blind source separation
Recently Published Documents


TOTAL DOCUMENTS

2858
(FIVE YEARS 387)

H-INDEX

68
(FIVE YEARS 8)

2021 ◽  
Vol 2021 ◽  
pp. 1-7
Author(s):  
Jiong Li ◽  
Lu Feng

Blind source separation is a widely used technique to analyze multichannel data. In most real-world applications, noise is inevitable and will affect the quality of signal separation and even make signal separation failure. In this paper, a new signal processing framework is proposed to separate noisy mixing sources. It is composed of two different stages. The first step is to process the mixing signal by a certain signal transform method to make the expected signals have energy concentration characteristics in the transform domain. The second stage is formed by a certain BSS algorithm estimating the demixing matrix in the transform domain. In the energy concentration segment, the SNR can reach a high level so that the demixing matrix can be estimated accurately. The analysis process of the proposed algorithm framework is analyzed by taking the wavelet transform as an example. Numerical experiments demonstrate the efficiency of the proposed algorithm to estimate the mixing matrix in comparison with well-known algorithms.


Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 118
Author(s):  
Jiali Zi ◽  
Danju Lv ◽  
Jiang Liu ◽  
Xin Huang ◽  
Wang Yao ◽  
...  

In recent years, separating effective target signals from mixed signals has become a hot and challenging topic in signal research. The SI-BSS (Blind source separation (BSS) based on swarm intelligence (SI) algorithm) has become an effective method for the linear mixture BSS. However, the SI-BSS has the problem of incomplete separation, as not all the signal sources can be separated. An improved algorithm for BSS with SI based on signal cross-correlation (SI-XBSS) is proposed in this paper. Our method created a candidate separation pool that contains more separated signals than the traditional SI-BSS does; it identified the final separated signals by the value of the minimum cross-correlation in the pool. Compared with the traditional SI-BSS, the SI-XBSS was applied in six SI algorithms (Particle Swarm Optimization (PSO), Genetic Algorithm (GA), Differential Evolution (DE), Sine Cosine Algorithm (SCA), Butterfly Optimization Algorithm (BOA), and Crow Search Algorithm (CSA)). The results showed that the SI-XBSS could effectively achieve a higher separation success rate, which was over 35% higher than traditional SI-BSS on average. Moreover, SI-SDR increased by 14.72 on average.


Author(s):  
Mingqi Zhao ◽  
Gaia Bonassi ◽  
Roberto Guarnieri ◽  
Elisa Pelosin ◽  
Alice Nieuwboer ◽  
...  

Abstract Objective. Electroencephalography (EEG) is a widely used technique to address research questions about brain functioning, from controlled laboratorial conditions to naturalistic environments. However, EEG data are affected by biological (e.g., ocular, myogenic) and non-biological (e.g., movement-related) artifacts, which -depending on their extent- may limit the interpretability of the study results. Blind source separation (BSS) approaches have demonstrated to be particularly promising for attenuation of artifacts in high-density EEG (hdEEG) data. Previous EEG artifact removal studies suggested that it may not be optimal to use the same BSS method for different kinds of artifacts. Approach. In this study, we developed a novel multi-step BSS approach to optimize the attenuation of ocular, movement-related and myogenic artifacts from hdEEG data. For validation purposes, we used hdEEG data collected in a group of healthy participants in standing, slow-walking and fast-walking conditions. During part of the experiment, a series of tone bursts were used to evoke auditory responses. We quantified event-related potentials (ERPs) using hdEEG signals collected during auditory stimulation, as well as event-related desynchronization (ERD) by contrasting hdEEG signals collected in walking and standing conditions, without auditory stimulation. We compared the results obtained in terms of auditory ERP and motor-related ERD using the proposed multi-step BSS approach, with respect to two classically used single-step BSS approaches. Main results. The use of our approach yielded the lowest residual noise in the hdEEG data, and permitted to retrieve stronger and more reliable modulations of neural activity than alternative solutions. Overall, our study confirmed that the performance of BSS-based artifact removal can be improved by using specific BSS methods and parameters for different kinds of artifacts. Significance. Our technological solution supports a wider use of hdEEG-based source imaging in movement and rehabilitation studies, and contribute to further development of mobile brain/body imaging applications.


2021 ◽  
pp. 108448
Author(s):  
Gaël Mahé ◽  
Giulio G.R. Suzumura ◽  
Lionel Moisan ◽  
Ricardo Suyama

2021 ◽  
pp. 100574
Author(s):  
Christoph Muehlmann ◽  
François Bachoc ◽  
Klaus Nordhausen

