seed productivity
Recently Published Documents


TOTAL DOCUMENTS

370
(FIVE YEARS 238)

H-INDEX

9
(FIVE YEARS 2)

2022 ◽  
Vol 16 (4) ◽  
pp. 15-18
Author(s):  
Nadezhda Kasatkina ◽  
Zhanna Nelyubina

Meadow clover remains the main forage crop in the middle Urals with great potential. An urgent problem is the development and improvement of the technology of this crop cultivation, including the search for adapted varieties. The aim of the research is to estimate the fodder and seed productivity recommended by the originators of meadow clover varieties of Russian and foreign selection VIK 77, Diplo, Lestris, Ranniy 2, Kudesnik in the Middle Ural region. The studies were carried out in 2017-2019 in the forest-steppe zone of the Udmurt Republic on sod-medium-podzolic medium loamy soil. The Dymkovsky variety included in the State Register of Breeding Achievements in the Volga-Vyatka region was used as a standard. Clover varieties were sown in 2017, comprehensive study in 2018-2019. The meteorological conditions of the growing seasons during the study years were different: 2017 and 2019 - over moistened (hydrothermal coefficient – 1.97 and 1.73), 2018 - dry (hydrothermal coefficient – 0.89). Winter hardiness of meadow clover varieties was estimated at 4.5 points. Varieties Diplo, Lestris and Ranniy 2 reached mowing ripeness in 58-63 days, varieties Dymkovsky, VIK 77 and Kudesnik – in 66-70 days. The varieties Diplo, Ranniy 2 and Kudesnik provided a dry matter yield of 6.2-6.8 t/ha, on average for two years of using meadow clover grass-stand. The highest yield of metabolizable energy (51.2 and 55.0 GJ/ha), digestible protein (0.44 and 0.46 t/ha) and feed units (3.79 and 4.09 thousand feed units/ha) was found in the standard variety Dymkovskiy and the tetraploid variety Kudesnik. Seed productivity of cultivars of meadow clover of the 1st year of use was at the level of 137-314 kg/ha, the highest - 314 kg/ha in the standard variety Dymkovsky


Author(s):  
I. V. Cikov

As a result of the study it was determined that Orontium aquaticum L. under the conditions of the Right- Bank Forest-Steppe of Ukraine undergoes a full cycle of seasonal growth and development. The morphometric parameters of plants growing in well-lit areas practically do not differ from a natural ones. O. aquaticum reproduces both by seeds and vegetatively. Ten-year-old plants, up to 45 cm high, form about 85 green fruits from the pericarp with a diameter of 0.6 to 1.8 cm and a weight of 0.4 to 2.8 g. The seed productivity is 39.7%. According to the assessment, O. aquaticum belongs to promising and highly decorative species.


2021 ◽  
Author(s):  
Mikhail Lomov ◽  
Yuri Piskovatsky ◽  
Lyudmila Solozhentseva

The results of selection studies conducted at the Central Experimental Base of the Federal State Budgetary Scientific Institution Federal Williams Research Center of Forage Production and Agroecology in the Non-Chernozem Zone of the Russian Federation are presented. Brief data on promising samples and hybrids of alfalfa created in the department of alfalfa breeding for seed productivity are presented. For a long time, alfalfa breeding was mainly in the direction of obtaining new varieties with high yields of fodder mass and little attention was paid to seed yields, which led to the creation of good varieties for collecting green mass and medium or even poor seed productivity. Therefore, the creation of varieties with high feed and seed productivity is the primary task of alfalfa breeding. For this purpose, the main methods of selection are used — polycross, interspecific and intervariety hybridization and selection. In the obtained populations, a careful selection for early ripeness, pollen fertility, plant flowering friendliness is carried out, the power of hybrids, their foliage and other useful indicators are taken into account. By the nature of flowering and pollination, alfalfa refers to cross-pollinating plants. For agricultural production, it is necessary to have alfalfa varieties not only with high, but also stable seed productivity, which does not depend on the conditions of the growing environment and the presence of pollinators.


