first in first out
Recently Published Documents


TOTAL DOCUMENTS

211
(FIVE YEARS 81)

H-INDEX

14
(FIVE YEARS 2)

2021 ◽  
Vol 6 (2) ◽  
pp. 50-56
Author(s):  
Arief Adi Saputro ◽  
Catur Retno Lestari

Blood transfusion is the process of distributing blood from donors to patients with the aim of replacing blood lost due to bleeding, surgery, shock and malfunctioning of the blood-forming organs that require replacement blood in the form of whole blood or blood components. Blood is stored with the First in First Out (FIFO) system, which is a system that regulates the expulsion of blood in which the first blood that enters will be removed first. The storage period of blood will experience changes in blood components, especially erythrocytes will experience significant changes in shape over the length of time blood storage. The purpose of this study was to determine the difference in hemoglobin levels of donor blood before and after storage for 7 days. This research was conducted at the Blood Transfusion Unit of PMI Kudus Regency. The number of samples used as many as 15 samples. The results showed that there were differences in hemoglobin levels before storage and after storage for 7 days (0.000). The average value before storage was 14.7 g/dl, after storage for 7 days 18.2 g/dl, the highest hemoglobin before storage was 15.4 g/dl, the highest after storage was 18.2 g/dl, while the lowest hemoglobin was before storage. storage 14.0 gr/dl and after storage 17.3 gr/dl. The conclusion is there is a significant difference between hemoglobin levels before storage and after storage for 7 days.


2021 ◽  
Vol 8 (4) ◽  
pp. 1759-1771
Author(s):  
Fhizyel Nazareta ◽  
Iskandar Fitri ◽  
Fauziah Fauziah

Sistem reservasi merupakan sistem untuk mengetahui informasi pelayanan jasa tertentu. Sistem reservasi service gadget ini bertujuan untuk memudahkan konsumen dalam melakukan pendaftaran atau reservasi karena dilakukan secara online, sehingga para konsumen tidak perlu menunggu untuk mengikuti antrian yang panjang saat reservasi manual. Oleh karena itu aplikasi ini dibuat dan diperlukan sebagai solusi dari masalah seperti antrian panjang saat reservasi secara komputasi berbasis website. Penerapan metode yang dilakukan dalam pembuatan sistem aplikasi service gadget ini, yaitu metode Antrian First In First Out  yang menerapkan Single Channel-Single Phase. Pada aplikasi ini Konsumen melakukan reservasi antrian service pada halaman reservasi order service, setelah data terkirim selanjutnya akan diproses oleh sistem untuk di verifikasi. Setelah itu sistem akan menampilkan halaman bukti reservasi untuk dicetak oleh konsumen sebagai bukti sudah melakukan reservasi. Pengujian yang dilakukan melakukan perbandingan pada web browser seperti Microsoft Edge membutuhkan waktu 53 detik untuk melakukan reservasi dengan menjalankan aplikasi reservasi service gadget, sedangkan pengujian pada Mozilla Firefox 54 detik dan Google Chrome 58 detik. Selain itu dalam penggunaan memori (RAM) Microsoft Edge memakai 168,4KB, sedangkan pengujian pada Mozilla Firefox 212,6KB dan Google Chrome 274,0KB.


2021 ◽  
Vol 18 (2) ◽  
pp. 199-210
Author(s):  
W Tamara ◽  
Nurviana ◽  
Amelia

