Physiological Response of an Oil-Producing Microalgal Strain to Salinity and Light Stress

By separating and extracting algae from the collected water samples, an oil-producing diatom strain was obtained. Microscopic observation of the strain revealed that its morphological characteristics were highly similar to those of the genus Cyclotella. The cloning of 18S rDNA and phylogenetic analysis showed that the algae were clustered with Cyclotella menegheniana with a high support rate, indicating that the alga was C. menegheniana. The fatty acid content of the alga was determined and found to be mainly C14, C16, and C18 fatty acids, which were in accordance with the relevant standards for edible oil. In this study, different gradient levels of salinity and light were set to investigate the culture and bioactive substance production of C. menegheniana. The results showed that the best growth condition was achieved when the salinity was 15 g·L−1, and its biomass and oil content were the highest at 0.27 g·L−1 and 21%, respectively. The final biomass was the highest when the light intensity was 2000 Lux and the oil content was 18.7%. The results of the study provided a basis for the large-scale production of edible oils and biodiesel.

Innovative and Sustainable Technologies to Enhance the Oxidative Stability of Vegetable Oils

To meet consumers’ demand for natural foods, edible oil producers and food processing industries are searching for alternatives to synthetic antioxidants to protect oils against oxidation. Antioxidant compounds extracted from different plant parts (e.g., flowers, leaves, roots, and seeds) or sourced from agri-food industries, including residues left after food processing, attract consumers for their health properties and natural origins. This review, starting from a literature research analysis, highlights the role of natural antioxidants in the protection of edible oils against oxidation, with an emphasis on the emerging and sustainable strategies to preserve oils against oxidative damage. Sustainability and health are the main concerns of food processing industries. In this context, the aim of this review is to highlight the emerging strategies for the enrichment of edible oils with biomolecules or extracts recovered from plant sources. The use of extracts obtained from vegetable wastes and by-products and the blending with oils extracted from various oil-bearing seeds is also pointed out as a sustainable approach. The safety concerns linked to the use of natural antioxidants for human health are also discussed. This review, using a multidisciplinary approach, provides an updated overview of the chemical, technological, sustainability, and safety aspects linked to oil protection.

A novel bleaching approach: Microwave assisted sunflower oil bleaching and optimization

The factors affecting the microwave bleaching of sunflower oil and the interaction between them were investigated and optimized by response surface methodology using a three-factor five-level central composite rotatable design. Microwave power, time and the amount of bleaching clay were selected as independent variables studied in the range of 70-120 W, 2-15 min, and 0.01-0.5%. The dependent variables that measure the bleaching efficiency and oil quality were evaluated as hue angle, chroma and totox value. Optimization was carried out by minimizing totox and chroma and maximizing hue angle. Hue angle, chroma and totox were found as 96.91, 37.66 and 23.31 under optimal conditions. Optimal microwave bleaching was successfully performed by using less bleaching clay (0.4%) and a shorter time (8 min) compared to the current industrial application without any adverse effect on oil quality. Hence, microwave bleaching is thought to be an alternative method for the bleaching of edible oils.

Effects of Repeated Heating on Fatty Acid Composition of Plant-Based Cooking Oils

Several polyunsaturated fatty acids are considered to have beneficial health effects, while saturated fatty acids and industrial trans fatty acids (TFAs) are linked to negative health consequences. Given the increased formation of TFAs during heating, many studies already investigated compositional changes in oils after prolonged heating or at extremely high temperatures. In contrast, our aim was to measure changes in fatty acid composition and in some health-related indices in edible oils after short-time heating that resembles the conventional household use. Potatoes were fried in palm, rapeseed, soybean, sunflower and extra virgin olive oils at 180 °C for 5 min, and samples were collected from fresh oils and after 1, 5 and 10 consecutive heating sequences. Regardless of the type of oil, the highest linoleic acid and alpha-linolenic acid values were measured in the fresh samples, whereas significantly lower values were detected in almost all samples following the heating sequences. In contrast, the lowest levels of TFAs were detected in the fresh oils, while their values significantly increased in almost all samples during heating. Indices of atherogenicity and thrombogenicity were also significantly higher in these oils after heating. The present data indicate that prolonged or repeated heating of vegetable oils should be avoided; however, the type of oil has a greater effect on the changes of health-related indices than the number of heating sequences.