2021 ◽  
Author(s):  
Mihail Marinich

The aim of the research was to assess the breeding value of the source material of F. rubra of the lawn direction obtained under conditions of various ecotopes of the south of the Central Russian Upland with a predominance of carbonate substrate. In total, 106 numbers of red fescue of various genetic and geological-geographical origin were evaluated in the experiment: 4 varieties and 102 breeding samples. Tests of the breeding value of the collection numbers were carried out in comparison with the zoned varieties of domestic selection (‘Veselka’, ‘Gostenka’, ‘Iskrinka’) and foreign selection (‘Gondolin’). The forms of F. rubra have been identified, approaching erect in shape, having a high shoot-forming ability, pronounced antocian color of inflorescences, whitish bloom on the leaves, which increases the overall decorative effect of lawn herbage. According to a number of important traits for breeding for seed productivity, the forms selected in natural habitats with a predominance of carbonate substrate have wide limits of variation and can serve as genetic sources of individual breeding traits for obtaining new varieties of lawn management with high seed productivity and decorativeness.


2021 ◽  
Vol 22 (6) ◽  
pp. 844-856
Author(s):  
T. A. Rozhmina ◽  
A. A. Zhuchenko ◽  
E. G. Gerasimova ◽  
I. A. Andreeva ◽  
A. D. Smirnova

The aim of the research was to study the response of various flax genotypes to the treatment of plants with a sulfonylurea herbicide – Magnum (active ingredient is metsulfuron-methyl) and to identify resistant forms for use in breeding programs for herbicide resistance. In 2018-2020 an assessment of 24 varieties and promising lines of fiber flax of domestic and foreign selection for resistance to this herbicide was carried out, the treatment of crops with the preparation was carried out at the recommended consumption rate of 0.01 kg/ha in the “herringbone” phase. It has been proved that the use of this herbicide leads to uneven plant growth during the “herringbone – flowering” period, which negatively affects the yield and quality of flax fiber. The decrease in the main indicators of the productivity and quality of the fiber in the variant with the use of the herbicide in comparison with the control, depending on the genotype was: in plant height – up to 44.4 %, in the weight of the technical part – 71.1 %, in the fiber mass – 74.8 %, in «myklost» (the ratio of the technical length of stem to its diameter)– 46.3 %, in the length of the elementary fiber – 27.7 %. A high level of resistance (over 80 %) to the herbicide Magnum for all analyzed traits was shown by the varieties Atlant (Russia) and Mogilevsky (Belarus). It was shown that when treating fiber flax plants with the herbicide, as a rule, an increase in inflorescence occurs due to a decrease in the technical length of the stem. It results in rise of the main indicators of seed productivity in most of genotypes under the influence of the Magnum preparation – the number of bolls and seeds per plant (up to 3.2 times). The exception was the variety Vega 2 (Lithuania), which had a decrease in the number of bolls per plant in the variant with herbicide treatment compared with the control by 1.8 times, and in the number of seeds by 5.3 times. This varietywasalso the most sensitive to the effect of Magnum in all parameters of productivity and fiber quality. The results are consistent with the data obtained whentreating various collection samples of fiber flax with a tank mixture Magnum + Herbitox L + Miura at the recommended consumption rates (0.007 + 0.6 + 1.0 kg(l)/ha).


2021 ◽  
pp. 3-7
Author(s):  
Luba Pylypenko ◽  
Roman Krutko ◽  
Oksana Shabetya

The use of intra-varietal crossing is an important element to increase seed yield and improve a variety. The aim of the research was to identify the influence of different options of intra-varietal pollination of sweet pepper on seed productivity and other quantitative traits. It has been established, that re-pollination of sweet pepper within the variety in relation to self-pollination causes a reduction in the offspring of the period before fruit ripening by 3–7 days. For all options of pollination, there was also a significant increase in plant height by 7–8 cm, fruit weight by 7–16 g, the number of fruits on a plant by 2–6 units. Different methods of re-pollination of plants significantly affected fruit productivity, increasing it by 62–106 %, increased seed yield from one fruit by 28 %. Seed productivity of sweet pepper plants increased by 78–163 % when re-pollination was used. Options of using the pollen of different flowers (from 2–5 other plants) showed the greatest effect. This technique is one way to increase the yield of sweet pepper seeds