Proses antrian merupakan suatu prosesyang berhubungan dengan kedatangan pelanggan pada suatu fasilitas pelayanan, menunggu dalam baris antrian apabila belum mendapat pelayanan, dan akhirnya meninggalkan fasilitas pelayanan tersebut sesudah mendapatkan pelayanan. Mengantri merupakan salah satu fenomena yang sering terjadi dalam kehidupan sehari-hari dan sering kita temui dalam fasilitas-fasilitas pelayanan umum. Tingginya arus kedatangan nasabah pada waktu-waktu tertentu mengakibatkan antrian yang panjang dan lama sehingga nasabah bosan menunggu. Penelitian ini dilakukan pada Pegadaian Syariah Kantor Cabang Langsa. Adapun tujuan dari penelitian ini adalah untuk melihat rata-rata waktu pelayanan, untuk mengetahui kinerja sistem antrian, dan untuk menganalisis model antrian yang diterapkan. Model struktur antrian yang digunakan pada Pegadaian Syariah Kantor Cabang Langsa adalah Single Channel – Single Phase dan Single Channel – Multi Phase dengan karakteristik antrian First In First Out (FIFO). Untuk menentukan pemodelan antrian maka diperlukan data waktu kedatanagan dan waktu pelayanan pada Pegadaian Syariah Kantor Cabang Langsa. Pada hasil analisis, model yang diperoleh di Pegadaian Syariah Kantor Cabang Langsa adalah (M/G/1);(FIFO/∞/∞) dengan waktu terpanjang nasabah untuk menunggu dalam antrian (Wq) yaitu 5 Menit dan (M/G/2);(FIFO/∞/∞) waktu terpanjang nasabah untuk menunggu dalam antrian (Wq) yaitu 8 menit pada pelayanan pertama, 27 menit pada pelayanan kedua.


Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8171
Author(s):  
Asfandyar Khan ◽  
Arif Iqbal Umar ◽  
Arslan Munir ◽  
Syed Hamad Shirazi ◽  
Muazzam A. Khan ◽  
...  

The Internet of things (IoT) enables a diverse set of applications such as distribution automation, smart cities, wireless sensor networks, and advanced metering infrastructure (AMI). In smart grids (SGs), quality of service (QoS) and AMI traffic management need to be considered in the design of efficient AMI architectures. In this article, we propose a QoS-aware machine-learning-based framework for AMI applications in smart grids. Our proposed framework comprises a three-tier hierarchical architecture for AMI applications, a machine-learning-based hierarchical clustering approach, and a priority-based scheduling technique to ensure QoS in AMI applications in smart grids. We introduce a three-tier hierarchical architecture for AMI applications in smart grids to take advantage of IoT communication technologies and the cloud infrastructure. In this architecture, smart meters are deployed over a georeferenced area where the control center has remote access over the Internet to these network devices. More specifically, these devices can be digitally controlled and monitored using simple web interfaces such as REST APIs. We modify the existing K-means algorithm to construct a hierarchical clustering topology that employs Wi-SUN technology for bi-directional communication between smart meters and data concentrators. Further, we develop a queuing model in which different priorities are assigned to each item of the critical and normal AMI traffic based on its latency and packet size. The critical AMI traffic is scheduled first using priority-based scheduling while the normal traffic is scheduled with a first-in–first-out scheduling scheme to ensure the QoS requirements of both traffic classes in the smart grid network. The numerical results demonstrate that the target coverage and connectivity requirements of all smart meters are fulfilled with the least number of data concentrators in the design. Additionally, the numerical results show that the architectural cost is reduced, and the bottleneck problem of the data concentrator is eliminated. Furthermore, the performance of the proposed framework is evaluated and validated on the CloudSim simulator. The simulation results of our proposed framework show efficient performance in terms of CPU utilization compared to a traditional framework that uses single-hop communication from smart meters to data concentrators with a first-in–first-out scheduling scheme.


2021 ◽  
Vol 21 (2) ◽  
pp. 1-16
Author(s):  
Nurtia Widyasari ◽  
Yonathan Palinggi ◽  
Muhammad Hermanto

Abstract:                  The purpose of this study was to compare the valuation of HVS paper inventories with the First In First Out (FIFO) method and the Average method in the Muara Kaman photocopy business in Tenggarong. The analytical tool used is descriptive analysis. The method of descriptive analysis is to describe the nature of something that has been going on at the time the research is being conducted and examines the causes of certain symptoms. Furthermore, this analysis uses the FIFO and Average methods in inventory valuation.                The results of calculations using the average method produce cost of goods sold which is greater than the First In First Out (FIFO) method. On the other hand, the calculation using the First In First Out (FIFO) method will result in a higher ending inventory value than the average method. So if you want to report the value of current assets (especially inventory) is greater then you can use the FIFO method.   Keywords: Inventory Valuation, FIFO, Average


