PERANCANGAN SISTEM INFORMASI RETENSI REKAM MEDIS PASIEN RAWAT JALAN MENGGUNAKAN VISUAL STUDIO 2010

This research is based on retention activities in a hospital that are still done manually. Storage activities that are still carried out manually greatly affect the performance of medical record officers because of the length of time it takes and also affects the storage of medical record files in the storage room. The purpose of this research is to create a retention information system. Where the design of this retention information system can provide information about the processing and reporting of retention carried out in a hospital. This retention information system contains data that supports the presentation of information needed by medical record officers. In addition, this retention information system helps make it easier for medical record officers to store medical record files quickly and accurately, as well as assist officers in the data reporting process. Data are collected through observation, interviews, and literature study. The results of this study indicate that this retention information system makes it easier for officers to do retention more quickly and precisely, especially in terms of data reporting. Keywords: design; informations system; microsoft visual studio 2010; retention. Abstrak: Penelitian ini dilatarbelakangi oleh kegiatan retensi di suatu rumah sakit yang masih dilakukan secara manual. Kegiatan retensi yang masih dilakukan secara manual ini sangat mempengaruhi kinerja petugas rekam medis karena lamanya waktu yang dibutukan dan juga berpengaruh terhadap penyimpanan berkas rekam medis di ruang penyimpanan. Tujuan penelitian ini adalah untuk membuat sistem informasi retensi. Dimana perancangan sistem informasi retensi ini dapat memberikan informasi mengenai pengolahan dan pelaporan retensi yang dilakukan di suatu rumah sakit. Sistem informasi retensi ini terdapat data yang mendukung penyajikan informasi yang dibutuhkan oleh para petugas rekam medis. Selain itu, sistem informasi retensi ini membantu memudahkan petugas rekam medis untuk meretensi berkas rekam medis dengan cepat dan tepat, dan juga membantu petugas dalam proses pelaporan data. Pengumpulan data dilakukan melalui observasi, wawancara dan literatur review. Hasil penelitian ini menunjukan bahwa sistem informasi retensi ini mempermudah petugas untuk melakukan retensi lebih cepat dan tepat terutama dalam hal pelaporan data. Kata kunci: microsoft visual studio 2010; perancangan; retensi; system informasi.

Archive access robot for smart archive repositories

Purpose Managing archives using robots rather than people can considerably enhance efficiency, while need to modify the structure of archive shelves or installation tracks. This paper aims to develop a fully automated archive access robot without modification. Design/methodology/approach First, a mobile navigation chassis and a motion algorithm based on laser ranging and map matching are created for autonomous movement to any of the archives’ locations. Second, because the existing archives are stacked vertically, the bionic manipulator is made to mimic the movement of manual access to the archives, and it is attached to the robot arm’s end to access different layers of archives. In addition, an industrial camera is used to complete barcode identification of the archives and acquire data on their location and thickness. Finally, the archive bin is created to store archives. Findings The robot can move, identify and access multiple archival copies placed on floors 1–6 and 2–5 cm thick autonomously without modifying the archival repository or using auxiliary devices. Research limitations/implications The robot is currently able to navigate, identify and access files placed on different levels. In the future, the speed of the robot’s navigation and the movement of the robot arm could be even faster, while the level of visualization of the robot could be further improved and made more intelligent. Practical implications The archive access robot developed by the authors makes it possible for robots to manage archives instead of human, while being cheaper and easier to deploy than existing robots, and has already been tested in the archive storage room of the State Grid maintenance branch in Jiangsu, China, with better results. Social implications The all-in-one archive access robot can replace existing robotic access solutions, promote intelligent management of the archive industry and the construction of unmanned archive repositories and provide ideas for the development of robots for accessing book-like materials. Originality/value This study explores the use of robots to identify and access archives without changing archive shelves or installing auxiliary devices. In this way, the robot can be quickly applied to the storage room to improve the efficiency of archive management.

