partial factor
Recently Published Documents


TOTAL DOCUMENTS

131
(FIVE YEARS 47)

H-INDEX

12
(FIVE YEARS 2)

Author(s):  
Yao Wang ◽  
Meng Zhou ◽  
Meng Hou ◽  
Yimin Chen ◽  
Yueyu Sui ◽  
...  

Maintaining nitrogen (N) balance and inhibiting N leaching loss in the soil-crop system is crucial to maintaining yield and reducing the environmental pollution. This study investigated the effects of soil NO<sub>3</sub><sup>−</sup>-N content and accumulation, eggplant yield, N leaching and balance response to biochar addition, including regular fertilisation and irrigation (W + F), biochar addition with regular fertilisation and irrigation (W + F + B), and biochar addition with 20% fertilisation and irrigation reduction (0.8W + 0.8F + B) treatments. Compared with W + F, W + F + B and 0.8W + 0.8F + B increased soil NO<sub>3</sub><sup>−</sup>-N content in 0–40 cm and soil NO<sub>3</sub><sup>−</sup>-N accumulation in 0–20 cm, and raised harvest index, N surplus and balance. Simultaneously, 0.8W + 0.8F + B compared to W + F enhanced N use efficiency and N partial factor productivity, conversely, it decreased N dry matter production efficiency, N surplus and balance. Stepwise regression analysis demonstrated that the effect of NO<sub>3</sub><sup>−</sup>-N leaching lasted in 60 cm under biochar addition in the first year, and lasted in 20 cm without biochar application in the next year. Altogether, biochar addition with 20% fertilisation and irrigation reduction is the most suitable management strategy to decrease N surplus and leaching, and maintain eggplant N uptake in a two-year cycle system on greenhouse vegetables in Mollisols.  


2021 ◽  
Vol 13 (19) ◽  
pp. 10917
Author(s):  
Piotr Szulc ◽  
Katarzyna Ambroży-Deręgowska ◽  
Iwona Mejza ◽  
Stanisław Grześ ◽  
Waldemar Zielewicz ◽  
...  

Failure to adjust the fertilization system to quantitative needs, and especially to the dynamics of mineral demand, causes plant metabolism disorders, low mineral utilization by the plant, and an increased risk of environmental pollution. Additionally, unbalanced mineral fertilization may reduce the assimilation surface actively involved in photosynthesis, which determines the yield potential of individual varieties. The aim of the strict field experiment was to determine the responses of two types of maize varieties (Zea mays L.) to treatments with different nutrient management systems, as expressed by the growth analysis of active organs during photosynthesis, SPAD (soil and plant analysis development) leaf greenness index, green mass yield, and unit nitrogen productivity from PFPFN mineral fertilization (partial factor productivity fertilizer nitrogen). It was demonstrated that the total area of leaf blades of a single plant and the LAI (leaf area index) value were significantly higher in the “stay-green” hybrid compared to the traditional variety. The analysis of leaf morphological structure of the “stay-green” hybrid, based on SLA (specific leaf area), indicated a highly effective utilization of nitrogen, leading to faster leaf production with a larger assimilation area, which formed the basis for effective absorption of solar radiation. The selection of “stay-green” varieties for silage cultivation guarantees high green mass yields. The risk of lower maize biomass intended for ensilage can only be reduced by applying balanced mineral fertilization of all nutrients. The omission of phosphorus (P) and potassium (K) in the mineral fertilization dose, regardless of the variety tested, was a factor reducing the yield of maize biomass intended for ensilage and a lower partial factor productivity of nitrogen fertilizer compared to the treatment optimally balanced with respect to the nitrogen dose.


2021 ◽  
Vol 54 (5) ◽  
Author(s):  
Jesús Miguel Bairán ◽  
Nikola Tošić ◽  
Albert de la Fuente

AbstractFibre reinforced concrete (FRC) is increasingly used for structural purposes owing to its many benefits, especially in terms of improved overall sustainability of FRC structures relative to traditional reinforced concrete (RC). Such increased structural use of FRC requires safe and reliable models for its design in ultimate limit states (ULS). Particularly important are models for shear strength of FRC members without shear resistance due to the potential of brittle failure. The fib Model Code 2010 contains a model for the shear strength of FRC members without shear reinforcement and the same partial factor accepted for RC structures is accepted for FRC elements. This approach, however, is potentially on the unsafe side since the uncertainties of some design-determining mechanical properties of FRC (i.e., residual flexural strength) are larger than those for RC. Therefore, in this study, a comprehensive reliability-based calibration of the partial factor γc for the shear design of FRC members without shear reinforcement according to the fib Model Code 2010 model is performed. As a first step, the model error δ is assessed on 332 experimental results. Then, a parametric analysis of 700 cases is performed and a relationship between the target failure probability βR and γc is established. The results demonstrate that the current model together with the prescribed value of γc = 1.50 does not comply with the failure probabilities accepted for the different consequences of failure of FRC members over a 50-year service life. Therefore, changes to the shear resistance model are proposed in order to achieve the target failure probabilities.


Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4081
Author(s):  
João Pacheco ◽  
Jorge de Brito ◽  
Carlos Chastre ◽  
Luís Evangelista

This paper contributes to the definition of design clauses for coarse recycled aggregate concrete. One of the main reasons for scepticism towards recycled aggregate concrete is the perceived notion that the heterogeneity of recycled aggregates may increase the uncertainty of the behaviour of concrete. Therefore, the paper uses structural reliability concepts to propose partial factors for recycled aggregate concrete’s design for shear failure. The paper builds upon a previous publication by the authors, in which the model uncertainty of recycled aggregate concrete elements designed for shear, with and without shear reinforcement, was compared with that of natural aggregate concrete elements. In that paper, the statistics of the model uncertainty for recycled aggregate concrete shear design were indeed found to be less favourable than those of natural aggregate concrete. Therefore, a partial factor for recycled aggregate concrete design is needed to ensure safety. This paper presents partial factors calibrated with explicit reliability analyses for different cases of design concerning beams (in the case of shear design of elements with shear reinforcement) and slabs (for the design of elements without shear reinforcement). For full incorporation of coarse recycled concrete aggregates and the design of elements without shear reinforcement, the calibrated partial factor reduces the design value of shear resistance by 10% (design with EN1992) or 15% (design with prEN1992) in comparison to natural aggregate concrete’s design. For the shear design of elements with shear reinforcement, the partial factor decreases resistance by 5% but a sensitivity analysis showed that the reduction might be, under pessimistic expectations, of up to 20%.


Author(s):  
Iqra Ghafoor ◽  
Muhammad Habib-ur-Rahman ◽  
Muqarrab Ali ◽  
Muhammad Afzal ◽  
Wazir Ahmed ◽  
...  

AbstractHigher demands of food led to higher nitrogen application to promote cropping intensification and produce more which may have negative effects on the environment and lead to pollution. While sustainable wheat production is under threat due to low soil fertility and organic matter due to nutrient degradation at high temperatures in the region. The current research explores the effects of different types of coated urea fertilizers and their rates on wheat crop under arid climatic conditions of Pakistan. Enhancing nitrogen use efficiency by using eco-friendly coated urea products could benefit growers and reduce environmental negative effects. A trial treatment included N rates (130, 117, 104, and 94 kg ha-1) and coated urea sources (neem coated, sulfur coated, bioactive sulfur coated) applied with equal quantity following split application method at sowing, 20 and 60 days after sowing (DAS). The research was arranged in a split-plot design with randomized complete block design had three replicates. Data revealed that bioactive sulfur coated urea with the application of 130 kg N ha-1 increased chlorophyll contents 55.0 (unit value), net leaf photosynthetic rate (12.51 μmol CO2 m-2 s-1), and leaf area index (5.67) significantly. Furthermore, research elucidates that bioactive sulfur urea with the same N increased partial factor productivity (43.85 Kg grain Kg-1 N supplied), nitrogen harvest index (NHI) 64.70%, and partial nutrient balance (1.41 Kg grain N content Kg-1 N supplied). The neem-coated and sulfur-coated fertilizers also showed better results than monotypic urea. The wheat growth and phenology significantly improved by using coated fertilizers. The crop reached maturity earlier with the application of bioactive sulfur-coated urea than others. Maximum total dry matter 14402 (kg ha-1) recorded with 130 kg N ha-1application. Higher 1000-grain weight (33.66 g), more number of grains per spike (53.67), grain yield (4457 kg ha-1), and harvest index (34.29%) were obtained with optimum N application 130 kg ha-1 (recommended). There is a significant correlation observed for growth, yield, and physiological parameters with N in the soil while nitrogen-related indices are also positively correlated. The major problem of groundwater contamination with nitrate leaching is also reduced by using coated fertilizers. Minimum nitrate concentration (7.37 and 8.77 kg ha-1) was observed with the application of bioactive sulfur-coated and sulfur-coated urea with lower N (94 kg ha-1), respectively. The bioactive sulfur-coated urea with the application of 130 kg N ha-1 showed maximum phosphorus 5.45 mg kg-1 and potassium 100.67 mg kg-1 in the soil. Maximum nitrogen uptake (88.20 kg ha-1) is showed by bioactive sulfur coated urea with 130 kg N ha-1 application. The total available NPK concentrations in soil showed a significant correlation with physiological attributes; grain yield; harvest index; and nitrogen use efficiency components, i.e., partial factor productivity, partial nutrient balance, and nitrogen harvest index. This research reveals that coating urea with secondary nutrients, neem oil, and microbes are highly effective techniques for enhancing fertilizer use efficiency and wheat production in calcareous soils and reduced N losses under arid environments.


