and Q1 (main units) to Q1 (main units) and Q2, and then to Q1 and Q2 (main units). The polymerization degree of Qn changed from low to high, making the glass more stable, which led to the increase in crystallization temperature and the decrease in crystallization kinetic constant (k) and frequency factor (υ). At the same time, the change in the Qn structure resulted in a gradual change to the main crystal, from akermanite to diopside–wollastonite.

Stab resistance of flexible composite reinforced with warp-knitted fabric like scale structure at quasi-static loading

The stab-resistant fabric like scale structure has a promising application prospect for areas of stab prevention owing to its great flexibility and excellent stab-resistance performance. In this paper, a kind of novel stab-resistant fabric has been designed by coating with epoxy resin (ER) and silicon carbide (SiC) particles, which was based on the warp-knitted fabric like scale structure (WKFS). The uniformity of dispersion has been investigated with different diameter and mass fraction of SiC, and polymerization degree of polyglycols (PEG); the flexibility and quasi-static properties of different kinds of WKFS treated with different coating solution has been studied, and the coating solution was prepared by mixing SiC particles and ER at different ratios. The results showed that the dispersion uniformity of the dispersion was the best when the diameter of SiC is 1 μm, the content is 50%, and the polymerization degree of PEG is 600. The longitudinal flexibility of the stab-resistant fabric is greater than that of transverse due to the gap between the longitudinal scales, and the addition of SiC particles can increase the transverse and longitudinal flexibility of stab-resistant fabric, and the flexible properties were the greatest when SiC:ER = 50:30. In addition, the WKFS treated with SiC of 16.7% has fatigue resistance; the damage mechanism of the fabric treated with pure ER is thankful to the brittleness of the resin; the added SiC particles hinder the further crack propagation of the resin, and the failure mode is mainly in stretch.

The use of chitosan as a skin-regeneration agent in burns injuries: A review

Chitosan is an amino-polysaccharide, traditionally obtained by the partial deacetylation of chitin from exoskeletons of crustaceans. Properties such as biocompatibility, hemostasis, and the ability to absorb physiological fluids are attributed to this biopolymer. Chitosan’s biological properties are regulated by its origin, polymerization degree, and molecular weight. In addition, it possesses antibacterial and antifungal activities. It also has been used to prepare films, hydrogels, coatings, nanofibers, and absorbent sponges, all utilized for the healing of skin wounds. In in vivo studies with second-degree burns, healing has been achieved in at least 80% of the cases between the ninth and twelfth day of treatment with chitosan coatings. The crucial steps in the treatment of severe burns are the early excision of damaged tissue and adequate coverage to minimize the risk of infection. So far, partial-thickness autografting is considered the gold standard for the treatment of full-thickness burns. However, the limitations of donor sites have led to the development of skin substitutes. Therefore, the need for an appropriate dermal equivalent that functions as a regeneration template for the growth and deposition of new skin tissue has been recognized. This review describes the properties of chitosan that validate its potential in the treatment of skin burns.

Effect of Electrolytic Manganese Residue in Fly Ash-Based Cementitious Material: Hydration Behavior and Microstructure

Electrolytic manganese residue (EMR) is a solid waste with a main mineralogical composition of gypsum. It is generated in the production of metal manganese by the electrolysis process. In this research, EMR, fly ash, and clinker were blended to make fly ash-based cementitious material (FAC) to investigate the effect of EMR on strength properties, hydration behavior, microstructure, and environmental performance of FAC. XRD, TG, and SEM studied the hydration behavior of FAC. The pore structure and [SiO4] polymerization degree were characterized by MIP and 29Si NMR, respectively. The experimental results indicate that FAC shows excellent mechanical properties when the EMR dosage is 10%. Moderate content of sulfate provided by EMR can promote hydration reaction of FAC, and it shows a denser pore structure and higher [SiO4] polymerization degree in this case. Heavy metal ions derived from EMR can be adsorbed in the hydration products of FAC to obtain better environmental properties. This paper presents an AFt covering model for the case of excessive EMR in FAC, and it importantly provides theoretical support for the recycling of EMR in cementitious materials.

Epsilon-poly-L-lysine: Recent Advances in Biomanufacturing and Applications

ε-poly-L-lysine (ε-PL) is a naturally occurring poly(amino acid) of varying polymerization degree, which possesses excellent antimicrobial activity and has been widely used in food and pharmaceutical industries. To provide new perspectives from recent advances, this review compares several conventional and advanced strategies for the discovery of wild strains and development of high-producing strains, including isolation and culture-based traditional methods as well as genome mining and directed evolution. We also summarize process engineering approaches for improving production, including optimization of environmental conditions and utilization of industrial waste. Then, efficient downstream purification methods are described, including their drawbacks, followed by the brief introductions of proposed antimicrobial mechanisms of ε-PL and its recent applications. Finally, we discuss persistent challenges and future perspectives for the commercialization of ε-PL.

Rapid Evaluation of the Pozzolanic Activity of Bayer Red Mud by a Polymerization Degree Method: Correlations with Alkali Dissolution of (Si+Al) and Strength

A large amount of Bayer process red mud is discharged in the process of alumina production, which has caused significant pollution in the environment. The pozzolanic activity of Bayer red mud as a supplementary cementitious material is a research hotspot. In this work, a new method for Fourier-transform infrared spectrometry is used to determine the polymerization degree of Bayer red mud in order to evaluate its pozzolanic activity. Based on the results of the dissolution concentration of (Si+Al), strength index and polymerization degree of Bayer red mud, the relationships between different evaluation methods were analyzed, and the relevant calculation formulas of pozzolanic activity were obtained. The results showed that different evaluation methods can reflect the variation law of pozzolanic activity in Bayer red mud. The polymerization degree of Bayer red mud had a good linear relationship with the pozzolanic activity index obtained by the strength index and dissolution concentration of (Si+Al), respectively. The polymerization degree was negatively correlated with pozzolanic activity index and dissolution concentration of (Si+Al), and the correlation coefficients were greater than 0.85. Therefore, this method was found to be effective and hence can be used as a rapid and simple test for pozzolanic activity evaluation of Bayer red mud.