carbonized wood
Recently Published Documents


TOTAL DOCUMENTS

93
(FIVE YEARS 46)

H-INDEX

14
(FIVE YEARS 4)

2022 ◽  
Vol 607 ◽  
pp. 312-322
Author(s):  
Fang Wang ◽  
Haidong Zhang ◽  
Zhengguo Zhang ◽  
Qingxiang Ma ◽  
Chao Kong ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
pp. 105-119
Author(s):  
Guangyu Qin ◽  
Xiaoxiao Huang ◽  
Xu Yan ◽  
Yunfei He ◽  
Yuhao Liu ◽  
...  

AbstractWood-derived carbon has a 3D porous framework composed of through channels along the growth direction, which is a suitable matrix for preparing electromagnetic wave (EMW) absorbing materials with low cost, light weight, and environmental friendliness. Herein, the carbonized wood decorated by short cone-like NiCo2O4 (NiCo2O4@CW) with highly ordered straight-channel architecture was successfully manufactured through a facile calcination procedure. The horizontal arrangement of the through channels of NiCo2O4@CW (H-NiCo2O4@CW) exhibits a strong reflection loss value of -64.0 dB at 10.72 GHz with a thickness of 3.62 mm and a low filling ratio of 26 wt% (with the density of 0.98 g·cm-3), and the effective absorption bandwidth (EAB) is 8.08 GHz (9.92–18.0 GHz) at the thickness of 3.2 mm. The excellent microwave absorption (MA) property was ascribed to the ordered-channel structure with abundant interfaces and defects from NiCo2O4@CW, which could promote the interfacial polarization and dipole polarization. What is more, this advantageous structure increased the multiple reflections and scattering. Finite element analysis (FEA) simulation is carried out to detect the interaction between the prepared material and EMW when the ordered channels are arranged in different directions. This research provides a low-cost, sustainable, and environmentally friendly strategy for using carbonized wood to fabricate microwave absorbers with strong attenuation capabilities and light weight.


2021 ◽  
Author(s):  
Lu Ding ◽  
Mingming Yang ◽  
Dai-Viet N. Vo ◽  
Douglas Hungwe ◽  
Jiahan Ye ◽  
...  

Abstract Disaster-hit and/or un-electrified remote areas usually have electricity accessibility issues and an abundance of plant-derived debris and wood from destroyed wooden structures; this can be potentially addressed by employing a decentralized ultra-small biomass-fed gasification power generating system. This paper presents an assessment of the technical viability of an ultra-small gasification system that utilizes densified carbonized wood pellets/briquettes. The setup was run continuously for 100 hours. A variety of biomass was densified and carbonized by harnessing fugitive heat sources before charging into the reactor. Carbonized briquettes and furnished blends exhibited inferior gasification performance compared to the carbonized pellets. In the absence of tar blockage problems, steady-state conditions were achieved when pre-treated feedstock was used. Under steady-state conditions for carbonized pellets gasification operated at an equivalence ratio of 32%, cold gas efficiency, and carbon conversion of 49.2%, and 70.5% was achieved, respectively. Overall efficiency and maximum power output of 20.3% and 21 kW were realised, respectively. The results indicate that the proposed compact ultra-small power generation system is a technically feasible approach to remedy power shortage challenge.


2021 ◽  
Vol 67 (4) ◽  
pp. 167-177
Author(s):  
Noboru Sekino ◽  
Katsumi Tanabe ◽  
Zhuoqiu Jiang

2021 ◽  
Vol 414 ◽  
pp. 128925
Author(s):  
Yongchuang Wang ◽  
Wenyi Li ◽  
Huaimeng Li ◽  
Mengxiang Ye ◽  
Xian Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document