food contact surfaces
Recently Published Documents


TOTAL DOCUMENTS

329
(FIVE YEARS 104)

H-INDEX

37
(FIVE YEARS 6)

Author(s):  
Jianxiong Hao ◽  
Junyi Zhang ◽  
Xueqi Zheng ◽  
Dandan Zhao

Abstract In the present study, the bactericidal efficacy of slightly acidic electrolyzed water (SAEW) against L. monocytogenes planktonic cells and biofilm on food-contact surfaces including stainless steel and glass was systematically evaluated. The results showed that SAEW (pH of 5.09 and available chlorine concentration (ACC) of 60.33 mg/L) could kill L. monocytogenes on food-contact surfaces completely in 30 s, whose disinfection efficacy is equal to that of NaClO solutions (pH of 9.23 and ACC of 253.53 mg/L). The results showed that long exposure time and high ACC contributed to the enhancement of the disinfection efficacy of SAEW on L. monocytogenes on food-contact surfaces. Moreover, the log reduction of SAEW treatment presented an increasing tendency within the prolonging of treatment time when SAEW was used to remove the L. monocytogenes biofilm formed on stainless steel and glass surfaces, which suggested that SAEW could remove L. monocytogenes biofilm effectively and its disinfection efficacy is equal to (in case of stainless steel) or higher than (in case of glass) that of high ACC of NaClO solutions. In addition, the results of the crystal violet staining and scanning electron microscopy (SEM) also demonstrated that SAEW treatment could remove the L. monocytogenes biofilm on food-contact surfaces.


Horticulturae ◽  
2021 ◽  
Vol 8 (1) ◽  
pp. 20
Author(s):  
Renee M. Holland ◽  
Jinru Chen ◽  
Himabindu Gazula ◽  
Harald Scherm

Although previous studies have examined microbial loads on food contact surfaces in blueberry packing plants, there is currently no information regarding microbial risks associated with mechanical berry harvesters used in commercial blueberry production. In this study, we surveyed up to nine fruit contact surfaces on seven mechanical harvesters in each of 2015 and 2016 in the field. These surfaces included the shaking rods at the front of the harvester, the sidewalls of the harvesting tunnel behind the shaking mechanism, the catcher plates collecting the detached berries, horizontal and vertical fruit conveyor belts, and berry lugs collecting the fruit at the back of the harvester. Swab samples were collected from each surface three times a day (morning, noon, and evening) and assessed for environmental and fecal indicator organisms including total aerobes, total yeasts and molds, coliforms and fecal coliforms, and enterococci. At the same time points, fruit samples were assessed for microbial loads before the fruit entered each harvester and after they exited the harvester. Results showed statistically significant differences in microbial loads among harvester surfaces, whereas the effect of sampling time was generally not significant. High levels of total aerobes and total yeasts and molds were recorded, especially on horizontal surfaces and/or those located at the bottom of the harvester such as the lower sidewall, the catcher plates, and the horizontal conveyor belt. These surfaces therefore should be targeted by cleaning and sanitization practices. There was also statistical evidence that passage through the harvester may increase the levels of the environmental microorganisms on fruit in the field. In contrast, fecal indicator organisms such as fecal coliforms and enterococci were detected only sporadically and at very low densities on harvester surfaces and blueberry fruit, and there was no evidence that passage through the harvester increased their levels on the fruit. Berry lugs consistently harbored microbial loads, and given their movement back and forth between the field and the packing plant, deserve particular attention with regard to cleaning, sanitization, and storage protocols.


2021 ◽  
pp. 110865
Author(s):  
Shubham Sharma ◽  
Swarna Jaiswal ◽  
Brendan Duffy ◽  
Amit K. Jaiswal

Foods ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2849
Author(s):  
Ignacio Muro-Fraguas ◽  
Paula Fernández-Gómez ◽  
Rodolfo Múgica-Vidal ◽  
Ana Sainz-García ◽  
Elisa Sainz-García ◽  
...  

