Graphene for Antimicrobial and Coating Application

Graphene is a versatile compound with several outstanding properties, providing a combination of impressive surface area, high strength, thermal and electrical properties, with a wide array of functionalization possibilities. This review aims to present an introduction of graphene and presents a comprehensive up-to-date review of graphene as an antimicrobial and coating application in medicine and dentistry. Available articles on graphene for biomedical applications were reviewed from January 1957 to August 2020) using MEDLINE/PubMed, Web of Science, and ScienceDirect. The selected articles were included in this study. Extensive research on graphene in several fields exists. However, the available literature on graphene-based coatings in dentistry and medical implant technology is limited. Graphene exhibits high biocompatibility, corrosion prevention, antimicrobial properties to prevent the colonization of bacteria. Graphene coatings enhance adhesion of cells, osteogenic differentiation, and promote antibacterial activity to parts of titanium unaffected by the thermal treatment. Furthermore, the graphene layer can improve the surface properties of implants which can be used for biomedical applications. Hence, graphene and its derivatives may hold the key for the next revolution in dental and medical technology.

Analisis Termodinamika dan Kinetika Nanopartikel Karbon (C-Dot) dari Buah Durian Sebagai Inhibitor Korosi Tembaga

Corrosion is a physical interaction between the metal and its environment, which results in changes in the metal's properties due to chemical or electrochemical reactions. The corrosion rate can be reduced by adding a corrosion inhibitor. Uses of nanotechnology for corrosion prevention is one of the first technical because almost made structures rely on the stability of a 1–2 nm thick passive film which provides stability to the underlying material. Herein we report the thermodynamic and kinetic analysis of carbon-dots from Durian as inhibitor copper corrosion. To test the anticorrosive performance and analyze thermodynamic properties in its role as a corrosion inhibitor on copper using potentiodynamic polarization. The thermodynamic-kinetic parameters of corrosion obtained values of H‡ = 60.44 kJmol-1, ΔS‡ = -73.9 kJmol-1, and ΔG‡ = 82.83 kJmol-1, show that the attendance of C-dot as a corrosion inhibitor causes a non-spontaneous reaction rate to be proven by increasing spontaneity (ΔG‡). The value of activation energy samples was higher than the blank, indicates the presence of C-dot effective to reduce the rate of corrosion of the metal.

Modifikasi Proses Pengolahan Boiler Feed Water (BFW) dari All Volatile Treatment (AVT) menjadi Oxygenated Treatment (OT) untuk Produksi Listrik Ramah Lingkungan

