electromagnetic simulation
Recently Published Documents


TOTAL DOCUMENTS

601
(FIVE YEARS 108)

H-INDEX

25
(FIVE YEARS 3)

2021 ◽  
Author(s):  
Xuguang Min ◽  
Xikai Xia ◽  
Shengtong Zhou ◽  
Feixia Luo

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Tangyao Xie ◽  
Jianguo Yu ◽  
Yao Li ◽  
Zhen Yu ◽  
Ziheng Lin

This study proposes and designs a multiband branch antenna with a structure that imitates the Chinese classical pattern structure. The antenna radiator’s structure is a symmetrical rectangular stub fused with a Chinese classical pattern structure, and the rectangular stub is bent so that the outer and inner stubs are coupled to each other to generate multiple frequency bands. Microstrip line feeding is the feeding mode, and the grounding plate is a trapezoidal structure formed by subtracting two triangles from a rectangle. The overall size of the antenna is 60 × 60 × 1.6 mm3, and the dielectric board adopts FR4. The substrate dielectric constant εr = 4.4, the thickness h = 1.6 mm, and the dielectric loss tangent tanδ = 0.02. For antenna modeling and parameter optimization, HFSS electromagnetic simulation software is used. The antenna can cover 1.49 to 1.60 GHz, 1.87 to 2.51 GHz, and 4.63 to 5.34 GHz and generate three main frequencies: 1.57, 2.15, and 5.06 GHz, according to test result. The antenna has omnidirectional radiation characteristics and can be widely used in future mobile communication network coverage.


2021 ◽  
Author(s):  
Noa Betzalel ◽  
Paul Ben Ishai ◽  
Alexander Puzenko ◽  
Yuri Feldman

Abstract Recently published Radiometric measurements of human subjects in the frequency range 480-700 GHz, demonstrate the emission of blackbody radiation from the body core, rather than the skin surface. We present a detailed electromagnetic simulation of the dermis and epidermis, taking into account the presence of the sweat duct. This complex structure can be considered as an electromagnetic bio-metamaterial, whereby the layered structure, along with the topology of the sweat duct, reveals a complex interference pattern in the skin. The model is capable of accurately representing the skin greyness factor as a function of frequency and this is confirmed by radiometry of living human skin.


Author(s):  
Yahui Wang ◽  
Ziqian Wei ◽  
Yujie Chen ◽  
Quanxin Zhou ◽  
Yubin Gong ◽  
...  

Abstract In this article, we propose a quantitative, non-destructive and noninvasive approach to obtain electromagnetic properties of liquid specimens utilizing a home-designed near-field microwave microscopy. The responses of aqueous solutions can be acquired with varying concentrations, types (CaCl2, MgCl2, KCl and NaCl) and tip-sample distances. An electromagnetic simulation model also successfully predicts the behaviors of saline samples. For a certain type of solutions with varying concentrations, the results are concaves with different bottoms, and the symmetric graphs of concave extractions can clearly identify different specimens. Moreover, we obtain electromagnetic images of capillaries with various saline solutions, as well as a photinia x fraseri Dress leaf.


2021 ◽  
Author(s):  
Zhi-Yu Feng ◽  
Yong-Bo Su ◽  
Peng Ding ◽  
Jing-Tao Zhou ◽  
Song-Ang Peng ◽  
...  

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Jorge Simon ◽  
Hugo Perez-Guerrero ◽  
Jorge Sosa-Pedroza ◽  
Fabiola Martínez-Zúñiga ◽  
Juvenal Villanueva-Maldonado ◽  
...  

As in any satellite, onboard antennas for CubeSats are crucial to establish communication with ground stations or other satellites. According to its application, antennas must comply with standardized requirements related to size, bandwidth, operating frequency, polarization, and gain. This paper presents an ultrawideband circularly polarized two-layer crossed-dipole microstrip antenna for S-band CubeSat applications using genetic algorithms optimization tools included in the 3D electromagnetic simulation software Ansys HFSS. The antenna is constructed on a 10 × 10 cm Cuclad-250 substrate with a back copper flat plane, located at λ/4 at 2.25 GHz operating frequency. The backplane with the exact substrate dimensions improves gain and reduces inside satellite radiation. Measured bandwidth defined by S11 at a −10 dB was higher than 1835 MHz with S11 = −24.68 dB at the central frequency of 2.25 GHz, while measured VSWR at the same frequency was 1.124. At 2.25 GHz, the maximum measured gain and the minimum measured axial ratio in the broadside direction were found to be 6 dBi and 0.22 dB, respectively. There are antenna simulations and measurements, as long as its fabrication guarantees application requirements that make it ready for prespace testing.


Author(s):  
Jaime Calvo-Gallego ◽  
Juan A. Delgado-Notario ◽  
Miguel Ferrando-Bataller ◽  
Kristel Fobelets ◽  
Yahya M. Meziani ◽  
...  

2021 ◽  
Vol 36 (7) ◽  
pp. 830-837
Author(s):  
Qiang Feng ◽  
Yifeng Lin ◽  
Yushan Zheng ◽  
Long Li

In this paper, an improved array factor of the concentric uniform circular array (CUCA) antenna is proposed for the orbital angular momentum (OAM) vortex beam optimization design. From the perspective of the radiation pattern’s power conservation principle, a correction factor is introduced to the conventional array factor of CUCA. Then, based on the improved array factor, by adjusting the rings’ radii parameters of the CUCA, we optimize the vortex beam’s sidelobe level through the generic algorithm (GA). Two different CUCA antenna model are calculated as examples to further illustrate the effectiveness of the improved array factor. Subsequently, an electromagnetic simulation model of two rings CUCA antenna is built at C band for generating low sidelobe vortex beam carrying OAM mode. The electromagnetic simulation model of the designed CUCA antenna is also fabricated and measured. The corresponding antenna far-field vortex beam radiation pattern and near-field vortex wave electric field distributions are measured. The simulation results and the measurement results are in good agreement. The proposed designs of antenna and OAM vortex beam regulation are expected to be used for 5G and 6G communications applications


Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 931
Author(s):  
Yue Zhao ◽  
Kaiping Zhang ◽  
Hailiang Li ◽  
Changqing Xie

We report the fabrication, electromagnetic simulation and measurement of inverted silicon pyramidal arrays with randomly distributed nanoholes that act as an anti-reflectivity coating. The fabrication route combines the advantages of anisotropic wet etching and metal-assisted chemical etching. The former is employed to form inverted silicon pyramid arrays, while the latter is used to generate randomly distributed nanoholes on the surface and sidewalls of the generated inverted silicon pyramidal arrays. We demonstrate, numerically and experimentally, that such a structure facilitates the multiple reflection and absorption of photons. The resulting nanostructure can achieve the lowest reflectance of 0.45% at 700 nm and the highest reflectance of 5.86% at 2402 nm. The average reflectance in the UV region (250–400 nm), visible region (400–760 nm) and NIR region (760–2600 nm) are 1.11, 0.63 and 3.76%, respectively. The reflectance at broadband wavelength (250–2600 nm) is 14.4 and 3.4 times lower than silicon wafer and silicon pyramids. In particular, such a structure exhibits high hydrophobicity with a contact angle up to 132.4°. Our method is compatible with well-established silicon planar processes and is promising for practical applications of anti-reflectivity coating.


Sign in / Sign up

Export Citation Format

Share Document