2021 ◽  
Author(s):  
◽  
Seyed Reza Mir Alavi

<p>Communication is performed by transmitting signals through a medium. It is common that signals originating from different sources are mixed in the transport medium. The operation of separating source signals without prior information about the sources is referred to as blind source separation (BSS). Blind source separation for wireless sensor networks has recently received attention because of low cost and the easy coverage of large areas. Distributed processing is attractive as it is scalable and consumes low power. Existing distributed BSS algorithms either require a fully connected pattern of connectivity, to ensure the good performance, or require a high computational load at each sensor node, to enhance the scalability. This motivates us to develop distributed BSS algorithms that can be implemented over any arbitrary graph with fully shared computations and with good performance.  This thesis presents three studies on distributed algorithms. The first two studies are on existing distributed algorithms that are used in linearly constrained convex optimization problems, which are common in signal processing and machine learning. The studies are aimed at improving the algorithms in terms of computational complexity, communication cost, processors coordination and scalability. This makes them more suitable for implementation on sensor networks, thus forming a basis for the development of distributed BSS algorithms on sensor networks in our third study.  In the first study, we consider constrained problems in which the constraint includes a weighted sum of all the decision variables. By formulating a constrained dual problem associated to the original constrained problem, we were able to develop a distributed algorithm that can be run both synchronously and asynchronously on any arbitrary graph with lower communication cost than traditional distributed algorithms.  In the second study, we consider constrained problems in which the constraint is separable. By making use of the augmented Lagrangian function and splitting the dual variable (Lagrange multiplier) associated to each partial constraint, we were able to develop a distributed fully asynchronous algorithm with lower computational complexity than traditional distributed algorithms. The simplicity of the algorithm is the consequence of approximating the constraint on the equality of the decoupled dual variables. We also provide a measure of the inaccuracy in such an approximation on the optimal value of the primal objective function. Finally, in the third study, we investigate distributed processing solutions for BSS on sensor networks. We propose two distributed processing schemes for BSS that we refer to as scheme 1 and scheme 2. In scheme 1, each sensor node estimates one specific source signal while in scheme 2, by formulating a consensus optimization problem, each sensor node estimates all source signals in a fully shared computation manner. Our proposed algorithms carry the following features: low computational complexity, low power consumption, low data transmission rate, scalability and excellent performance over arbitrary graphs. Although all of our proposed algorithms share the aforementioned properties, each of them is superior in one or some of the features compared to the others. Comparative experimental results show that among all our proposed distributed BSS algorithms, a variant of scheme 1 performs best when all features are considered. This is achieved by making use of the concept of pairwise mutual information along with adding a sparsity assumption on the parameters of the model that is used in BSS.</p>


2021 ◽  
Author(s):  
◽  
Seyed Reza Mir Alavi

<p>Communication is performed by transmitting signals through a medium. It is common that signals originating from different sources are mixed in the transport medium. The operation of separating source signals without prior information about the sources is referred to as blind source separation (BSS). Blind source separation for wireless sensor networks has recently received attention because of low cost and the easy coverage of large areas. Distributed processing is attractive as it is scalable and consumes low power. Existing distributed BSS algorithms either require a fully connected pattern of connectivity, to ensure the good performance, or require a high computational load at each sensor node, to enhance the scalability. This motivates us to develop distributed BSS algorithms that can be implemented over any arbitrary graph with fully shared computations and with good performance.  This thesis presents three studies on distributed algorithms. The first two studies are on existing distributed algorithms that are used in linearly constrained convex optimization problems, which are common in signal processing and machine learning. The studies are aimed at improving the algorithms in terms of computational complexity, communication cost, processors coordination and scalability. This makes them more suitable for implementation on sensor networks, thus forming a basis for the development of distributed BSS algorithms on sensor networks in our third study.  In the first study, we consider constrained problems in which the constraint includes a weighted sum of all the decision variables. By formulating a constrained dual problem associated to the original constrained problem, we were able to develop a distributed algorithm that can be run both synchronously and asynchronously on any arbitrary graph with lower communication cost than traditional distributed algorithms.  In the second study, we consider constrained problems in which the constraint is separable. By making use of the augmented Lagrangian function and splitting the dual variable (Lagrange multiplier) associated to each partial constraint, we were able to develop a distributed fully asynchronous algorithm with lower computational complexity than traditional distributed algorithms. The simplicity of the algorithm is the consequence of approximating the constraint on the equality of the decoupled dual variables. We also provide a measure of the inaccuracy in such an approximation on the optimal value of the primal objective function. Finally, in the third study, we investigate distributed processing solutions for BSS on sensor networks. We propose two distributed processing schemes for BSS that we refer to as scheme 1 and scheme 2. In scheme 1, each sensor node estimates one specific source signal while in scheme 2, by formulating a consensus optimization problem, each sensor node estimates all source signals in a fully shared computation manner. Our proposed algorithms carry the following features: low computational complexity, low power consumption, low data transmission rate, scalability and excellent performance over arbitrary graphs. Although all of our proposed algorithms share the aforementioned properties, each of them is superior in one or some of the features compared to the others. Comparative experimental results show that among all our proposed distributed BSS algorithms, a variant of scheme 1 performs best when all features are considered. This is achieved by making use of the concept of pairwise mutual information along with adding a sparsity assumption on the parameters of the model that is used in BSS.</p>


Sign in / Sign up

Export Citation Format

Share Document