Space Transformation in Residential House Small Entrepreneurs Banana Sale

Space transformation occurs in line with the needs and availability of resources owned by space users. The arrangement and utilization of space is carried out to optimize the function of the space owned and the limited space owned by the space user requires an adjustment in the use of the space owned to achieve business goals as well as the comfort of the living environment. Pante Bidari is a banana sale producing area in Aceh, which is located in East Aceh Regency, where the majority of the people work as small entrepreneurs and workers in the Banana Sale Industry. The process carried out when producing Pisang Sale uses a special room consisting of a storage room, peeling room, sale room and packaging room. This study aims to determine how the transformation of space in a small banana sale house. The method used in this research is a qualitative method. This study found that the spatial transformation that occurred in the small businessman's house of Pisang Sale in Pante Bidari District, East Aceh Regency is one way to optimize the utilization and utilization of space, so that the Pisang Sale production room consists of storage room, stripping room, sale room and packaging room. using residential space as an aspect of activity in residential homes, so that ongoing activities are not disturbed by other activities, residential space in terms of space dimensions there are changes that include addition, reduction and movement of space aimed at adjusting space requirements. Judging from the spatial relationship, there are several spaces that are far from each other and close to each other, so that access to activities carried out can optimize the function of the space.

Hygrothermal simulation on effective dehumidification methods in a museum storage room

The hygrothermal environment must be controlled in facilities like museums and galleries to suitably conserve the stored cultural artifacts. The present study proposes a humidity control technique for a museum storage room in Kyoto, Japan. This method requires limited energy and no large-scale equipment or major building renovation. The relative humidity of the room measured during the preliminary field survey exceeded the range for the conservation of metal artifacts (under 45%RH) throughout the year, and dehumidification was experimentally performed. The possible range of humidity control and the energy are quantitatively evaluated in the present study by simulating varied ways of operating a dehumidifier in combination with the improvement of the room’s property of being airtight. The results of the study indicated that simple building modifications and operational improvements could improve the storage environment. For instance, measures to ameliorate airtightness and sensing control along with the addition of small-scale equipment such as a home-use compressor-type dehumidifier can yield long-term low humidity suitable for the conservation of metal cultural artifacts. Such measures are also considered advantageous in terms of energy and labor consumption.

Maize seed quality with fungicide treatment during the storage period

In some areas, farmers sometimes delay planting due to several factors, including: unfavorable climate, unprepared land and insufficient manpower so that planting takes a long time. As a result, seeds that have been given a fungicide cannot be planted and stored under uncontrolled conditions, both at the place and temperature of the storage room. Therefore, the purpose of this study was to determine the storage resistance of seeds that have been given a fungicide (saromyl) so that they can be used as a reference for storing seeds of saromyl. The research was carried out in June - December 2020 at the seed quality testing laboratory of the Cereal Crops Research Institute (Balitsereal), Maros, South Sulawesi Province. The corn seeds used in the study were Bisma 2018 and 2019, Sukmaraga 2017 and 2019, Srikandi Kuning 2018 and 2019, Lamuru 2017 and 2019 varieties. Observations were made on 1000 grain weight, moisture content, electrical conductivity, maximum growth potential, seed growth speed, length of primary root, length of shoot and number of secondary roots. This study used a completely randomized design with 4 replications. The results showed that at room temperature storage (25-26°C and relative humidity 50-58%) the seeds that had been given a fungicide (saromil) with a storage period of 21 days still had high seed quality. Even at low temperature storage (18-18.9°C and Rh 50-55%) during the 6-month storage period, the quality of the seeds was very good. The shelf life of seeds that have been given a fungicide (saromil), is influenced by the shelf life of the seeds, the temperature and relative humidity of the storage room.

Von Rossen und Wagen: Das Verhältnis von Stadt und Land in der Ulmer Reformation

This essay addresses the question of how the city and its territory (Umland) were related in the reformation process. Its object of investigation is the imperial city of Ulm which owned one of the largest territories. The assumption that in the reformation process the city was the outrider and the territory followed proves adequate only at first view. A closer look shows some more complex dynamics. Whereas reformation preaching indeed did spread from the city into the territory, the practice of a reformed eucharist started at the edges of the territory. After the official introduction of the reformation in 1531 the territory played an important role concerning reformatory diversity. It served the city as religious experiment space and storage room.