2021 ◽  
Vol 2021 (3) ◽  
pp. 16-28
Author(s):  
Galina Stepanova

The first Russian variety of black medic of the Mira was created and included in the State Register of Breeding Achievements. The study of the symbiotic properties of this variety showed that the most promising strains for pre-sowing inoculation were LX1 and 412b, the first increased the collection of dry matter and seeds by 96 and 115%, and the second – by 81 and 73%, respectively. Both strains can be used when cultivating this variety for feed and seeds. Inoculation with the LX6 strain increased seed productivity by 84%. Strains LX2, LX5 and LX6 increase the adaptive ability of varieties of the Mira, shifting the metabolism of the alfalfa-rhizobial system towards increasing seed productivity. The proportion of seeds in plants inoculated with the above-mentioned strains increases to 24–31% of the total plant weight, and in other symbiotic systems this indicator was 19–22%. Strain LX1 was isolated from nodules of plants belonging to the same population on the basis of which the Mira variety was created and it is the most genetically complementary to this variety. The yield of black medic of the Mira variety without inoculation for two years of use was 3.3 t/ha of dry matter, 0.67 t/ha of seeds. Pre-sowing inoculation of seeds with the LX1 strain increased the yield of this variety to 6.48 t/ha (+96%) of dry matter and seeds – to 1.44 t/ha (+115%). In the vegetation experiment, inoculation with the rhizobium strain LX1 significantly increased the height of plants by 4.2 cm, the leaf area by 0.69 cm2 (+49%), productivity by 176%. The total nitrogen content in the aboveground part of the plants reached 3.63%, the roots 3.31%, the control indicators were 3.02 and 2.77%, respectively.


2021 ◽  
pp. 68-70
Author(s):  
O. P. Kigashpaeva ◽  
A. V. Gulin ◽  
V. Y. Dzhabrailova

The tomato culture is the leader in terms of cultivation area and production volume among food products of plant origin. Fruits contain a variety of minerals, sugars, fats, vitamins.The goal of the study and study of economic characteristics: yield, marketability, average weight of fruits, weight of 1000 pieces. seeds and seed productivity of tomato varieties of two varieties, created by Astrakhan breeders and the use of the results obtained in planning seed production and the development of sale and purchase prices for varietal seeds to provide large farms, summer residents and owners of private farms with domestic seeds for the purpose of import substitution and suitable for various uses.Methods. The experiments were carried out in the fields of Precaspian agrarian federal scientific center of the Russian academy of sciences according to well-known methods. Studied 9 salad and 7 for mechanized harvesting varieties of tomato.Results. The article presents the results of studying the economic qualities and seed productivity of tomato varieties of two types, differing in shape, size, weight, fruit color and directions of use. The first group includes large-fruited salad varieties with non-cracking fruits, which are well stored and transported in brown maturity with an average fruit weight of 100-200 g or more. The second group – with plumshaped and elongated fruits, the average weight of which is 75-100 g, very dense, characterized by suitability for long-term transportation, and in terms of strength they are not inferior to foreign varieties and hybrids. The shape and weight of fruits of varieties of both groups are different, the yield and marketability of varieties is quite high, but the weight of 1000 seeds and seed productivity does not depend on these indicators, but is individual for each variety.


2021 ◽  
pp. 52-57
Author(s):  
L. M. Shilo ◽  
I. T. Ushakova ◽  
G. D. Levko

Relevance and methodology. Lychnis coronaria is a perennial herbaceous plant with high decorative properties, with prolonged flowering in the second or third year of vegetation. The pubescent leaves form beautiful rosettes. The plant is undemanding to the growing conditions. The research material was the varietal population of Lychnis coronaria. The study was carried out in the open ground of the Moscow region (2014- 2021) on experimental plots of the flower crops sector of the FSBSI FSVC.Results. The most aligned form according to decorative features was identified – LC 1-21 with high seed productivity of inflorescences, decorative and winter hardiness. A variety testing and preliminary reproduction of a promising cultivar of Lychnis coronaria was carried out. This variety was transferred to the FSBI "State Export Commission" in 2021 under the name “Malinovy Rassvet”. Such signs as "plant height", "bush diameter", "number of ornamental shoots", "flower diameter" had a low or average variation value, which characterizes this sample as the most aligned. Thus, the cv. “Malinovy Rassvet” of Lychnis coronaria is recommended for cultivation and use for decorative purposes. The leaves and the bright color of the flowers provide a contrast to the perennial borders and flower beds. It looks good both in single and group plantings, as well as in cutting. It is grown as a short-lived perennial. The main advantages of the variety are the color fastness of flowers when burned out in the sun, resistance to diseases and pests, high seed productivity.


Sign in / Sign up

Export Citation Format

Share Document