2021 ◽  
pp. 509
Author(s):  
Yanti Yanti ◽  
Timothy Brian Kurniawan

From the preliminary survey, we found a problem where students at SMA Harapan Jaya had never been given knowledge about how to calculate inventory value using the First In First Out (FIFO) method. For this reason, we from the Faculty of Economics will provide a solution in the form of training on how to calculate inventory value using the FIFO method to students at Harapan Jaya High School. The target that we want to achieve in this training is that after the training is held, the students at SMA Harapan Jaya, who previously did not know how to calculate inventory value using the FIFO method, became familiar with using the FIFO method in assessing inventory. The implementation method that we will use in the training consists of several steps. First, conduct a preliminary survey by conducting interviews with the school. Second, prepare training modules. Third, presenting the module online with Zoom media. Fourth, we will give quizzes before and after training. Fifth, asking students to fill out a questionnaire to assess their satisfaction with the training. The outputs of this PKM activity are: Publications at Senapenmas and Pintar held by Universitas Tarumanagara.Dari survey pendahuluan, kami menemukan permasalahan dimana siswa-siswi di SMA Harapan Jaya belum pernah diberikan pengetahuan tentang cara menghitung nilai persediaan dengan metode First In First Out (FIFO). Untuk itu kami akan memberikan solusi dalam bentuk pelatihan cara menghitung nilai persediaan dengan metode FIFO kepada siswa-siswi di sekolah SMA Harapan Jaya. Target yang ingin kami capai dalam pelatihan ini adalah agar setelah pelatihan diadakan, maka siswa-siswi di SMA Harapan Jaya yang sebelumnya belum mengenal tentang cara menghitung nilai persediaan dengan metode FIFO, menjadi paham menggunakan metode FIFO dalam menilai persediaan. Metode pelaksanaan yang akan kami gunakan dalam pelatihan terdiri dari beberapa langkah. Pertama, melakukan survey pendahuluan dengan cara mengadakan wawancara kepada pihak sekolah. Kedua, mempersiapkan modul pelatihan. Ketiga, mempresentasikan modul secara daring dengan media Zoom. Keempat, memberikan contoh kasus sederhana sebelum dan setelah pelatihan kepada siswa-siswi. Kelima, mengevaluasi keberhasilan pelatihan dan meminta para siswa untuk mengisi kuesioner untuk menilai kepuasan mereka atas pelatihan yang telah diberikan. Luaran wajib dari kegiatan PKM ini adalah: Publikasi di Senapenmas dan Luaran Tambahan adalah publikasi di laman Pintar milik Universitas Tarumanagara.


MULTINETICS ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 99-107
Author(s):  
Elli Agustiningsih

Persediaan barang habis pakai merupakan salah satu sarana penunjang kegiatan untuk instansi pemerintahan khususnya di Dinas Pendidikan Kota Bandung. Namun, proses pengelolaannya masih menggunakan Microsoft Excel sehingga hal ini dianggap kurang efekif karena sering terjadinya kesalahan dalam pencatatan sehingga saldo barang persediaan barang tidak akurat dan lamanya dalam pembuatan laporan. Penelitian ini memiliki tujuan untuk memecahkan persoalan yang dihadapi oleh Dinas Pendidikan Kota Bandung dalam mengelola barang persediaan, maka dirancanglah aplikasi sistem informasi persediaan barang habis pakai yang diharapkan dapat mempermudah petugas gudang dalam mengelola data barang masuk, barang keluar dan perhitungan stok persediaan menggunakan metode FIFO (first in first out)  yang efektif dan efisien serta menghasikan laporan persediaan barang yang akurat dan akuntabilitas. Perancangan aplikasi menggunakan Microsoft Visual Studio 2010, metode pengembangan apliaksi menggunakan metode waterfall serta menggunakan metode pengujian black box testing. Aplikasi Sistem informasi persediaan barang habis pakai ini dapat diimplementasikan secara langsung pada pengelolaan inventaris di Dinas Pendidikan Kota Bandung karena dalam perancangan aplikasi ini penulis mengacu pada data hasil observasi dan data hasil wawancara di lapangan secara langsung.