Biofilm formation on food-contact surfaces is a matter of major concern causing food safety and spoilage issues to this sector. The aim of this study was to assess the durability of the anti-biofilm capacity of a plasma-polymerized coating composed of a base coating of (3-aminopropyl)triethoxysilane (APTES) and a functional coating of acrylic acid (AcAc). Coated and uncoated AISI 316 stainless steel (SS) plates were subjected to five sanitization cycles with sodium hypochlorite (0.05%) and peracetic acid (0.5%). The effectiveness of the coating for the inhibition of multi-strain Listeria monocytogenes biofilm formation was confirmed using a three-strain cocktail, which was grown on the SS plates at 12 °C for 6 days. Compared to the uncoated SS, relative biofilm productions of 14.6% on the non-sanitized coating, 27.9% on the coating after sanitization with sodium hypochlorite, and 82.3% on the coating after sanitization with peracetic acid were obtained. Morphological and physicochemical characterization of the coatings suggested that the greater anti-biofilm effectiveness after sanitization with sodium hypochlorite was due to the high pH of this solution, which caused a deprotonation of the carboxylic acid groups of the functional coating. This fact conferred it a strong hydrophilicity and negatively charged its surface, which was favorable for preventing bacterial attachment and biofilm formation.


Author(s):  
Jared Johnson ◽  
Brandon Selover ◽  
Chris Curtin ◽  
Joy Waite-Cusic

The aim of this study was to investigate the temporal stability of microbial contamination during Cheddar cheese production by examining patterns of non-starter bacteria in 60-day aged Cheddar collected from the start and end of 30 consecutive production days. Further, we explored the source of these temporal microbial variations by comparing microbial communities in the aged cheese to those on food contact surfaces from a piece of cheesemaking equipment previously identified as a major source of non-starter bacteria in the same processing environment. 16S rRNA metabarcoding and culture-based sequencing methods identified two Streptococcus sequence variants significantly associated with the end of the production day in both the aged cheese and the cheese processing environment. Closer inspection of these sequence variants in the aged cheese over the 40-day sampling period revealed sinusoidal-like fluctuations in their relative ratios, which appeared to coincide with the Lactococcus starter rotation schedule. These results demonstrate that the microbial composition of finished cheese can vary according to the timing of processing within a production day. Further, our results demonstrate that time-of-day microbial differences in cheese can result from bacterial growth on food contact surfaces and that the composition of these microbial differences is subject to change day-to-day and may be linked to routine changes in the Lactococcus starter culture. Importance. Long production schedules used in modern cheese manufacturing can create circumstances which support the growth of microorganisms in the cheese processing environment. This work demonstrates that this growth can lead to significant changes in the microbial quality of aged cheese produced later in the production day. Further, we demonstrate that the dominant bacteria associated with these microbial changes throughout production are subject to change between days and might be influenced by specific cheese manufacturing practices. These findings improve understanding of microbial contamination patterns in modern food manufacturing facilities, therefore improving our ability to develop strategies to minimize quality losses due to microbial spoilage.


2021 ◽  
Vol 854 (1) ◽  
pp. 012015
Author(s):  
I Cirkovic

Abstract Biofilms are complex microbial communities formed by one and more species embedded in an extracellular polymeric matrix of different compositions depending on the attached microbial species and the type of food manufacturing. Attachment of bacteria to food contact surfaces and the subsequent formation of biofilms can cause equipment damage, food spoilage and even human diseases. Foodborne diseases associated with biofilms in the food industry can be intoxications or infections and can have great impact on human health. Foodborne pathogens that express capacity for biofilm formation under different conditions in the food industry, and that are in the scope of our investigations, are Salmonella (which, on contaminating a food pipeline biofilm, could induce massive outbreaks and even death in children and elderly) and Listeria monocytogenes (a ubiquitous bacterium that can cause abortion in pregnant women and other serious complications in children and the elderly).


Sign in / Sign up

Export Citation Format

Share Document