Evaluation of a seed storage facility in relation to preserving seed moisture, vigour and germination

The performance of a solar energy-assisted seed storage room was evaluated through an ordinary 22-m3 room that was retrofitted with a solar collector, inlets and chimney. The structure was made of a solar collector to heat the ambient air before entering the chimney. The chimney circulated the air inside the structure and inlets. To compare the performance of the modified storage room, a room with a similar capacity and without the retrofitted components (control storage room) was used. Twelve 8 kg bags of maize were stored in each storage room for a period of three months. Samples were taken every two weeks to determine germination rate, moisture content and seed vigour. The temperature and relative humidity (RH) was measured during storage. The RH in the control storage was significantly higher (P≤0.05) (60.6 ± 5.87%) than in the modified storage (40.1 ± 3.21%) during the day. However, at night, the RH in the control storage room was significantly lower (P≤0.05) (58.5 ± 7.32%) than in the modified storage (63.7 ± 6.28%). The RH in the modified storage room increased from 40.1% during the day to 63.7% at night. The RH in the control storage room decreased slightly from 60.6% to 58.5% during the day and night. The seed moisture content in the modified storage facility was significantly lower (P≤0.05) (12.6 ± 0.21%) than in the control storage room (13.3 ± 0.52%). The moisture content in the modified storage room decreased from 12.6% to 12.4%, whereas in the control room, moisture content increased from 12.6% to 13.8% in three months. The seed germination rate obtained after three months of storage in the modified storage room was significantly higher (P≤0.05) (98.5 ± 0.85%) than in the control storage room (96.8 ± 1.49%).The seed vigour obtained in the modified storage room was significantly higher (93.6 ± 0.35%) than in the control room (91.7 ± 2.08%) (P≤0.05). Seed stored in the control storage lost vigour at a faster rate, compared to the seeds stored in the modified storage room. Therefore, the modified naturally-ventilated seed storage room maintained seed quality better than the control storage room.

Analisis Retensi Rekam Medis Rawat Jalan Aktif ke Inaktif di UPT Puskesmas Sukarasa

Medical record retention is an activity of transferring medical record documents from an active storage room to an inactive storage room. Based on a preliminary survey at UPT Puskesmas Sukarasa, it is known that the puskesmas has retained outpatient medical record files 2 times in 2018 and 2019. But the retention is not done according to the SOP. The purpose of the study was to determine the implementation of outpatient medical record file retention at UPT Puskesmas Sukarasa. This type of research is descriptive with a retrospective approach. The research instrument was carried out by observation, interviews and checklist forms. The object of the research is the implementation of active to inactive outpatient medical record retention at UPT Puskesmas Sukarasa. The research subjects are the officer in charge of medical records and the person in charge of registration who performs retention of outpatient medical records.It is also known that the UPT Puskesmas Sukarasa already has an SOP on retention of medical records, but the SOP has not been implemented due to the lack of special staff for retention and the accumulation of medical record files on active storage shelves. Files that are retained are files for 2016-2018 without looking at the last date of treatment but based on the year number in the medical record file. Then the file is immediately moved to the inactive storage rack. It can be concluded that the implementation of retention at UPT Puskesmas Sukarasa is not in accordance with the SOP. It would be better if the retention is carried out according to the SOP with special and scheduled officers so that there is no accumulation of medical record files.

An Efficient HVAC Network Control for Safety Enhancement of a Typical Uninterrupted Power Supply Battery Storage Room

Lead-acid batteries utilised in electrical substations release hydrogen and oxygen when these are charged. These gases could be dangerous and cause a risk of fire if they are not properly ventilated. Therefore, this research seeks to design and implement a network control panel for heating, ventilation, and air conditioning system (HVACS). This is achieved by using a specific range of controllers, which have more than thirty loops of proportional, integral, and derivative (PID) control to achieve a cost-effective design. It performs the required function of extracting hydrogen and oxygen, maintaining the desired temperature of the battery storage room within recommended limits (i.e., 25 ± 1 °C tolerance) without compromising quality, as set out in the user requirement specification. The system control panel allows the user to access control parameters such as changing temperature set-points, fan-speed, sensor database, etc. It does this automatically and allows no human interface after all necessary settings and installation are completed. The hardware is configured to detect extreme hydrogen and oxygen gas content in the battery room and to ensure that the HVACS extracts the gas content to the outside environment. The system’s results show that the network control panel operates effectively as per the recommended system requirements. Therefore, the effective operation of the HVACS ensures sufficient gas ventilation, thus mitigating the risk of fire in a typical battery storage room. Furthermore, this also enhances battery lifespan because of regulated operating temperature, which is conducive to minimise the effect of sulfation in lead–acid batteries (LAB). The extraction of toxic gases, regulation of temperature, ensuring suitable humidity in UPS battery room is important as it provides longer operational service of equipment, thus reducing frequent maintenance in these rooms. This benefits the electricity supply industry and helps in saving for unplanned maintenance costs.