The Influence of Edible Oils’ Composition on the Properties of Beeswax-Based Oleogels

This study aimed to find relationships between the properties of beeswax-based oleogels and the type of oil used. The influence of linseed, sunflower, olive, and fish oils was studied. For these oils, the fatty acid composition, the content of total polar components, and the iodine value were characterized. Textural and thermodynamic properties were determined for oleogels, the oil-binding capacity was estimated, and the morphology of crystals was studied. The concentration of beeswax in all oleogels was 6.0% w/w. It was shown that the type of oil has a significant influence on all characteristics of the oleogels. The use of different oils at the same technological treatment leads to the formation of crystals of diverse morphology—from platelets to spherulites. At the same time, it was revealed that some characteristics of oils have a varying contribution to the properties of oleogels. The content of total polar materials in oils is associated with a decrease in strength parameters (yield value and elastic modulus) and the oil-binding capacity of oleogels. In its turn, the iodine value of oils has a close positive correlation with the melting and crystallization temperatures of oleogels. The results obtained in this article indicate that the properties of beeswax-based oleogels can be directed by changing the oil composition.

Bioactive β-Carbolines Harman and Norharman in Sesame Seed Oils in China

The β-carbolines in our diet, mainly including harman and norharman, are a group of biologically active, naturally occurring plant-derived alkaloids. Fragrant sesame seed oil is one of the most popular flavor edible oils in China. Considering that sesame seeds are roasted at 200–240 °C during the processing of flavor sesame seed oils, it is meaningful to investigate the levels of β-carboline compounds in various sesame seed oils. In this work, the levels of β-carbolines (harman and norharman) in different types of sesame seed oils in China (e.g., pressed fragrant sesame oil, ground fragrant sesame oil) have been determined systematically. The results showed that the levels of total β-carbolines in pressed fragrant sesame oils (700.5~2423.2 μg/kg) were higher than that in ground fragrant sesame oils (660.4~1171.7 μg/kg). Roasting sesame seeds at high temperatures (200–240 °C) led to higher levels of β-carbolines (660~2400 μg/kg) in fragrant sesame seed oils. In addition, the loss of tryptophan might be attributed to the formation of β-carbolines in sesame seeds during the roasting process. In general, fragrant sesame seed oils (pressed fragrant sesame oils, ground fragrant sesame oils) contain higher levels of β-carbolines due to the formation of harman and norharman during the roasting sesame seed process.

Characterization of the Volatile Compounds in Camellia oleifera Seed Oil from Different Geographic Origins

Volatile flavor of edible oils is an important quality index and factor affecting consumer choice. The purpose of this investigation was to characterize virgin Camellia oleifera seed oil (VCO) samples from different locations in southern China in terms of their volatile compounds to show the classification of VCO with respect to geography. Different samples from 20 producing VCO regions were collected in 2020 growing season, at almost the same maturity stage, and processed under the same conditions. Headspace solid-phase microextraction (HS-SPME) with a gas chromatography–mass spectrometer system (GC–MS) was used to analyze volatile compounds. A total of 348 volatiles were characterized, including aldehydes, ketones, alcohols, acids, esters, alkenes, alkanes, furans, phenols, and benzene; the relative contents ranged from 7.80–58.68%, 1.73–12.52%, 2.91–37.07%, 2.73–46.50%, 0.99–12.01%, 0.40–14.95%, 0.00–27.23%, 0.00–3.75%, 0.00–7.34%, and 0.00–1.55%, respectively. The VCO geographical origins with the largest number of volatile compounds was Xixiangtang of Guangxi (L17), and the least was Beireng of Hainan (L19). A total of 23 common and 98 unique volatile compounds were detected that reflected the basic and characteristic flavor of VCO, respectively. After PCA, heatmap and PLS-DA analysis, Longchuan of Guangdong (L8), Qingshanhu of Jiangxi (L16), and Panlong of Yunnan (L20) were in one group where the annual average temperatures are relatively low, where annual rainfalls are also low. Guangning of Guangdong (L6), Yunan of Guangdong (L7), Xingning of Guangdong (L9), Tianhe of Guangdong (L10), Xuwen of Guangdong (L11), and Xiuying of Hainan (L18) were in another group where the annual average temperatures are relatively high, and the altitudes are low. Hence, volatile compound distributions confirmed the differences among the VCO samples from these geographical areas, and the provenance difference evaluation can be carried out by flavor.