Structures ◽  
2021 ◽  
Vol 30 ◽  
pp. 440-454
Author(s):  
B. Somodi ◽  
B. Kövesdi ◽  
T. Hornyák

2021 ◽  
Vol 12 ◽  
Author(s):  
Umme Aminun Naher ◽  
Jatish Chandra Biswas ◽  
Md. Maniruzzaman ◽  
Faruk Hossain Khan ◽  
Md. Imran Ullah Sarkar ◽  
...  

Decomposed organic materials, in combination with plant growth-promoting bacteria (PGPB), are environmentally friendly and reduce synthetic fertilizer use in rice production. A bio-organic fertilizer (BoF) was prepared using kitchen waste (79%), chita-dhan (unfilled rice grain) biochar (15%), rock phosphate (5%), and a consortium of 10 PGPB (1%) to supplement 30% nitrogen and to replace triple superphosphate (TSP) fertilizer in rice production with an improvement of soil health. PGPB were local isolates and identified using 16S ribosomal RNA partial gene sequences as Bacillus mycoides, Proteus sp., Bacillus cereus, Bacillus subtilis, Bacillus pumilus, Paenibacillus polymyxa, and Paenibacillus spp. Isolates could fix N2 by 0.7–1.4 g kg–1, solubilize 0.1–1.2 g kg–1 phosphate, and produce 0.1–40 g kg–1 indoleacetic acid. The performance of BoF was evaluated by 16 field experiments and 18 farmers’ field demonstration trials during the year 2017–2020 in different parts of Bangladesh. Performances of BoF were evaluated based on control (T1), full synthetic fertilizer dose of N, P, and K (T2), BoF (2 t ha–1) + 70% N as urea + 100% K as muriate of potash (T3), 70% N as urea + 100% P as TSP + 100% K as muriate of potash (T4), and 2 t ha–1 BoF (T5) treatments. At the research station, average grain yield improved by 10–13% in T3 compared with T2 treatment. Depending on seasons, higher agronomic N use efficiency (19–30%), physiological N use efficiency (8–18%), partial factor productivity (PFP)N (114–150%), recovery efficiency (RE)N (3–31%), N harvest index (HIN) (14–24%), agronomic P use efficiency (22–25%), partial factor productivity of P (9–12%), AREP (15–23%), and HIP (3–6%) were obtained in T3 compared with T2 treatment. Research results were reflected in farmers’ field, and significant (P &lt; 0.05) higher plant height, tiller, panicle, grain yield, partial factor productivity of N and P were obtained in the same treatment. Application of BoF improved soil organic carbon by 6–13%, along with an increased number of PGPB as compared with full synthetic fertilizer dose. In conclusion, tested BoF can be considered as a green technology to reduce 30% synthetic N and 100% TSP requirements in rice production with improved soil health.


PLoS ONE ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. e0247578
Author(s):  
Qing-Jie Du ◽  
Huai-Juan Xiao ◽  
Juan-Qi Li ◽  
Jia-Xin Zhang ◽  
Lu-Yao Zhou ◽  
...  

To select the optimum fertilizer application under specific irrigation levels and to provide a reliable fertigation system for tomato plants, an experiment was conducted by using a microporous membrane for water-fertilizer integration under non-pressure gravity. A compound fertilizer (N:P2O5:K2O, 18:7:20) was adopted for topdressing at four levels, 1290 kg/ha, 1140 kg/ha, 990 kg/ha, and 840 kg/ha, and the locally recommended level of 1875 kg/ha was used as the control to explore the effects of different fertilizer application rates on growth, nutrient distribution, quality, yield, and partial factor of productivity (PFP) in tomato. The new regime of microporous membrane water-fertilizer integration under non-pressure gravity irrigation reduced the fertilizer application rate while promoting plant growth in the early and intermediate stages. Except for the 990 kg/ha fertilizer treatment, yields per plant and per plot for each fertilizer application rate were higher than or equal to those of the control. The new regime could effectively improve PFP and reduce soil nutrient enrichment. Fertilizer at 840 kg/ha showed the optimum results by increasing PFP by 75.72% as compared to control. In conclusion, the fertilizer rate at 840 kg/ha has not only maintained the productivity of soil but also tomato growth and quality of fruit which makes the non-pressure gravity irrigation a potential and cost-effective way for fertilizer application.


Sign in / Sign up

Export Citation Format

Share Document