First Report of Pyrus pyrifolia ‘Cuiguan’ Fruit Rot Caused by Monilinia fructicola in Southern China

The early-ripening pear (i.e., Asian pear; Pyrus pyrifolia (Burm. f.) Nak.) cultivar ‘Cuiguan’ is an important fruit crop in southern China. In July 2020, an unknown fruit rot was observed on pear, which were harvested from an orchard in Xiajiang County of Jiangxi Province (27.62° N, 115.33° E), during storage in postharvest lab of Jiangxi Agricultural University. The incidence of this disease was 15% of 1000 post-harvest pear fruit (P. pyrifolia cv ‘Cuiguan’) after 10 d in storage room (20°C, 90% relative humidity). Initial symptoms were small brown nearly circular (diameter 10-20 mm) lesions with water-soaked edges on the fruit surface. The lesions expanded as concentric circles, and a gray-white mold developed in the center of the lesions. Ten fruits with typical symptoms were collected and surface-sterilized with 75% ethanol for 30 s. Small fragments (5×5 mm) at the junction of diseased and healthy tissues were disinfected with 1% sodium hypochlorite for 2 min, washed with sterile water 3 times, transferred to potato dextrose agar (PDA), and incubated at 28 ± 1℃ for 3 days. Five fungal colonies that looked similar were single-spored. The resultant fungal colonies produced irregular concentric rings with abundant gray-white aerial mycelia and gradually turned gray-brown. Conidia were unicellular, hyaline, lemon-shaped, 11.1-24.8 × 10.3-17.4 μm (n=50) in size and were produced in branched monilioid chains. These morphological characteristics were consistent with Monilinia fructicola (G. Winter) Honey (Hilber-Bodmer et al. 2010; Peter et al. 2015). To further confirm the species identification, genomic DNA of a representative isolate was obtained using an extraction kit (Biocolor, Shanghai, China), and primers ITS1/ITS4 (Munda et al. 2010), IMf F/IMf R (Ma et al. 2003), MO368-5 F/MO368-10 R (Côté et al. 2004), Mon-TubF1/Mon-TubR1, and Mon-G3pdhF/Mon-G3pdhR (Hu et al. 2011) were used to amplify the internal transcribed spacer (ITS), microsatellite, and polymorphic regions, as well as the glyceraldehyde-3-phosphate dehydrogenase (g3pdh) and beta-tubulin (tub2) genes, respectively. A BLAST search with obtained DNA sequences (GenBank Accession No. MW740236, MW788382, MW788383, MZ243141, and MZ243142, respectively) indicated 100% identity with M. fructicola (GenBank Accession No. LC312668.1 (513/513 bp), AY237426.1 (438/438 bp), FM994904.1 (490/500 bp), MN709392.1 (744/744 bp), and HQ908768.1 (1534/1534 bp), respectively). To confirm pathogenicity, 20 μl of a spore suspension (1.0 × 106 spores/ml) prepared from 7-day old PDA colonies of each of the five isolates was applied to the surface of 10 needle-wounded and 10 nonwounded, surface-disinfected ‘Cuiguan’ pear fruit. Ten wounded and nonwounded pears were inoculated with sterile water as controls. The experiment was repeated three times. All fruit were incubated at 25℃, 90% relative humidity. After 5 days, all wounded and nonwounded pears inoculated with M. fructicola showed symptoms similar to those observed in the storage room. Symptoms of nonwounded pears were milder than the wounded inoculated pears, while the control fruit remained healthy. A fungus with similar morphology to M. fructicola was re-isolated from the inoculated fruits, and thus, Koch’s postulates were fulfilled. To our knowledge, M. fructicola has been reported to cause brown rot of pear fruit in northern China (Zhu et al. 2016), but this is the first report of M. fructicola causing rot on P. pyrifolia in southern China. As an emerging rot disease in this region, and based on its economic importance in other pear growing regions, its presence is of concern the ‘Cuiguan’ pear fruit industry.