Author(s):  
Kalyani Tekade

Abstract: This paper deals with the designing and verification of first in first out (fifo) using verilog. A FIFO is a memory queue which controls the data flow between two modules. It has the capacity to trigger different flags according to the status of the FIFO such has empty fifo status, half read fifo status, half written fifo status, full fifo status. Both the reading and writing operation can be performed simultaneously as it has dual port memory. After the completion of designing and simulating it on xilinx vivado this report also covers the verification carried out in modelsim. A detailed discussion on the architecture of each module that is writing module, reading module and memory array along with the various test benches and waveforms of simulation and verification is included in the paper.


2021 ◽  
Vol 1 (10) ◽  
Author(s):  
Windri Fauziah ◽  
Emylia Fiskasari
Keyword(s):  

Penelitian ini dimaksudkan untuk mengetahui bagaimana sistem penyimpanan obat psikotropika dan narkotika guna menunjang kualitas obat. Metode penelitian yang digunakan yaitu penelitian kualitatif deskriftif, dengan melakukan pendekatan observasional dengan cara pengumpulan data proses evaluasi penyimpanan obat psikotropika dan narkotika melalui observasi dan wawancara di UPTD Puskesmas Ciranjang pada bulan April - Juni 2021. Cara pengelolaan obat golongan psikotropika dan narkotika di puskesmas dilakukan dengan cara sistem FIFO dan alfabet, dalam pengelolaannya sendiri harus di lakukan oleh petugas farmasi atau apoteker penanggung jawab dan pengeluarannya harus memakai resep dan harus ditandai dengan pena merah, penyimpanan resep harus terpisah dan dilakukan pencatatan dan pelaporan harian oleh petugas farmasi. Dalam pengelolaan psikotropika di UGD dan rawat inap harus dikelola oleh petugas farmasi yang diberi kewenangan oleh apoteker penanggung jawab instalasi. Penyimpanan obat di UPTD Puskesmas Rawat Inap Ciranjang 75% termasuk ke dalam kategori baik, untuk sistem obat golongan psikotropika dan narkotika sendiri menggunakan sistem alafabet, FIFO (First In First Out) dan tidak menggunakan sistem LASA (Look Alike Sound Alike).


2021 ◽  
Vol 9 (3) ◽  
pp. 425
Author(s):  
Yustika Yustika ◽  
Adia Nugraha ◽  
Rabiatul Adawiyah

The purposes of this study are to analyze cost-efficient control of feed raw material inventory, anticipate shortages of supply, determine the correct time frame for reordering raw materials at the feedlot company PT Indo Prima Beef using the Economic Order Quantity (EOQ) mathematical model and determine the inventory value of raw materials with the First In First Out (FIFO) assessment model. Data collection was carried out in March-May 2020 using a case study method.  The data used were primary data collected using questionnaires and secondary data from literature studies. The results showed that the inventory cost applied by PT Indo Prima Beef was different from the calculation of the EOQ model. According to EOQ analysis, the largest amount of safety stock is corn sugarcane as much as 139,725.95 kg, and the lowest amount is salt around 870.63 kg. The reorder point for PT Indo Prima Beef with the largest amount was dry onggok as much as 139,926 kg, while the lowest amount was 724.87 kg of salt. PT Indo Prima Beef uses a perpetual recording system with the First In First Out (FIFO) inventory valuation method with a total raw material inventory value of IDR2,129,685,820 in one year.Key words: EOQ,FIFO, inventory, supplies 


Sign in / Sign up

Export Citation Format

Share Document