AC conductivity and correlation effects in nano-granular Pt/C

Nano-granular metals are materials that fall into the general class of granular electronic systems in which the interplay of electronic correlations, disorder and finite size effects can be studied. The charge transport in nano-granular metals is dominated by thermally-assisted, sequential and correlated tunneling over a temperature-dependent number of metallic grains. Here we study the frequency-dependent conductivity (AC conductivity) of nano-granular Platinum with Pt nano-grains embedded into amorphous carbon (C). We focus on the transport regime on the insulating side of the insulator metal transition reflected by a set of samples covering a range of tunnel-coupling strengths. In this transport regime polarization contributions to the AC conductivity are small and correlation effects in the transport of free charges are expected to be particularly pronounced. We find a universal behavior in the frequency dependence that can be traced back to the temperature-dependent zero-frequency conductivity (DC conductivity) of Pt/C within a simple lumped-circuit analysis. Our results are in contradistinction to previous work on nano-granular Pd/$$\hbox {ZrO}_2$$ ZrO 2 in the very weak coupling regime where polarization contributions to the AC conductivity dominated. We describe possible future applications of nano-granular metals in proximity impedance spectroscopy of dielectric materials.

Statistical odd-even staggering in few fermions systems

The odd-even staggering (OES) in nuclear binding energies is a well-known fact. A rather similar effect can be found in other finite fermion systems. For instance, ultra small metallic grains and metal clusters. The staggering in nuclei and grains is attributed primarily to pairing correlations. In clusters, it is originated by the Jahn–Teller effect [Phys. Rev. Lett. 81, 3599 (1998)]. Here, we work with a simple, Lipkin-like, exactly solvable two-level fermion model. A statistical mechanics’ treatment of it shows that OES effects also emerge here, as revealed by theoretical tools connected with the so-called statistical complexity.

Spectral Explanation for Statistical Odd-Even Staggering in Few Fermions Systems

Odd-even statistical staggering in a Lipkin-like few fermions model has been recently encountered. Of course, staggering in nuclear binding energies is a well established fact. Similar effects are detected in other finite fermion systems as well, as for example, ultra small metallic grains and metal clusters. We work in this effort with the above-mentioned Lipkin-like, two-level fermion model and show that statistical staggering effects can be detailedly explained by recourse to a straightforward analysis of the associated energy-spectra.

Vapor Transport and Deposition of Cu-Sn-Co-Ag Alloys in Vesicles in Mafic Volcanic Rocks

Metallic sublimates coated by sulfides and chlorides line the vesicle walls of mafic volcanic lava and bombs from Kīlauea, Vesuvius, Etna, and Stromboli. The metallic sublimates were morphologically and compositionally similar among the volcanoes. The highest concentrations of S and Cl occurred on the surface of the sublimates, while internally they had less than 1 wt % S and Cl in most cases, leading us to classify them as alloys. The major components of the alloys were Cu, Sn, Co, and Ag based on electron microprobe analyses and environmental scanning electron microscope element maps. Alloy element maps showed a covariance of Cu-Sn, while Co and Ag concentrations varied independently. Laser ablation-inductively coupled plasma-mass spectrometry analysis of matrix glass and melt inclusions in bombs from Stromboli showed appreciable amounts of Cu, Co, and Sn. We propose a model for the origin of the metallic grains, which involves syneruptive and posteruptive magma degassing and subsequent cooling of the basalt vesicles. During syneruptive vapor phase exsolution, volatile metals (Cu, Co, and Sn) partition into the vapor along with their ligands, S and Cl. The apparent oxygen fugacity (fO2) in these vapor bubbles is low because of the relative enrichment of the exsolved gas phase in H2 relative to H2O in silicate melts, due to the much higher diffusivity of the former in silicate melts. The high fH2 and low fO2 induces the precipitation of metal alloys from the vapor phase. Subsequently, the reducing environment in the vesicle dissipates as the cooling vapor oxidizes and as H2 diffuses away. Then, metal-rich sulfides (and chlorides) condense onto the outer surfaces of the metal alloy grains either due to a decrease in temperature or an increase in fO2. These alloys provide important insights into the partitioning of metals into a magmatic volatile phase at low pressure and high temperature.

Picosecond Laser-Induced Hierarchical Periodic Near- and Deep-Subwavelength Ripples on Stainless-Steel Surfaces

Ultrafast laser-induced periodic surface subwavelength ripples, categorized based on the ripple period into near-subwavelength ripples (NSRs) and deep-subwavelength ripples (DSRs), are increasingly found in the variety of materials such as metals, semiconductors and dielectrics. The fabrication of hierarchical periodic NSRs and DSRs on the same laser-irradiated area is still a challenge since the connection between the two remains a puzzle. Here we present an experimental study of linearly polarized picosecond laser-induced hierarchical periodic NSRs and DSRs on stainless-steel surfaces. While experiencing peak power density higher than a threshold value of 91.9 GW/cm2, in the laser-scanned area appear the hierarchical periodic NSRs and DSRs (in particular, the DSRs are vertically located in the valley of parallel NSRs). A large area of the uniformly hierarchical periodic NSRs and DSRs, with the spatial periods 356 ± 17 nm and 58 ± 15 nm, respectively, is fabricated by a set of optimized laser-scanning parameters. A qualitative explanation based on the surface plasmon polariton (SPP) modulated periodic coulomb explosion is proposed for unified interpretation of the formation mechanism of hierarchical periodic NSRs and DSRs, which includes lattice orientation of grains as a factor at low peak power density, so that the initial DSRs formed have a clear conformance with the metallic grains.

Transport characteristics of focused beam deposited nanostructures

We review the transport properties of different nanostructures produced by ion- and electron-beam deposition, as prepared as well as after certain treatments. In general, the available literature indicates that the transport properties are determined by conduction processes typical for disordered metallic grains embedded in a carbon-rich matrix, including intergrain tunneling and variable range hopping mechanisms. Special emphasis is given to the superconducting behavior found in certain Tungsten-Carbide nanostructures that, in a certain field and temperature range, is compatible with that of granular superconductivity. This granular superconductivity leads to phenomena like magnetic field oscillations as well as anomalous hysteresis loops in the magnetoresistance.