WORKSPACE ANALYSIS OF A FLAME INTRA-ROW WEEDING ROBOT IN VEGETABLE FIELD AND NUMERICAL SIMULATION OF PROPANE COMBUSTION

In order to improve the seed filling performance of mechanical hole type seed metering device with high speed, a vertical disc metering device was designed with seed agitator to improve the seed filling probability. Discrete element simulation method and physical prototype bench tests were used to simulate and analyse the seed metering process. The structure parameters of the seed agitators were optimized by the quadratic orthogonal rotation central composite design test. The results showed that: 1) the addition of seed agitator had a significant influence on the MIS (miss index), among which the concave type had the lowest MIS, and it was the highest without agitator; 2) for concave type agitator, the optimal value of depth and angle were 3.1 mm and 60.5°, respectively; 3) the physical prototype tests showed that the QFI (quality of feed index) was more than 95% under the speed of 2-10 km/h, and the MIS was less than 1%, which meets the requirements of precision sowing.

Characterization of the MISG soot generator with an atmospheric simulation chamber

The performance of a Mini-Inverted Soot Generator (MISG) has been investigated at ChAMBRe (Chamber for Aerosol Modelling and Bio-aerosol Research) by studying the properties of soot particles generated by ethylene and propane combustion. Starting from an extensive classification of combustion conditions and resulting flame shapes, the MISG exhaust was characterized in terms of concentration of emitted particles and gases, particle size distribution and optical properties. Soot particles were also collected on quartz fibre filters and then analysed by optical and thermal-optical techniques, to measure the spectral dependence of the absorption coefficient b_abs, and their composition in terms of Elemental and Organic Carbon (EC and OC). Significant differences could be observed when the MISG is fuelled with ethylene and propane both in terms of particle size and optical behaviour (i.e., absorption coefficient). Values of the Mass Absorption Coefficient (MAC) and of the Angstrom Absorption Exponent (AAE) turned out to be compatible with the literature, even if with some specific difference. The comprehensive characterization of the MISG soot particles is an important piece of information to design and perform experiments in atmospheric simulation chambers.

SPECTRAL DIAGNOSTICS OF THE HYDROCARBON FUEL COMBUSTION PROCESS

It is proposed to use the methods of applied optical spectroscopy to solve the problem of control and diagnostics of gaseous hydrocarbon fuel combustion in this work. The results of an experimental study of spectroscopic informative parameters characterizing the propane combustion process are presented for three modes: combustion of pure propane without air supply, stoichiometric combustion and combustion with a change in the amount of supplied air relative to stoichiometric combustion. As a result of the experiment, it was found that the most intense bands in the emission spectrum of the flame arising from the combustion of propane correspond to the spectral bands of radicals of combustion products: OH, CH, and C2. While the intensities of various systems of bands in the flame spectrum depend significantly on the composition of the combustible mixture.

Activity of Ag/CeZrO2, Ag+K/CeZrO2, and Ag-Au+K/CeZrO2 Systems for Lean Burn Exhaust Clean-Up

Herein, the activity of Ag and bimetallic Au-Ag catalysts, supported over Ce0.85Zr0.15O2 (CZ), was investigated in a complex stream, whose components included CO, C3H8, NO, O2, and, optionally, an injection of water vapor. In such a stream, three of the possible reactions that can occur are CO oxidation, propane combustion, and NO oxidation. The aim of these studies was to explore whether silver, due to its strong affinity to oxygen, will counteract the stabilization of oxygen by potassium. The effect of the presence of potassium ions on the activity of the monometallic silver catalysts is beneficial in the complex stream without water vapor in all three studied reactions, although it is negligible in the model CO stream. It has been shown that water vapor strongly suppresses the activity of the Ag+K/CZ catalyst, much more so than that of the Ag/CZ catalyst. The second purpose of the work was to determine whether the negative effect of potassium ions on the activity of nanogold catalyst can be countered by the addition of silver. Studies in a model stream for CO oxidation have shown that, for a catalyst preloaded with gold, the effect of potassium is nulled by silver, and the activity of AuAg + 0.15 at%K/CZ and AuAg + 0.30 at%K/CZ is the same as that of the monometallic Au catalyst. Conversely, when the reaction is carried out in a complex stream, containing CO, C3H8, NO, O2, and water vapor, the presence of water vapor leads to higher CO conversion as well as increased NO2 formation and slightly suppresses the C3H8 combustion.

Tandem In2O3-Pt/Al2O3 catalyst for coupling of propane dehydrogenation to selective H2 combustion

Tandem catalysis couples multiple reactions and promises to improve chemical processing, but precise spatiotemporal control over reactive intermediates remains elusive. We used atomic layer deposition to grow In2O3 over Pt/Al2O3, and this nanostructure kinetically couples the domains through surface hydrogen atom transfer, resulting in propane dehydrogenation (PDH) to propylene by platinum, then selective hydrogen combustion by In2O3, without excessive hydrocarbon combustion. Other nanostructures, including platinum on In2O3 or platinum mixed with In2O3, favor propane combustion because they cannot organize the reactions sequentially. The net effect is rapid and stable oxidative dehydrogenation of propane at high per-pass yields exceeding the PDH equilibrium. Tandem catalysis using this nanoscale overcoating geometry is validated as an opportunity for highly selective catalytic performance in a grand challenge reaction.