In power plant industries, boiler feed water (BFW) quality becomes the main parameter for steam generation, which is used for electricity production. To generate standard BFW for power plants, each impurity within water resources should be removed to prevent corrosion and scale deposition by several processes such as sedimentation, coagulation, polishing, and deaeration. Operation conditions that involved high temperature would trigger corrosion as a crucial factor in the maintenance and practical lifetime of the equipment. In the beginning of the operation, PT. Cirebon Electric Power (CEP) used All Volatile Treatment–Reduction (AVT-R) by injection of both ammonia and hydrazine. In order to optimize the operation, the BFW treatment was changed to All Volatile Treatment–Oxidation (AVT-O) that only uses of ammonia and deaerator for removing the dissolved gas. Based on the actual evaluation, AVT technology showed less performance related to corrosion prevention and high chemical consumption. Therefore, PT. CEP tried to implement modification in the BFW treatment, which is AVT technology to Oxygenated Treatment (OT). This paper is to evaluate the effect of those modifications on corrosion prevention and resource-energy saving. The modification into OT showed valuable results that decrease concentration of dissolved Fe from 1 ppb to 0.1 ppb in the deaerator outlet stream. This data reveals that good corrosion prevention can be achieved through the creation of passive layers, hematite Fe2O3. Oxygen injection into the water circulation system yielded an oxidation atmosphere so that the passive layer, Fe2O3, was formed. In addition to corrosion prevention, this modification also cut the amount of ammonia injection into the system from 2 ppm to 0.12 ppm. Reduction of that ammonia injection provides other benefits such as decreasing the volume of resin regeneration, which becomes only twice a month. This situation also created other benefits such as reducing the regeneration water, chemicals, and wastewater. Thus, the modification could establish the electricity production by PT. CEP more environmentally friendly and sustainable.A B S T R A KPada operasi PLTU, kualitas boiler feed water (BFW) menjadi parameter yang krusial untuk menghasilkan steam yang akan digunakan untuk memproduksi listrik. Untuk mendapatkan BFW sesuai dengan standar yang ada, maka pengotor di dalam air baku industri harus dihilangkan karena dapat menyebabkan korosi dan pembentukan kerak, baik pada pipa maupun peralatan. Kondisi operasi yang melibatkan steam pada suhu tinggi menyebabkan korosi menjadi masalah yang krusial terutama terkait dengan maintenance dan umur efektif pabrik. Pada awal berdirinya, PT. Cirebon Electric Power (CEP) menggunakan teknologi All Volatile Treatment–Reduction (AVT-R) dengan injeksi amonia dan hidrazin. Selanjutnya, dilakukan optimasi melalui perubahan proses menjadi All Volatile Treatment–Oxidation (AVT-O) dengan hanya menginjeksikan amonia dan mengoptimalkan fungsi deaerator untuk menghilangkan pengotor dissolved gas. Berdasarkan data lapangan, teknologi AVT yang digunakan kurang memberikan pencegahan korosi yang baik dan juga jumlah bahan kimia yang digunakan masih relatif banyak. Agar lebih ramah lingkungan dan handal, PT. CEP berusaha untuk melakukan modifikasi terhadap pengolahan boiler feed water (BFW) dari yang semula menggunakan teknologi AVT-O menjadi Oxygenated Treatment (OT). Penelitian ini bertujuan untuk mengevaluasi dampak modifikasi sistem AVT menjadi OT pada pencegahan korosi dan juga penghematan sumber daya. Modifikasi sistem AVT-O menjadi OT berhasil menurunkan konsentrasi dissolved Fe dari 1 ppb menjadi 0,1 ppb pada BFW. Hal ini menunjukkan terjadinya peningkatan pencegahan korosi melalui pembentukan double protective layer yang merupakan kombinasi magnetite (Fe3O4) dan hematite (Fe2O3). Injeksi oksigen ke dalam sistem mengubah kondisi air menjadi suasana oksidasi sehingga mampu mengubah dan membentuk lapisan baru sebagai pencegahan korosi. Selain pencegahan korosi, modifikasi ini juga berhasil menurunkan jumlah injeksi amonia dari 2 ppm menjadi 0,12 ppm dalam siklus air yang ada. Penurunan jumlah injeksi amonia ini akan memberikan keuntungan beruntun berupa berkurangnya frekuensi regenerasi resin dari semula 8 menjadi 2 kali perbulan. Kondisi ini akan menghasilkan penghematan sumber daya berupa kebutuhan air untuk regenerasi, bahan kimia amonia, dan beban pencemaran. Oleh karena itu, modifikasi ini telah membuat proses produksi listrik di PT. CEP lebih ramah lingkungan dan berkelanjutan.Kata kunci: All Volatile Treatment (AVT); efisiensi energi; korosi boiler; Oxygenated Treatment (OT)

SOME PARTICULAR ASPECTS OF THE AUTOMOTIVE INDUSTRY CONNECTORS

Electrical connectors are very sensitive parts in an electronic system. The actual meaning of reliability and the problems associated with determining it, are often not right understood. The paper presents some particular aspects of the automotive industry connectors’ i.e. fretting, fretting corrosion prevention, aluminium connections. The performance factors governed by the operating conditions and design-technology factors determined by the manufacturing characteristics of a contact unit were analyzed.